For 55 bucks that ridgeline roof tie off seems very good value. And you don't have to worry about removing/moving it during construction. Just put up 3-4 of them and you are good to go, and they are there if needed later for maintenance or addons like solar panels.

@rualert1602

Жыл бұрын

That was my favorite as well. Forwarded it to a builder friend.

@timmyb2549

Жыл бұрын

I feel like it would create a space for snow or high-wind rain to blow back up in.

@jeremyabshire4875

Жыл бұрын

Unfortunately I have 26 screws and 3 pins in my right foot for not using some type of safety device. I'm here to tell you don't try to save money or skimp out in this area. You won't regret it

One of the many things that I appreciate about you guys is that you're always open to new ideas and innovations to improve the way you work. Never stop learning!

Going through stabila like you own the damn place 😂.

Nice show. Thanks for taking us along.

Love the insight you guys provide on Post Frame. Hope you share more trade-show walk throughs.

What a couple of good looking builders. I always learn a lot from you guys, thanks for bringing it to us.

4:11 "A quarter inch down there is inches up there." Oh...you were talking about construction. Right...of course...ahem...uh...well, then 🤣 Have a great day, Kyle and Greg. Love your channel.

15:54 that's like a Forstner bit for the dirt. Very clever.

@RRBuildings

Жыл бұрын

Exactly

Thanks for the video

17:05 you guys look like brothers there. 💙

Now the truth comes out! Kyle is a natural lefty. No wonder he can pound nails left handed SO well! Busted Buddy.

@RRBuildings

Жыл бұрын

I’m a lefty but grew up learning eighty

@lorenrickey5481

Жыл бұрын

@@RRBuildings righty

that little magnetic roof tack gadget for the hammer is gold

'triple dipped' Maze Nails...best galvy ringshanks PERIOD!!

Keep on posting!

Great show! Might have to check that out one day!!

Those nail bags looked pretty good!!! Please give them a shoot

That shear was a lot less than I thought it would be. I think if I built post frame for a living I would buy the straight and another one for the most common pitch you use. It wouldn’t take too long to pay for itself in time savings.

@RRBuildings

Жыл бұрын

Agree 100% that’s why I own a shear

@trevordavis1854

Жыл бұрын

@@RRBuildings sorry David for commenting on your video, just wanted to tag Kyle in case he didn't know this comment section is loaded with spam yet.

@davidturner6509

Жыл бұрын

I’ve seen this same add before when I commented on one of his videos. Glad you maybe brought his attention to it.

I really wish you were on the good end of the State in Southern Illinois. I am going to get my Barndo up this year and will be using the Amish for the task, since they are the only ones I would trust, besides RR builders..

Ridgeline safety is cool.

Excellent video! Lots of cool and useful products. Keep up the great work, and keep those videos coming!!

Hey guys, see you next year in Des Moines, IA. Paul is having an open house out at his place, see you there!

Very cool. Love the new products coming out

Great video Kyle! Love to see the new products!

Absolutely loved this video, awesome tools!

I didn't realise that you sell plans, and I've been watching you for years. Drop that nugget more often. I'm probably 7 years away from building a post frame home, but (now that I know) I'm definitely buying your plans when I get there!

@RRBuildings

Жыл бұрын

Https://rrplans.bigcartel.com/

Wish this video was longer with more products and demonstrations. Really wish I could have been there.

I personally like the hammers with magnetic tip.

@fredericdudley6184

Жыл бұрын

It wasn’t the hammer so much as an attachment. I’m a sucker for a hammer. Probably buy one.

@fredericdudley6184

Жыл бұрын

Yep. Gottem at Von Tobel.

I would like to see the Maze Nails tour.

Lumber yard I spent 32 years at is 155 years old this year

Man Kyle knows how to make a show video. In and out of a booth quick and damn near knows more than the people at the booth!😂

"No, I'm not doing that" That was funny Greg..

Shoutout Peru IL maze nails

See ya in Des Moines next year.

Good on you for always trying to improve an already great product. I have watched your channel for awhile and the improvements are impressive. Both quality of the video and builds. Do you ever take on/consider builds out of state (Beautiful Colorado?)

The hammer magnet looked to be money for the smaller fasteners

MORE MORE MORE

greg said the rivets so that he could say you messed up. Very funny!

The way the guy looked at you when you tested the shear in the first clip 😂

Great show , lots of new and improved tools to make your jobs easier, but.here is a question one for you Greg/Kyle where can you buy a right handed imperial tape measure, i have only seen left handed ones and left and right handed metric tapes.

11:30 Can you drill the head off of the rivet to remove it? Because that's one reason why I will rivet something together, so I can take it apart in the future.

@RRBuildings

Жыл бұрын

Yes

Hi Kyle, just my two Cents 1. Those riveter adapter are garbage don't buy 2. Fall protection: always remember: if you hang in the air you have only few minutes until you must be rescued otherwise you die or have very serious posttraumatic consequences Buy expensive body harness, where you can hang longer without your blood being cut off.

Enjoy seeing RR and Marshall going through the Expo. Kyle, got to get your guys to push your videos faster. Lol. Marshall beat you by a week reviewing the same things. Both videos and guys are great and I enjoy yall. Keep it up.

I love my stabila levels but there warranty and customer service sucks. It would be better if they didn’t have a warranty at all. There’s no point in even trying to make a warranty claim. Just my experience.

Great video as always! I am interested in the roof tie-offs but do not see any to accommodate 2x4 purlins set on edge. Given your typical build practice, Kyle, I would assume you too would be in the market for such a version of these. I will be contacting the Company to see if such a style is forthcoming.

I wonder how many of these company's see a surge once Kyle says he likes it!

@RRBuildings

Жыл бұрын

I’d hope all! They are doing good things they deserve some recognition

@Darnic-Fab

Жыл бұрын

@OfficialRRBuildings. you guys tell me this every time I comment. But I don’t know anything about telegram

What manufacturer do you use for the trusses and do you have them designed by the manufacturer.

@RRBuildings

Жыл бұрын

Atlas truss in Rockford

I am from India and you

It's truly sad that our big home centers do not carry USA made products in addition to the Chinesium. Especially when it comes to nails...

Kyle, I have a possibly dumb question, but you are so approachable on your jobs, I think I'm gonna go ahead and ask ( other commenters be damned). Is post frame basically balloon framing with more modern, better, more well engineered materials? That might be a break through at least in my understanding of an old technique that fell by the wayside because we lacked the quality of natural framing lumber but now have them thanks to modern engineered materials.

@RRBuildings

Жыл бұрын

Very similar… think advanced balloon frame

@matthewerwin4677

Жыл бұрын

Fire safety is another reason balloon framing isn't as popular. Fire can travel from the floor to the attic in seconds.

@georgewelker853

Жыл бұрын

The fire safety is also solved by technology and practices that eliminate a lot of the fire risks

Had no clue this was goin on in my city. Would’ve loved to check it out! Also it’s pronounced Lewey-ville😇

@Kitnkaboodle_64

Жыл бұрын

It’s only pronounced Lewey by those who don’t know that it’s pronounced Luhl ..... 💃

Stupid question for anyone who can help. Can anyone explain why some people space wall girts at 32” opposed to the standard 24”?

Hello sir

Didn’t know Cody Johnson the country singer did building expos

4:49 Made in Germany. You can trust!

Do you have plans for sale for a 40x40 with 12 foot side walls for sale

yo, Greg! 📣

is that a synthetic t-shirt that you're wearing Kyle?

you guys could be brothers. You look exactly alike

Kyle...the gain on your mic needs to be turned up as its too low when compared to other media.

I’ve got a set of weaver bags never buy a different brand best bags on the market

Wait! You forgot your camera!

Now he'll have his tape on him when he does a demo 😂

👍

Just build concrete tilt wall

Hey Greg i hope you read my comment BABE. 😘😳🤣

@NunYaaBizz

Жыл бұрын

U gay

@chrisnelson5877

Жыл бұрын

@@NunYaaBizz no but are you?

Are you sure Greg isn’t your long lost son?

It's okay that you didn't pronounce Louisville quite right. I forgive you.

Concrete walls are better

Anybody need b4akets I'll weld um up, flood the market with lost cost brakets

I think for some reason Greg has to be your offspring 🧑‍🦰