This guy is the best. If I search up something that involves audio or studio stuff, he shows up with the answers and he tells you how to do it in the best way. Keep it up the good vids.

@kettnercreative

3 жыл бұрын

Wow, thanks!

@shaunabbott9236

Жыл бұрын

You may think he's the best but there is still so many negatives and because of this I still don't know what upgrade to buy he has got fault on every mic and they one he kinda didn't is a waste of time as its got a built in one god I'm screwed

Thank you so much my friend! After 2 hours of blind-serching online, your videos just solve all my problem about boom arms for my SM7B!!! Keep your videos going! Your works are great!!!

Here is what I’ve learned in a couple days of watching KZread videos on the 5 $100 or so boom arms. 1.) The Blue Yeti one is trash, even for the Blue Yeti mic. It has some sort of super spring that makes it bounce way up you have to lock it into place. Might as well get a mic stand. That version is also mass produced and I’ve seen it with about 10 different peoples names on it but it’s the same model. GameStop has a logitech version. 2.) The gator frameworks is a little bit better than the blue, but it doesn’t have full 360 rotation, and again you really have to lock it in place at certain angles. The main downside is also the mount and how the weight is supported off the desk instead of over it for support. Other videos say you have to constantly adjust and retighten the stand. 3.) Rode PSA1 and the + version. I guess these are the best ones. I don’t like the version because it has that giant logo. I originally thought it was a light metal or hard plastic cover but then discovered it was neoprene. 4.) Elgato I thought was perfect. Except for that horrible magnetic cover that pops off every time you move the microphone. How did that get by R&D!? It’s like they never actually tested it with a microphone cord. I guess there is really no perfect microphone boom arm.

@jaime5649

2 жыл бұрын

this is all pretty helpful info, if you had to purchase one arm would you go with the RØDE one or the elgato one?

@BudsCartoon

2 жыл бұрын

@@jaime5649 I actually got the Elgato LP. The tall one was impossible to find and they didn't even know when more were available. But after watching even more videos, I think I ended up liking the LP better. Plus I found a guy on Ebay/Etsy who 3D printed the exact Y part I couldn't find to hold my Blue Yeti by the sides instead of locked in from the bottom. The cord issue can be resolved, especially for me because I'm going to start with a usb mic, by electrical taping (I'd recommend Gorilla Glue) the cord to the bottom of the compartment, only leaving enough slack out the last mic side end so when you twist the mic, the cord doesn't pop the lid off... not that it would after being secured by tape. The Elgato by FAR looks the cleanest and functions the best, PLUS the desk mount is like industrial grade!

@jaime5649

2 жыл бұрын

@@BudsCartoon I have a Shure SM7B and went with the gator frameworks one. Most of the negative reviews were over critical and having to do with things that were within control. I don't need anything crazy I just want a mic stand where my SM7B isn't going to sag. I love the look of the elgato LP, maybe if things don't go well with the gator i'll try that one out :)

@erinsaviation1964

2 жыл бұрын

I just wrap a piece of string round my Elgato boom arm's metal cable covers and it works fine

@BudsCartoon

2 жыл бұрын

@@erinsaviation1964 I got the LP, love it. Just used one clean piece of black gorilla tape. looks fine.

Best thing to do with the Rode PSA1 for cable management: unsolder one of the XLR ends on your mic cable and run it THROUGH the arm.. Then re-solder the connector once in place. You can actually see how it was designed for this purpose. The cable will even route through the base clamp. Thanks for the video

I have never seen anyone using the PSA-1 "correctly". There is a protrusion / hole in the upper part of the arm. You can pull the cable through that hole to completely hide it inside the arm. Best looks, best usability. OK, you need to solder one of the XLR plugs after installing the cable. It is worth it!

I opted for the samson MBA28 for my sm7b, it's relatively a cheaper rode psa1, good quality and good enough for small desks, it has the same problem has the rode with the xlr connector bumping if you rotate the mic so be aware.

@kettnercreative

3 жыл бұрын

Thanks for the info! Good to know.

@itsjacobshadow

3 жыл бұрын

ive had mine just over a year and it squeaks so bad. I've tried to fix it it only works temperarly.

@theoutsiderjess1869

2 жыл бұрын

I have the same boom arm and I bought it for the yeti 3 months ago for my birthday because I believe it can hold up to the weight of the sm7b and I was right that arm can hold up not only the blue yeti but also an isolation shield without any of it sagging. Absolutely great boom arm

i just bought the sm7b with the frameworks boom arm, looks so fresh and high quality. and cant go wrong with the built in XLR cable

@kettnercreative

Жыл бұрын

It's a good option for sure. I just don't love the silver connectors or the HUGE tightening knobs.

An excellent comparison. I like the look of the blue compass but settled on the rode in the end.

This video really helped me. Thank you.

The rode one is the best looking and the most iconic by far

Such a thorough review. Really appreciate it!

Just canceled my order on the Blue Compass and went with the frame works. The Blue compass got terrible reviews on amazon. Thanks!

@themediadiamond

Жыл бұрын

How is your frame works doing so far

Thanks very much for this video. Before I watched this I knew nothing about this subject. After watching this video I know exactly what I need to know! And I consequently know what I am going to buy. Thanks a lot. Great work! ☺️

Hey just want to say thank you very much for the informative content. I hope the years been treating you kindly and take care of your self🙏🏽

6:36 On Røde PSA1+ there's a rubber pad there. Also it has a plastic bushing in the hole, so it's smoother I heard in a review by Tom Buck.

omg doing GODS WORK HERE! was looking for a video comparing them!

@kettnercreative

2 жыл бұрын

Glad you liked it.

Desk top one seems okay for now but definitely looking for a PSA soon 👌🏽 Awesome vid thanks a lot !

Yellowtec M!ka arms are awesome but probably in a different price range compared to the ones featured here.

Thank you.EXACTLY the information im looking for

@kettnercreative

2 жыл бұрын

Glad it was helpful!

No-nonsense video. Loved it!

I'll be using my shure sm7b with an elgato wave lp mic arm

@sc-nc6bb

Жыл бұрын

all good?

@erinsaviation1964

Жыл бұрын

@@sc-nc6bb yes, Its going really well I am using my xm8500 on the lp mic arm and will get the sm7b soon

@sc-nc6bb

Жыл бұрын

@@erinsaviation1964 I read on amazon that the shure is too heavy for the elgato wave lp mic arm, let me know when you try it, thanks

@erinsaviation1964

Жыл бұрын

@@sc-nc6bb That isn't true, you'll just need to tighten the mic arm, don't buy from amazon

Great content!

Great comparisons, good info.

awesome review! very helpful to my next buy. great job!

Thank you very much, super helpful review

Great video! Will probably get the table top and upgrade to gator later

Gator framworks 4000 with the on air light is the best boom arm on the market and none of the rest are even close.

Another video we needed :D

Thanks. Great explanation

I’m using the shure with a blue compass. I’m using the Mogami gold XLR and the mic fits and XLR plugs in without the extension. However, I can’t turn it so I have to turn the stand instead. Will be buying the extension…

great video. thank you!

I've been using the Samson table stand. But I find it a little too low down for my taste. What I like about the one you've showed is that it's adjustable, so I've just purchased that. I'm hesitant to get the Shure extention tube as I notice on a lot of the reviews people are saying that it can get permanently stuck to the mic.

@joconernavarro

2 жыл бұрын

Which table stand mic did you get? Gator or OnStage?

@Aziiio

8 ай бұрын

other than the height of the stand being too short for you, what are your thoughts on the stand in general? And what mic did you use it for? I have a shure mv7 mic and I'm trying to look for a nice quality build, and sturdy stand that will hold the shure mv7 mic nicely.

great video, thanks so much

@kettnercreative

Жыл бұрын

You are welcome!

Thank You!

@kettnercreative

2 жыл бұрын

You're welcome!

Great video!

@kettnercreative

3 жыл бұрын

Thanks!

Nice video man! Does the Gator frameworks work well with Light Microphones? Cause I know the Blue Compass boom arm doesnt' work well with Light microphones, same with the Rode PSA1.

Great video and i have to say i hate my Compass not worth the money and the middle joint started to pop when i move it around so it looks like something is not right there

@kettnercreative

Жыл бұрын

The compass is trash.

Do some reviews of Latch Lake mic stands!

@kettnercreative

9 ай бұрын

If I was mic'ing a drum set, I would. But they don't make any boom arms for home studio use.

I want to see a blue yeti microphone boom arm video please

@kettnercreative

3 жыл бұрын

Good idea. It's going to take us a while to get through our list of microphones, but we'll do our best.

Hi Jordan..... I watch several videos of yours regarding the mixer mg10xu.... I already have the mg16xu but now i need a compact one which is the mg10xu.... Can I purchase it directly from you and yes, I am from Mauritius...... Your videos are awesome.....👍

good job!!!

Where is the link for the extension use on the Rhode ?

update your sm7b mic settings please

@kettnercreative

3 жыл бұрын

What do you mean?

@kettnercreative

3 жыл бұрын

On this video we're just using the Tascam DR10L Lapel mic because of the amount of movement that is needed to accurately describe the boom stands.

@kettnercreative

3 жыл бұрын

Yes

Which table stand are you using in the video? The Sweetwater link (Gator) is different than the Amazon/B&H/Walmart one (OnStage) ... thanks for the helpful video!

@kettnercreative

2 жыл бұрын

We use the cheapest ones we can find, typically OnStage. Just make sure that whatever one you find is height adjustable.

Thanks for the info. I'm trying to figure how to get my SM7b to work with this stand. The diary of a CEO podcast seems to have a cool set up. Any idea what they're using? Thank you.

Nice video review thank you. Can I attach the rode psa1 to a stage mic stand and not a desk?

20:25. I have the Neweer and yeah it's cheap and flimsy. It feels like a 70s desk lamp. It just doesn't feel good with any decent microphone.

What are you using as a table and where did you get the base for the PSA1 that screws right into the table?

Do you need Shure A26X 3inch Extension Tube for Desk Stands?

@kettnercreative

9 ай бұрын

No

Did you cut the cable for the Gator Frameworks at the mic end?

i love your videos!

@kettnercreative

3 жыл бұрын

Thank you!

@manalorp

3 жыл бұрын

Thanks to you, i've bought Yamaha MG10XUF, Focusrite solo, Radial ProAV1, AT2035, AT30x, RodePS1, and all the cables. Now, I'm streaming games on facebook. haha. i'm looking forward on gettimg SM7B with Rodecaster pro. ima try podcasting. One question sir, can i connect my mixer to rodecaster + focusrite solo? would that be a good combo? thank you.

what is that on the desk that is holding the boom arms? on your bottom right? I need something like this so i can adjust the arms better. ty in advance

@kettnercreative

2 жыл бұрын

It's the flange mount that came with the Gator Frameworks 3000. It is such a perfect design, I really like it.

I cannot agree on the "any microphone" with the RODE PSA1. I got myself the Shure Beta 58A at 279g of weight to replace my RODE Procaster and its just too lightweight for the lifting capabilities of the PSA1. But granted, this Video is interested only in the Shure SM7B anyways. And with that microphone, many arms can end up struggling.

I have the Neewer arm, and it's definitely not up to the job of the SM 7B. BUT because I have my arm mounted on a shelf above my monitors, the fact that it can bend 90 degrees on the first joint (where it inserts into the mount) is important. It kind of looks like the Gator and the Blue Compass wouldn't be able to do that. Will the Rode bend to 90 degrees at the lfirst joint?

how do you get the different colour weirs

i bough the gator frame, and to be honest... i really hate it. Not fluid at all, it's good lookin arm but feel cheap at the end because so hard to move around, well... thats what i feel about it.

@kettnercreative

2 жыл бұрын

It's a bit stiff the first week. It does break in over time.

@WhumT

2 жыл бұрын

@@kettnercreative yeah, it’s not to bad after a month or so. But still the fact that the stand pin wiggle in the hole of the stand if the screw is not squeeze in make me cringe everytime i move it around. But hey, its only 170$ haha

But can u like set it with a regular 3 way stand or ??????

@kettnercreative

Жыл бұрын

Yes you can.

My problem is that the desk I have has a beveled edge so I can't clamp any of these arms or my existing arm on to the desk because it just slides off. I'm thinking of just drilling into my desk and then having an extra piece of wood sticking out. I'm just curious if anybody has any alternatives for this.

@zohairshakir9967

Жыл бұрын

I got a small shelving unit to keep next to my desk and attached it there.

@StevenDoesStuff

Жыл бұрын

@@zohairshakir9967 I like that. For now I drilled my desk and attached a flat piece of wood to it

The sound is not clear somehow!!!

First again haha

@indranathmaiti2262

3 жыл бұрын

oh you little.....

@kettnercreative

3 жыл бұрын

Classic.

Really gets in my nerves that the video makers are so afraid to give a choice they prefer and why! Wasted time!