Just a little addition to the straw hack, the little straws that go to each water balloon in those "Bunch of Balloons" packs, is exactly the same size as a WD-40 straw.

@troyyarbrough

Жыл бұрын

I was curious about that. My granddaughter gets those water balloon packs every summer. No I know to save the straws. Thanks for the tip.

Have you considered boat hand towels? Old dish towels/thrived store. with grommets (Plastic).Plastic shower curtain holds, Carabiner… think golf towels. Clip and stay put don’t fly out of the when moving…

To go along with your melting lures back together, use a sharp tip soldering iron to melt them back together. For years I used a crappie jig that wasn't sold in my area. Before they would get totally destroyed I'd melt them back together using a soldering iron and glue them back on the hook. Those things would last forever.

@gofishingwhenyoucan

Жыл бұрын

Yup, I use super glue on my crappie jig

@JacobE-23

Жыл бұрын

Great idea! Thank you for sharing

@Finzaki00

Жыл бұрын

@@gofishingwhenyoucan U Can melt it together with a lighter too

@jppitts

Жыл бұрын

.😅

On your hack number 6, I use a piece of PVC trim board from Lowes, its about 3/4 thick and just cut off how ever much of a length you need and glue it, works really well

You can pick up 3 packs of cutting boards, cheap, at stores like Ross, T.J. Max, Home Goods. But I agree with you, to just get a new one for the kitchen, and recycle the old ones in the shop! I have a small stack I use all the time in my home shop, for cutting and crafting. They make a good cooler dividers / cutting board, on big coolers! Or small outdoor rig tables w/ a cup holder, inserted in them, on a beach rod holder. And you can work with it like wood.

Every spring, gardening stores sell closed cell foam knee pads similar to the mat for about a dollar each. Now I'm not vouching for any similarities in durability but I'll guarantee one of those little squares ain't that cheap.

Dude's a fool. I mean that in a good way. From his little talking lure to his screamin' fast bass boat, he is excellent! One of the most enjoyable personalities on the int err rent. Thanks.

Love the transducer mount hack….It was Awesome!

The WD-40 isn't a good idea because it's a petroleum based oil, which pollutes the waters. I would recommend using Pam butter flavored cooking spray instead.... 😉👍

Love the hacks bud. I used coffee straws and super glue to make my sinker slides and they work great.

@JoeDeLuise

Жыл бұрын

Do you have any problems with braid cutting thru? I use these in the surf and am gonna give it a shot.

@Popareeno

Жыл бұрын

@@JoeDeLuiseno issues at all in lake's and aqueduct but I haven't tried using them in the surf yet. I would recommend to try both coffee straws and spray can straws. I also used sewing thread to wrap around swivel eye & straw to help keep in place.

@JoeDeLuise

Жыл бұрын

@@Popareeno that's a good idea I'm gonna give it a shot. Thanks!

Using those WD-40 straws is pretty 'slick'! No--really!! Great ideas as always!!

@FishinNStuff

Жыл бұрын

Thank you

Sweet tip on the lighter and soft plastic lure mend! I always fish with screw locks to make them last longer or use superglue, but this is AWESOME!

Always happy to get this alert.

@FishinNStuff

Жыл бұрын

Thank you

@JoeDeLuise

Жыл бұрын

Agreed this is probably my favorite alert. Keith could have easily had a one hour spot every Saturday morning on TNN back in the good old days!

I love these hacks everytime they come out, you've saved me a lot of time and money, Thank you!

@FishinNStuff

Жыл бұрын

Thank you for watching them

@philhildebrand5634

Жыл бұрын

@@FishinNStuff looks like someone is posing as you.

@FishinNStuff

Жыл бұрын

@@philhildebrand5634 I'm sorry , I get so tired of blocking those idiots .

I have an industrial laser cutter and when I have time I cut those anti-fatigue mats with it for toolbox liners, gun case liners, safe shelf pads...they're cheap and have a lot of uses! I got these ideas from one of your bucket hack videos!

Fantastic. Mr. Lure was brilliant as usual. Lol

@FishinNStuff

Жыл бұрын

Lol

When you say Awesome, we know they’ll be Awesome! 😊

Hey BILLY it’s me again two things one the WD-40 straws that you bought online do you know we’ve been doing it for a long time up here in Maryland but we go to 7-Eleven and get a coffee strip straws and they’re free and we all knew anything that’s free is the best second of all the mounting board for the transducer that’s a polyethylene board they use them and all grocery stores to cut meat on a lot of times you can go to the grocery store when you’re doing remodels and get as much of that stuff as you possibly can use justThought you’d like to know have a good evening Billy

We use sinker slides up here in the North East for the fishfinder surf rig. Even if braid cuts thru the straw after a day's use, it's still way cheaper then buying them. And it may not, im definitely gimme try this one!

your lure is coming up with some better jokes! That's awesome 🎣

Awesome to start with the Lure

Another great video. Love the hacks you come up with. Also, you and your lure buddy are a great team. An "awesome" bonus for watching your videos and have come to expect seeing him. Good stuff my friend!!

Just received my red straws. Grabbed a hand full of sinkers and gave it a try. Works great. Thanks

More great ideas. Thanks for sharing these ideas with us!

He'll ya. Waited for a new one. Good job brother.

You got to admit it. The talking plug does steal the show on occasion. But both of you do make a good team . A human and a talking crank bait. Now that is awesome.

@FishinNStuff

Жыл бұрын

Lol yeah , you can tell he's a Crankbait cause he's always Cranky 😠 haha

@chrisguice139

Жыл бұрын

@@FishinNStuff Now I know where he gets his genius from. Great minds think alike.

@chrisguice139

Жыл бұрын

Hey man. Looks like you have some hackers. Got a strange message.

Good info as usual. Going to have to pick up some of them straws and my wife a new cutting board.

For the transducer mount, I used 3/4 inch pvc deck board. Works great. Awesome video.

@bikerthom

9 ай бұрын

I did the same thing, deck board and marine glue....awesome LOL

@FishinNStuff

9 ай бұрын

That's a great idea

Great ideas right there . Always enjoy watchin ya hacks . Son saids ol Luwe lure is a hoot.. 👍👍👍👍Keep’em coming

I like the rod holder/nav light idea. I made a nifty rod case using Berkeley rod holders and a cheap China made rifle case. Holds 6 rods and protects them well.

It's a foam pad, fam. You don't need to trim the bottom of the bucket, the pad will adjust itself. Just fip the bucket right side up and throw some weight in it while the glue dries.

When I see you , I pull you up. Then I get a coffee and prepare for some info and a good deal of fun. THANKS from T.C. MICHIGAN!!!!😊

Brilliant idea for mounting my transducer on my sundolfin 12 I got on Saturday 🇨🇮❤️🙂🎣thanks for the video 👍

I don't know how you are still doing hacks. Congrats on somehow keeping this going and still awesome.

@FishinNStuff

Жыл бұрын

Thank you Sir

@BonnieEly

Жыл бұрын

It's really pretty simple he started with a few hacks people came to watch them now he has 200,000+ resources for new and/or better hacks. Definitely genius! I love the first one I am forever having to cut lines because I have no where to keep my poles without them bunched up together and getting tangled up, I will definitely be getting some broom hanger thingies! 😂

Awesome as always! Great job and thank you for what you do!

Great tips, Keith! Simply Awesome!!!

Well Now That's Purty Dang Awesome Right There Y'all lol 😁,, And I See The 🐟 is back, Awesomeness lol 🤣

Man, how could somebody not like these videos ? Huh you ain't crazy are you ?!!! I haven't seen one of your videos that I didn't like. You gotta be runnin outta ideas sooner or later. You should ask your viewers for hack ideas, and voila a new video. You know what I mean ? Bet you'd get some good stuff. And you probably wouldn't have to worry about those esky infringement things. Keep up the good work brother. God bless you and your family and have a blessed day my friend.

Good video Keith! I am using the cutting board hack myself. Works really well. But what I did was to glue up2 pieces of cutting board together with gorilla glue, then mount it when dry. For putting it on the boat I did the typical screw mount but I always put ton of silicone as a backer and put it in the screw holes. Works excellent!

I love the conversation with you and the lure. I be laughing so hard. He's definitely the star of the show lol. Been wondering who voices him 😆

I have been using plastic stirrers, 5000 for 4$, to put in sinkers for a fw years. But I wanted something heavier for making bobbers. These would work. For the sinker slides you need to make then using paperclips, it was your idea to use paperclips in the first place. With the 3M sticky pad they can come loose if they get hot/warm enough. Just an FYI.

@grub321

Жыл бұрын

RV dealers have eterna bond tape, use it around the perimeter and it will not come off.

That lighter welding trick has saved my day more than once.

Great fishing hacks, and Congrats for your 200k subscribers.

cutting board brownie points, cracking me up,

An electric knife works great for cutting foam. Also you could try router bits in a dremel for cutting and making indents in the black foam for storing tools etc..

Definitely going to use some of these hacks! I love your content keep it coming!!!!!!

I really loved the sinker hack. Now that was awesome right there! Tight lines, ~ Manny ~ 🤙🏼

These fishing hack videos are AWESOME

Great hacks. Love the lure comedy !! Thanks for the transducer hack.

Nothing Like innovation to make us better and save some cash!

When using spray glue, spray what you’re gluing and spray what you’re gluing it to. Helps with a better bond

You're a genius! I I love your fish and his jokes!

@jimwalt

Жыл бұрын

Keith, this from you?

Man I don't know where you come up with these great ideas, maybe it's that small talking lure you hang around with lol. Great video Brother. Can't wait for the next build. I don't know why Im not getting notifications on your new videos.

@chriszeitler4613

Жыл бұрын

I'm subbbed and don't get notifications either? Strange...need to know when to watch some awesome new fishing hacks!

If you want a cleaner cut on your foam mat you can cut it with your band saw.

Hacks #2&3 were AWESOME!! #4 was discovering a technique that open poor bait makers use all the time, 👊 and for #5, you can 1) switch to using a Dremel tool to grind away the tabs, or 2) if your cutting with a blade, use heat to soften the plastic where you cut. The foam will reinforce the bottom enough to compensate for minor softening.

Enjoyed this educational tutorial. Lol. As usual you are entertaining and informative. Looking forward to the next show. Til next time...A.M.F.!

Use those straws with styrofoam balls(ebay or amazon) makes great slip bobbers. I run large needle thru styrofoam put a little silicone on straw, run thro hole.

Great video, totally enjoyed, really like those mounts ,can use that hack. Thanks

I really enjoy your hacks. Common sense and inovative.

I collect all the soft plastic lures people carelessly toss away. Then, I use the melting trick to make new ones - some pretty creative looks, too. And they're awesome. Cheap too, and they reuse things trashy people just throw aside around the shore and boatramp.

I did this before I saw this. It definitely works for me. Thanks for all your vids

I rub a screwdriver blade over the ends of all my sliding sinkers to make them smooth! I use a bicycle spoke with a sharpened point to push thru every sinker hole few times to make them smooth inside! Or a thinner wire to do same for sinkers with narrower holes! Electrical wire tubes can also be used for inside sliding sinkers, cut the length, pull wire out of it's tube! 🎣

I also use the WD-40 straws to make my Inurigs now. It's nearly impossible to find the narrow coffee stirrers that everyone used before *and* these are stronger

I'm glad to see Josh getting into it! In more ways than one

This was a really helpful episode! Thank you 🙏 plus the dad jokes were off the “hook”!

That was awesome,as always 👍Thanks 🥇🐟🎣

I like the Home Depot bucket and pole holder idea thanks bud going to do that today

As Always this was a good video. Thank You for another great video and keep em coming.

Once again, another great video. Best, most useful and entertaining channel on KZread.

My cast net buckets stay in place now, on the lake and down the road. Awesome hack there buddy!

Love the hacks. Keep em coming.

You better give that lure a raise

Coffee stir stcks is what I use on my egg stnkers

I do most of the cooking but it is a good reason to get a new cutting board! Lol

As usual these was awesome hacks! Loved this video! Keep it coming!!

Awesome video by my friend Keith

@richhernandez99

Жыл бұрын

Wd works when salmon fishing. Somthing about the scent sometimes triggers a strike.

Man.... That was Awesome! And that talking fishing lure, makes me laugh, every time!

All good stuff , ithink your sidekick likes to bait you a bit 🤣👍

A ton of good content. Plastic sinker inserts would have to be my favorite. I wonder if coffee straws would work. If so u could buy them bill for next to nothing in price

Can you do some hacks on mounting a trolling motor to a inflatable kayak lol

as always, thinking out'a the box. Great stuff! 👍😊🥰🥳

great video. luv the fishing lure jokester.

You can also use a lighter to reconnect torn plastic worms. I have used a lighter to weld 2 different colors of worm together and also sued to make a longer worm when I ran out of 9 inch worms.

@FishinNStuff

Жыл бұрын

That's a great idea making longer worms with it

Ta Day you made my day!

You can also use the straws with thin wire to make screw locks for your soft plastics

As always great entertainment !!

Thanks for showing us these awesome fishing hacks

Great job Keith

All six were Awesome!😮

I like that Lure welding part you can use that if you have to and you ain't got enough of them in the boat

Do you think those mop holders will open up enough to use for a kayak paddle holder?

This is one funny dude. I'll bet he has more than one relative that says, "That boy ain't right". If i had a TV fishing show, I would have this guy doing a segemt for sure.

@FishinNStuff

9 ай бұрын

Heck my own wife tells me I ain't right 🤣🤣 I appreciate lol

Love your ideas!!

Man so sweet thanks.

You could've screwed the nav light holder to the bottom of the compartment lid as well

@FishinNStuff

Жыл бұрын

I couldn't do it . My long , back NAV light is longer than the lid . But sorter than the compartment . I have to put on one side then the other

The sinker slide is awsome but I can’t go back to the ones I can’t take off with out cutting my line the ones I use I can take them on and off and only use them on poles that I switch from heavy bottom fishing to bobber fishing. But watching your videos over the last year are more has helped me as a bank fisherman in so many ways 😊

@FishinNStuff

Жыл бұрын

I know exactly what you mean . Alot of the time I just clip my sinkers on a 3 way so I can change em easy

Your hacks are always welcome 😁👍

Sam’s Club has a 1/2” cutting board for ~$9. Best price I’ve found. It used to be a little bigger than it is now but it’s still a sizeable board.

Always entertaining sir. Creative.

I've watched quite a few of your videos! They are great! You are entertaining! Thank you!!

@FishinNStuff

2 ай бұрын

Thank you and thanks for watching