Concise, I love your videos man. Always on point. To me, the BaByliss and Wahl guards are the best. Everything that BaByliss does is top notch, and as far as guards go, this is where Wahl shines. Great video and thank you!

To answer your question. I have used Andis and Wahl and JRL. My favourite is Wahl premium.

@ConcisetheBarber

2 жыл бұрын

Yea can’t go wrong with them at all

Babyliss knocked it out of the park with this guards. I use them with my JRLs and oh boy, it’s a game changer. 💯

@ConcisetheBarber

2 жыл бұрын

Yea I do like them don’t have a problem with them at all

Having both the wahl premium and the babyliss premium if i need to take a lot of with the .5 I use the wahl and I need just a little of I use the babyliss they compliment each other perfectly

@ConcisetheBarber

2 жыл бұрын

Yea I can agree with that

Good video and input. I have used all the guards in your video and I pick and choose guards depending on my clients hair. I need to get a feel for the hair in order to choose. Thanks for the info 👊🏾💯

@ConcisetheBarber

2 жыл бұрын

Yea I completely understand that .. right now i test them all to see which one works better with which texture

I just got the new Babyliss guards a couple of weeks ago. I have to say, I’m very disappointed with them. They are just way too thick for me. They just don’t feel natural up against the clients heads. And it seems like hair get stuck in between the clipper teeth and the blades when I use them. Just can’t get down with them. I just don’t understand why all of these companies don’t make a zero guard like wahl. I think it’s the only zero guard, that really cuts good, and feeds the hair good. All of the other zeros, really don’t do anything🤷‍♂️🤷‍♂️

@ConcisetheBarber

2 жыл бұрын

I honestly like the babyliss 0 guard… that and the 1 guard

@Mike-hy8cs

2 жыл бұрын

Try the jrl .5 guard. Also the andis 0 and gamma 0 are very identical the way they cut. They cut a little longer than a wahl .5 but if you know how to use them it actually speeds up the transition to the 1 guard.

I’ve never used any type of Andis clippers so don’t have any experience with the purple guards. I’ve been rocking with the wahl premium guards the most of time I’ve been cutting and love them. I had some of the old babyliss guards and they were good but I’m definitely looking forward to getting the new babyliss premium guards

@ConcisetheBarber

2 жыл бұрын

Thanks for your feedback soldier barber life

@Utubedeletescomments

Жыл бұрын

Andis is garbage.

.5 --1.5 wahl guards are nice but it's downhill from there. Andis guards are the best in my opinion

@ConcisetheBarber

2 жыл бұрын

Yea I like Andis guards too

Production is on point brother. Video quality crazy!. Can you turn the music down just a little though?

@ConcisetheBarber

2 жыл бұрын

Thanks dominc for the feedback

@TheSoldierBarberLife

2 жыл бұрын

Agreed, take the music down a little bit just to make it background music so what you’re saying is more prominent

I never knew there as a difference in guard I guess I never paid attention all though I did notice the teeth on the wahl are smaller and thinner which I love I’m currently using the jrl there not bad there just tight you have to press hard and press both ends or they will start rattling

@ConcisetheBarber

2 жыл бұрын

Yea with the babyliss ones and SC guards the rattling isn’t there

Which other brands of clippers are the Andis purple guards compatible without modification?

@ConcisetheBarber

2 ай бұрын

Oster

Tried them all but naturally keep gravitating towards the Wahl premiums

@ConcisetheBarber

Жыл бұрын

I understand

My guy dope vid! Do a follow up with the Andis Premium guards and the Speed O guards (they are Red)

@ConcisetheBarber

2 жыл бұрын

just got eh speed 0 guards.. so video should be coming soon

You was reading my mind thank you

@ConcisetheBarber

2 жыл бұрын

No problem Desmond .. thanks for the support

Double purples hands down, but the Whals are close behind.. just learning about the baybliss and Style Crafts so I need to check them out

@ConcisetheBarber

2 жыл бұрын

Yea man they aren’t that bad at all

@Utubedeletescomments

Жыл бұрын

Magnets fell off my purple guards. Garbage

@jrawblue24

Жыл бұрын

@@Utubedeletescomments that’s unfortunate, but I havnt heard that testimony with any frequency.. usually I ONLY hear great love for the double mags.. 🤷🏽‍♂️ try again?

I like thinner gaurds. Wahl used to make a thinner 1/8 gaurd that opened to a 1 1\2 but got a little bit tighter when closed. They stoppped making it. I ordered both gamma dubs and babyloss premium but im starting to think im gonna be dissapointed with them

@ConcisetheBarber

2 жыл бұрын

Let me know what you think of them when you use them

@babyboy505018

2 жыл бұрын

@@ConcisetheBarber i dont like the babyliss gaurds

Can these clipper guards be attached with wahl detailer li (cordless) ?

@ConcisetheBarber

2 жыл бұрын

These guards only fit the clippers and not the trimmers.. sometimes the trimmers come will small guards for it

Do the Wahl premium Guard fit on the Babyliss FX870 Clipper? Or should I get the Babyliss premium guards instead?

@ConcisetheBarber

11 ай бұрын

Wahl fits on all Babyliss clippers

Just enjoyed your description and comparison of the guards, excellent, your opinion really helped me. I have seen andis double magnet guards have more than 7 teeth, am I right. What advantage does having more teeth on the guard have over less teeth.

@ConcisetheBarber

2 жыл бұрын

just think of a comb.. wider teeth is more hair coming through..but no tension.. more teeth is more detailing work

thanks for the video. good information..😊

@ConcisetheBarber

9 ай бұрын

Glad it was helpful!

Can i use babyliss or whal guards on gamma+ clippers?

@ConcisetheBarber

Жыл бұрын

Yes you can .. only clippers that don’t take wahl guards is andis and oster

@jasonbartolomey

Жыл бұрын

@@ConcisetheBarber Ok thanks!!!

Nice detailed review. If you revise the video go into the differences between single mag vs double mag which one goes better on which blades

@ConcisetheBarber

2 жыл бұрын

Gotcha I will do that thanks 🙏🏾

@KalTheBarber

Жыл бұрын

the single mag would be better for blades that come with flat screws.

I have the andis single magnetig guards with andis uspro li clipper(taper) and I am not satisfied with the result in fades in comparison with wahl guards . The andis guards leaving some lines in your fade.

@ConcisetheBarber

Жыл бұрын

Yea I can’t use the single guards

@dimitriskarolidis3339

Жыл бұрын

@@ConcisetheBarber so the double guards with the masters are better ?

@ConcisetheBarber

Жыл бұрын

@@dimitriskarolidis3339 yes

@dimitriskarolidis3339

Жыл бұрын

@@ConcisetheBarber thnx for the response one last question do you recomemd the andis premium guards for my andis clipper ?because I can't use the double magnetig guards

How can I get the Andis double magnetic ones to fit on a Babyliss pro clipper?

@ConcisetheBarber

Жыл бұрын

same way as this video

@neeshawnblack4438

Жыл бұрын

@@ConcisetheBarberWhat do you mean? I didn’t see anything about how to make them fit on a Babyliss clipper

@ConcisetheBarber

Жыл бұрын

I’m sorry I thought this was a different video here is the link right here kzread.info/dash/bejne/aoWJw5eehpDUprQ.html

Anyone else have issue with babyliss guards hitting the fx clipper when zero gapped and lever all the way closed ? That’s the only thing for me they are not too zero gap friendly lol

@ConcisetheBarber

2 жыл бұрын

I know the fx clipper to have some room to push down with your cutting someone .. maybe that could be it.. me personally I wouldn’t completely zero gap them

@wes_sidee

2 жыл бұрын

@@ConcisetheBarber yeah your right every since I put them back almost to factory but just a couple hairs more gapped and they are perfect, haha your right especially since a lot of guys trying to turn all off there clippers into trimmers 😆 thanks brotha one love ✊🏽

@petertruban7084

Жыл бұрын

I had this problem with classic Babyliss 0,5 guard but it disapeared after i bought the premium 0,5. Build quality od great on them but i would prefer bigger gaps between teeths on these Babyliss premium guards

Which one of these guards are compatible with SC Instinct X Clippers?

@ConcisetheBarber

6 ай бұрын

all of them except the purple ones

@dinof8039

6 ай бұрын

@@ConcisetheBarber even the andis double magnetic ones? 🙏🏾🙏🏾

@ConcisetheBarber

6 ай бұрын

@@dinof8039 I edited my comment

Was your babyliss guards (0.5-1.5) fit really snug with the wahl clippers or jrl. Like they fit but it’s very snug

@ConcisetheBarber

2 жыл бұрын

Umm at first I felt it was very snug but it seems to adjust to them better now

Can babyliss guard fit the oster fast feeds(just seen u answer this in another comment) so what guards can I get for oster fast feeds?

@ConcisetheBarber

Жыл бұрын

You can get andis guards

hey, will Wahl premium fit the Babyliss Fx Pro 8700 without any problems?

@ConcisetheBarber

2 жыл бұрын

Yes that should fit fine

Hey do those pro premium babyliss guards fit on the wahl senior???

@ConcisetheBarber

2 жыл бұрын

I haven’t used my seniors in a while but I can’t see why they wouldn’t fit

Does anyone know where I can get the original andis 0 double mag guard?

@ConcisetheBarber

2 жыл бұрын

Not I.. I would love to grab another

What's better, the pointed ends or rounded ends?

@ConcisetheBarber

Жыл бұрын

i actually like mines to have a little pointed to it

I use Oster Clippers and like the Oster Universal clipper guards. They attach to pretty much any of the Oster clippers.With spring loaded clips they definitely stay in place and by all accounts should fit on the new cordless Fast Feeds and Classic 76’s. I find Oster guards stiff. I think the Whal professional clipper guards to be pretty good too except I don’t use Whal adjustable clippers like the Seniors. The Whal guards are well build and more supple, read comfortable for the customer. The guards for the Beretto line seems to be made of the same material as the Whal Universal guards but of course only fit the Whal German made blades. I find the Purple Andis guards, while supple and flexible, are slightly bigger and therefore dont fit tightly on the Oster clipper blades. Thank you for the Review.

@ConcisetheBarber

2 жыл бұрын

Thank you Rick for watching

Can you use the Andis purple guards on a babyliss Pro Fx boosted+ and StyleCraft Ergo

@ConcisetheBarber

Жыл бұрын

only if you modify them

Does Wahl premium guards fit babyliss pro clippers?

@ConcisetheBarber

2 жыл бұрын

Yes

Will those babyliss pro fit the fast feeds?

@ConcisetheBarber

2 жыл бұрын

They do not fit Andis or fast feed blades

Kinda late but do wahl guards fit on babylissprofx clippers. If not what type of guards fit on them?

@zetaswhyos1344

Жыл бұрын

Besides the premium ones

@ConcisetheBarber

Жыл бұрын

yes they all fit babyliss...only guard that dont fit are andis ones

@zetaswhyos1344

Жыл бұрын

@@ConcisetheBarber ok thx so much🫶

What about the andis premium guards?

@ConcisetheBarber

2 жыл бұрын

They are good but most likely would place them behind the purple double magnetic guards

Why Andis doesn’t want to give us the OG guards?

@ConcisetheBarber

Жыл бұрын

i think its a safety issue but i think someone is coming out with something like it soon

How can we get them

@ConcisetheBarber

Жыл бұрын

Which guards?

They should make full metal guards

@ConcisetheBarber

2 жыл бұрын

Idk about that

So definitely babyliss .5 is best in your opinion?

@ConcisetheBarber

9 ай бұрын

Yes

@Tigerbalm1310

9 ай бұрын

I’m gonna have to fux wit it for awhile. Hanging up the wahl .5 for a bit