From one Bob to another, thanks for this video. It really gets me interested in starting a tamiya semi project.

Just consider moving from MFC to Beier. Your videos are going to be a great help. Thanks Bob. What would we do without you ?

This is very cool to see how easy it is to set up the sound.

I've setup mine a few days ago. I don't like to drive my 1/14 Truck with twin stick controls/radios. I prefer to use the FlySky NB4. The great thing about this unit is the ability to control most of the truck and trailer functions via my android phone. Works like a charm. Once you've set it up. Plus you are not limited to a set of sounds provided by the manufacturer. Not to mention the light functions, cruise control etc. I can not recommend it highly enough.

It was nice to be able to refer to the necessary assembly video. Thank you for sharing a great video.👍👍👍 Have a good day. 💪😊💪

Bob........ I'm excited!! 😁 So, to do a basic setup is nearly a no brainer. Minor tweaks aren't hard. I'm lovin' it!!! AND it's cheaper than the MFC? Bonus! I just blew my budget, getting the Grand Hauler (my FIRST 1/14 Semi!!), Bearings, Servos, 550 Motor, Hobbywing WP1080 ESC (just so I can MOVE her while getting used to Driving), 3:1 Gear Reduction Unit (because I want to run a lower Turn, more powerful Motor), Aluminum Wheels, LESU Tires and Aluminum 5th Wheel Plate, AND the Cletus Snow Trailer Wrap!! (Surprisingly EXPENSIVE) I know you don't need to know that, but at 57 years old, I'm jumping around like a child at the thought of FINALLY having enough money to join this Club!! {I've been in the Hobby since early 1983, but was never able to afford enough for a big lump purchase like this!!} So yeah, I'm going to watch, study and save all these Videos of yours on this amazing system! NOBODY runs these within 300 miles of me - but I don't care. I may even inspire others to dive in! 😉 SO the answer is probably yes... but since it can operate with Lipos, is the Cutoff Voltage SET? Or can I adjust that too? OK my Friend, I know I've asked too much already! Just one more. Instead of the Engine Sounds merely whining up, like a ONE Speed Transmission, is there any way to set up a series of "Shifts", from no more than about 2800rpm, like a real one? Like say.... 6 or 7 shifts before the Kit Transmission shifts to Second?? Too complex? 😲 OK Bob, I'll leave you with that assorted MESS of a Comment! I hope to hear from you on at least SOME of it. Building starts NEXT Week!! 😁😁💃🎉 Carmine ✈🚂🚙

@HobbyconceptsLLC

3 жыл бұрын

Stay tuned, all your questions will be answered and yes you ca set up shifting for as many gears as you want :-)

@CarminesRCTipsandTricks

3 жыл бұрын

@@HobbyconceptsLLC That's AWESOME! Thanks. I'm guessing that the HOW to simulate multiple Shift Sounds will be in the Video Series? Trust me, I will be staying Tuned!!

@CarminesRCTipsandTricks

3 жыл бұрын

@@HobbyconceptsLLC Bob.... I need HELP!!! 😳 I don't know if it's Software, Security OR that I've only been using Windows 10 since YESTERDAY.... I can't get the Sound Teacher to load ANYTHING onto a Truck!! It keeps saying "File is Write Protected and can't be copied" That's even if I try to save a copy on the Drive.... I know I'm doing something WRONG!!

Your explanation even helped me with the basic set up of my USM-RC-2. Thanks! Great vids mate.

Can't wait to see the grand hauler 👍

Thanks for the videos. I was really aprehensensive about the Beier unit, but you make it look easy.

Fantastic video Bob, I’ve missed your videos over the last month, hope your well. I can’t wait for the next in the series, it’s a clever piece of kit. Take care

Wow. More and more exotic stuff every time he posts.

awesome. great breakdown. cant wait for more

I'm using the kenworth W900 on my grand hauler. The SFR-1 is an amazing piece technology. Good video Bob.

@HobbyconceptsLLC

3 жыл бұрын

Thank You! More coming!

good to see ya. great as always.

Thanks for the video, I found your site/videos by accident (thanks KZread suggestions, for once!) and was trying to understand the wiring in the manual before watching your video. As soon as you showed the throttle and steering connections were already wired to the board, the manual suddenly made perfect sense. This was a big help, can't wait to get one and start my next project!

@HobbyconceptsLLC

3 жыл бұрын

Great! Glad it helped.

Great video!

It does have a lot of features compared to the Tamyia unit. Great video Bob.

Hey, I am building a new truck, all new to trucking world. But i was just wondering, do you ship to Norway? I really like your channle, and all the cool videos you make, been watching alot of them, keep up the good work, so just wanted to support the channel and you buy maybe buying some stuff like this ESC/LIGHTS/SOUND unit, it looks and sound real good ;)

Great to see the SFR-1 unit being demonstrated, at a US channel) To be honest I was a bit 'shocked', as I had the impression that to hobbisist in the US there didn't exisit anything else than the Tamiya MFC) Thumbs up.

@HobbyconceptsLLC

3 жыл бұрын

They exist! and more videos to come....

I wish Beier gave the option to fully expand the SFR-1 program to full screen

I'm watching these again... So... What I'm getting is: although I'm using a FSi6 Radio, if I wanted to - I could really use a 3 Channel Trigger Radio!?? Which I may do with an 1850l I'm building soon - for my Grandbabies to run with me. CAN the Beier USM-2 be hooked up this way too? I HOPE you'll be doing a USM RC-2 Series soon. I know you've got some COOL new toys - but I'd really appreciate it. I hope I've shown by now that I'm an actual Customer, and not just one of the many who just talk..... 😉

❤👍

The sounds were recorded from 1:1 sources. If you have a Detroit Diesel, it was recorded from a 1:1 Detroit Diesel. Not a generic. Sounds as with the MFU and other units

I would like to use it for a fire truck.

How about programing the SFR-1 to your radios output signal?

Hi from Australia...thanks heaps for these videos..bought the unit months ago but couldnt find an english,clear explaination. Have 3 trucks i'm building at the moment and have been trying to fit a smoke unit. Found out i could do ity with the sfr 1 but i dont speak german. The Beier SFR-1 Sound Teacher Software USB that you sell on your websit...is it an english version cause the one i got from Beier is also in german.

@verumpraevaleat8177

3 жыл бұрын

all good mate... found the english version on the usb i have....thanks for the vids...worth your weight in gold mate

Hi Bob i would like to tap into your wonderful knowledge of the sfr-1. I have purchased the lesu trailer legs, i am using the beier sfr-1 and using SBUS. I am using the beier sm-ir-16-4 on the trailer, have got the trailer lights working beautifully mind they come straight of the tractor unit with the sfr-1 but i am stumped on the trailer legs could you please advise many thanks

@HobbyconceptsLLC

2 жыл бұрын

You could use one of the servo outputs and hook that to a speed control to work the legs. Or hook a servo to microswitches to work the legs.

Do you also sell the extra output cables (rainbow cables)? My Cascadia Evolution has more than 10 lights

@HobbyconceptsLLC

3 жыл бұрын

Yes I do; hobbyconcepts.net/products/beier-flat-ribbon-cable-10-core?_pos=1&_sid=cae66c5bb&_ss=r

bob, i will order the sfr-1 starter kit for my grand hauler from you in a couple weeks. i know it comes with lights that have resistors. i have some lights that do not. im thinking of also getting the akl-8-w ribbon cab le. does it matter if i run some of your lights thru it that already have a resistor with some that do not. will it harm it at all?

@HobbyconceptsLLC

29 күн бұрын

You can mix them just fine. The only thing that is important is that each LED needs a resistor. If you put one that has a resistor into an AKL-8 you can just jump the resistor slot with apiece of wire.

Question is will this work with the specktrum smart esc/receiver?

@HobbyconceptsLLC

Жыл бұрын

It will work with Spektrum but hard to take full advantage because Spektrum radios do not support SBUS. Other radios are better.

Hi I'm new to the beier sfr-1 followed your instructions on here but I have only got the sd card I can get right the way through it but my laptop keeps telling me no sd card inserted tryed everything what am I doing wrong many thank ...........kevin

@HobbyconceptsLLC

3 жыл бұрын

You need to install the files off the card onto your computer.

So I went over to Beier's site and the cost for everything to get started is roughly about $300 USD not including shipping? Looks like the advantage it has on tamiya is that it's programmable and less bulky, though the price seems the same once shipping is added. I may be wrong. Any insight is appreciated. luv the (your) detailed video.

@Rimrock300

3 жыл бұрын

Basically SFR-1 is the most advanced unit of it's kind avaiable, while Tamiya MFC is more in the other end of the scale, more 'toy grade', and they are quite close in price. MFC is far less 'pang for the bucks'. Major differences is the SFR-1 is much more compact, and the ESC is much more finetuned, in addition to all the programable settings. 2 different worlds.

@HobbyconceptsLLC

3 жыл бұрын

I do sell them here: hobbyconcepts.net/products/beier-sfr-1-starter-package?_pos=2&_sid=4acd7f1e8&_ss=r Once you have one you don't need to purchase items like the USB cable and software so the 2nd one is less. Way more capable unit than the Tamiya MFC but a bit more complicated to set up.

Hi hop you can help me I've lost my micro sd card for my beier sfr1 unit I was wondering can I use any 32gb micro sd card thanks very much

@HobbyconceptsLLC

Жыл бұрын

I use 16GB cards 32GB also work fine. A 32GB card holds 96 hours of sounds.

Hi there I have a Tamiya Peugeot 206 Rally car 1/10 for rc. Does this have a Peugeot sound? Please let me know which versions you have. Thanks.

@HobbyconceptsLLC

Жыл бұрын

It comes with various motor sounds like an AMG Merecedes for example. No Peugeot exactly by remember you can record and sound you like and add it. Find a great sound of the Peugeot screaming through the woods and just add it it!

@njgahol

Жыл бұрын

@@HobbyconceptsLLC ok

Why can't I find the starter kit in the UK?

@HobbyconceptsLLC

Жыл бұрын

I package it up here (in the U.S.)

I just realized you sell the unit (SFR-1) on your site. I'd rather give you the business and order from you. Do you also sell the work tray you're working on also?

@HobbyconceptsLLC

3 жыл бұрын

That is a silicone soldering mat. Super handy. hobbyconcepts.net/products/silicone-soldering-mat?_pos=1&_sid=786862120&_ss=r

Will the Beier software work on a Mac?

@HobbyconceptsLLC

3 жыл бұрын

You need to run a windows emulator.

Hello, who could help me learn how to save my edited program sfr1. I can work with the program but I can't save it when I quit. Have to start over every time installing a project. All feedback is welcome. PS. I'm not very good with the computer.

@HobbyconceptsLLC

Жыл бұрын

Perfect timing. New video on that coming to You Tube in a couple of days in my new Beier Masterclass series. If you can't wait you can see it on Patreon right now. patreon.com/Hobbyconcepts