Thank you Drew! Yesterday I updated our board from 3.12 to 4.09 right after (soapbox) our service. I referenced this video to make sure I backed up every section. It updated perfectly! I had a moment of terror when everything was blank... then I loaded a scene, whew!

Don't do it on Sunday Morning LOL. Love you Drew, you're the best

Thank you very much.

Hi Drew. If you are using an S32 stagebox along with the Behringer x32 console, do you need to do something with the stagebox too when updating the firmware?

Hey Drew. Are we going to see you do an in-depth review on the Mixing Station app with the X32 ? Coz we are all using it. but a bit tricky understanding the Custom layouts designing... ??

On the Welcome to new firmware page after the update, it says "Updating the Firmware can cause data loss. Make sure to restore your Console Backup made prior to the update." Does this mean we should go ahead and restore to the backup it made during the update process, or only do that if something is wrong? All my scenes appear in tact after the update so I don't want to risk messing it up with an unnecessary restore, but also just would like to know best practice if we should do the restore anyway. Thanks!

Hi Drew. I have a challenge with my ether con cable issue of not reading on x32 producer.sometimes it used to do it and went on turning off and on the stage box and it reads ,there times it fails yet when i test the ether con cable ,test fine .What could be the problem and the solution?

Yo, there's no link in the description to back up the x32 before updating the firmware lol, can you add it

Hi Drew . Please inspect this latest firmware with Waves card . I have received noise coming from the ch. Unfortunately old 4.02 version is only stable for Waves . If you have availability to impact on BEHRINGER/MIDAS please let them know .

I wish you can tell me how to update the xlive card the stock one cause last time when i update the board the card didnt. Thank you and keep up the good work.

I need help. I have the edit app on pc and today we went to load a scene but our digital mixer on pc where we load was black. How can it be fixed??

After upgrading my beringer x32 compact firmware from 3 to v4 it reset everything like I just go a new one but then I was unable to restore all my back up files 😢 what can I do?

Hi Drew. I am having trouble with my Mixing Station app connecting to the board. How do I make sure I’m on the right IP address?

Hello all... I'm reaching out because I have a problem. One of my cats thought that my X32 Compact fader "knobs" were a toy. I have 3 missing. Is there a place to buy replacement fader knobs? Please help !

I have inherited the sound job at our church. Learning as I go. We have 2 Behringer X32 boards. I am preparing to update both boards. Should I have 2 usb thumb drives and save the content for each board to a separate usb drive? Stan

What is the name of file you are dragging over to USB drive

I have updated to 4.09 and after that my X-USB driver doesn't work on my windows pc. What should I do? Please, help.

hi Drew. Why are my channels 1 & 2 share their GAIN even they are not linked. I mean, if I turn the GAIN for channel 1, whatever value that is, then I check the channel 2, it's just the same. but they are not linked.

Hi drew, how to update stage box s16. Tq

Drew.....after updating firmware I can't multitrack record anymore to Studio One on a MacBook Air iOS Ventura. Wondering if there is something simple I am missing?? Been recording for years before updating, but recently switched from a PC windows 10 to the MacBook. Routing and all templates were copied over. Tried a new session and 1 to 1 routing just to test and still no dice.

@drraymond57

Жыл бұрын

Some more context.....I CAN run a virtual soundcheck with all the same routing. So audio goes in, but no audio comes out with regard to the card.

I was just attempting to update our x32 producer yesterday and was having issues. The drive is formatted Fat32 but the x32 does not recognize it. I've tried both ways to update and nothing. The light for the USB doesn't even light up. The drive is recognized fine in any computer I put it into. It's it possible the USB on the board is broken? I don't think this thing had ever been updated.

@Ohweyaskitchen

Жыл бұрын

Same issue of my x32 icannot update

@mitch1495

Жыл бұрын

You have to format the usb thumb drive MBR fat32, not GUID. We updated from V4.02 and the mixer would not recognize the drive formatted with GUID fat32

Hey Drew I have a question. Is there anyway to contact behringer to ask/suggest a future firmware update? What I would REALLY love to see (if it's possible) a track volume control but it would be done thru one of the turn knobs below the lcd screen. This would really be handy for when we play tracks for our singers at church via a thumb drive. All the other options are already there such as play, stop, rewind, fast forward, record........ It would be nice to have one knob to slowly fade out the music if the track runs a little too long (which sometimes happens)

@captainkirk3000

Жыл бұрын

Hey you know there is a volume slider for this near the aux volume sliders lol, also you could assign the volume to one of the assign knobs on the right

@ILoveWeapons

Жыл бұрын

@@captainkirk3000 I know about the slider on the aux but can u please go into a bit more detail about assigning it to a knob please?

@captainkirk3000

Жыл бұрын

@@ILoveWeapons Which x32 do you have?

@ILoveWeapons

Жыл бұрын

@@captainkirk3000 the x32 compact

@captainkirk3000

Жыл бұрын

@@ILoveWeapons Oh nevermind, you don't have those knobs on the compact version

How to update stage Box?

Hi drew.I downgraded my x32 firmware to 2.05 now can't update need some help

What is new on thuis update?

@dannymedina8916

Жыл бұрын

I was wondering the same thing.....

I Want New Firmware 4.06-8 please.

Ever since updating my bosses won’t save my changes

All video want to in hindi pls

can you update the frimware with the edit x32 app? becaus the usb in my x32 port dont work any more.

@agenxphyte

4 ай бұрын

Did you find a solution? I have the same problem.

@Kenneth_Munch

4 ай бұрын

No unfortunately 🙄