So glad you are back at it. Appreciate your insights.

Great advice my friend. Thank you for ALL of your time and help. Be safe )

Thank you Drew, well explained.

Thanks as always Drew

Great video brother as always...Joe from Staten Island

Thanks Drew for all the helpful videos over recent years with the X32 console. A great well to draw from for info. I'd love to see you cover a scenario where an X32 Rack is added at the side stage rack underneath the Midas DL32 digital snake, into a system that already utilizes the X32 console back at FOH. We currently use all 16 busses on the console already, 10 for 5 Stereo IEMs, 2 for mono wedges, 2 for Livestream audio, and the last 4 for reverbs. We needed to add more busses via the X32 Rack for additional stereo IEMs so we bought the X32 Rack and haven't been able to figure out how to set it up. Our house system is run in stereo as well.

Thank you so much Drew

Thanks Drew

This guy is gold

Thank you! I am just learning the Midas32 and your relatively short videos on specific topics are very helpful! We are using the firmware update 4.06. I would like a focused discussion on fader flip. As I understand it there are three conditions here. What do the buss faders control when fader flip is off, when fader flip is on and an input channel is selected, and when fader flip is on and a bus channel is selected?

it's nice to see you again drew...my request is can you have a tutorial video of parallel compression via DANTE to LIVE PROFESSOR 2...kepp it up..thanks again..

Awesome!!! 🙌🏻🙏🏻🔥🔥🔥👏🏻👏🏻👏🏻🇧🇷

Brother Drew, could you make a video teaching how to mix a kick and a snare, for example? Mainly showing Equalizer and Effects? Thank you in advance and God bless you! 🇺🇸🇧🇷

My question with USB drive is , which is the best ones to use I’ve used 3.0 3.1 and my recording skips (live recording)

Not really a question but a video on virtual sound checks PC and Mac would be super helpful and maybe what free software would work best for the X32 or bought software. Been trying to set this up to help train volunteers at my church. Thanks, Chris

@StageKLS

2 жыл бұрын

Drew has an older video on this, that works the same on the newest firmware, as for software, reaper is a program which u can download and use for free as long as u want u just have to wait 5 sec after startup in order for u to use it, here is the vid: kzread.info/dash/bejne/qGqVk7ivf7TVhsY.html Hope it helps

I have a question about support. Your advice about not attempting updates just prior to a show or service are well-taken. If things do go awry, where can you turn for support? My church has a Behringer X32 Compact that was donated and set-up long before I got involved. History is pretty vague at this point. If one needs set-up or settings recovery help, can you contact Behringer direct? These are great videos. Thank you so much!

So ,can you do the same thing for a computer that's on the network via X32 Edit?

Shot in the dark that I'll get an answer on an older video, but how do you back everything up on firmware 3.x?

When do you do updates of console firm ware and this time how does the console behave

want to ask, my x32 mixer wants to update the firmware, but the usb flasdisk slot does not show the access led lit at all, has it ever happened? I hope someone can answer, thankyou

hi drew i have received very old x32 and it only on 1.15 firmware. i've tried to update to the latest firmware but it failed..

I would add a 3rd soapbox, USB drives can fail, i would backup the data on at least two drives!

My xLive card stopped working after I updated! Any suggestions as to why?

Thanks Drew what version is the x32 at now

Just curious, is this method of doing a full backup the same thing as what happens when the firmware update process asks you to backup the console?

I keep losing my mains. Going thru my s16 I have them on 15 and 16 on the s16. which I have 2 . Then I am dumb founded on how to get them back working. This has caused me hour of trouble shooting. What am I doing wrong?

What do you think about the new update 4.09?

Hello Sir, Question: if my board is several firmware updates behind, should I update the board with the next version in sequence and so on, or update straight to V4?

@schattenheim

2 жыл бұрын

Hi, I think you got your answer, but if not… my experience is - do a backup - and go straight to the last update. It could be that it looks and feels different but your shows should run fine…. But dont do it at Friday, Saturday or Sunday 😊

This is SENGOOBA EXPEDITO a student in the Watoto worship academy. My question is that how can I update my X32 behringer and then I stop the faders from automatic movements with me pulling them up or down

Hi Drew, thanks for the great video. I have a question please: I am running 3.1.1 firmware and I don't have an AES50 tab on my library page. So do I need to back up the AES50 settings from somewhere else? If so, how? Thank you, John

@michaelshannon3589

9 ай бұрын

Hi there. I have 3.1.1 version and am about to update to 4.xx (latest). I don't have an AES50 tab either. I've backed up everything as explained in the video. I'm going to need to pull the trigger and do the update in the next day or so. Have you done your FW update yet, and if so, how did it go? Did you need to restore anything? Thanks.

@ixtapavangogh

9 ай бұрын

@@michaelshannon3589 hi, I jumped in anyway and it all went according to the documentation. Smooth sailing, thank God.

How can i send effect on monitor? I follow you from tanzania.

Hello brother Drew. How can update

Hello drew my x32 cannot read my usb I am using firm 3.06 I try different usb but still cannot read please help I want to update to latest firmware

@biliksuaraID

10 ай бұрын

@oliviasoldevilla3261 Hello, we have the same problem, but until now I haven't gotten an answer.

Really hoped for an new update... But his video is just one year late... I guess everyone has updated his console already 🙂

What if I got church from Monday to Friday and of course Sunday.

Drew, i have sent a few emails.... just wondering if you had time to check the mail.

I love your work, but you have never answered any of my questions.