Hey Jason thanks for making this. This is exactly what I needed. I’m going to set this up during the week and see how it goes. Appreciate you digging deeper on this one for me. All the best

@jshi600

4 жыл бұрын

No problem, this is how I had it set up before, but I just didn’t go into detail. Great I could be a help!

in this setup can you also use the inputs on the x32 to send to the wing?

we need to know use 2 wing console for one foh and one monitor console for 2 pieces s32 stagebox.

Can you do this with two S16 to x32 rack and the wing?

@jshi600

2 жыл бұрын

Yessir

Can i use just a personal computer as my monitor mixer at side of the stage

@jshi600

3 жыл бұрын

You can use a tablet or a phone not a computer yet.

Can i hook up two video monitors to the wing, at foh... one on the right and one on the left so I can watch two pages at 1 time

@jshi600

3 жыл бұрын

No sir not at this time

super

Awesome info! How do you set up or connect main left and right?

@jshi600

4 жыл бұрын

Hello!!! From these instructions it would be channels 7&8 of your 1st s16.

@emanuelmorales4529

4 жыл бұрын

In the future are you planning to make a video using a scene from the X-32 on the Wing?

@jshi600

4 жыл бұрын

Emanuel Morales yes I can if that is what you would like to see

@emanuelmorales4529

4 жыл бұрын

Jason Robinson yes please! Right now I’m in the middle of the process of connecting the Wing with the X-32 without using a digital snake I’m crossing fingers everything works out.

@jshi600

4 жыл бұрын

Emanuel Morales hopefully it worked out but if it didn’t check out my older video kzread.info/dash/bejne/mHZn2MOncpfRl5M.html

DUDE

So you X32 is your monitor console and the Wing is FOH...... and you're coming out of the B port of the X32 (Not S16) into the A port if the Wing (FOH), correct?

@schotimeaudio

Жыл бұрын

If I had an S32 or DL32, could I come off of the B port of the stage box into the A port of my FOH console... would the routing still work the same since its all one stage box?

@schotimeaudio

Жыл бұрын

Also, instead of using the block routing (1-8, 9-16, etc..) for the outputs, I could essentially use the user routing to dictate specific routing, correct?

@jshi600

Жыл бұрын

Correct