Going through every control on the Behringer TD-3-MO, their Devilfish copy.
Жүктеу.....
Пікірлер: 86
@mCKENIC2 жыл бұрын
This is IMMENSELY helpful thank you for going over it with examples. Not had enough time with my MO to really get in to it, yet. Thanks mate!
@gwEmbassy
2 жыл бұрын
You’re welcome!
@poofygoof2 жыл бұрын
The MO addresses my main concerns about the TD-3 and puts it the same class as the 777. When evaluating a friend's TD-3 I found myself wanting to twist the knobs a bit more than they would actually go, but on the MO that doesn't seem to be a concern. I heard a lot of familiar sounds in this video that I've either dialed into my own 777 or heard on the original devilfish demo recordings, and I'm glad that another generation will have easier access to this sound palette.
@gwEmbassy
2 жыл бұрын
Yes, it’s great the design will carry on. It clearly has its own unique sound, especially the accent!
@korut2 жыл бұрын
I love how you make your acid in the kitchen
@gwEmbassy
2 жыл бұрын
It’s the best place to make it!
@mrrafsk
2 ай бұрын
Bathtub better for volume - hardfloor and eye-q ❤
@bradylasserre9320 Жыл бұрын
Gwem, I love your videos immensely. Thanks for doing what you do.
@gwEmbassy
Жыл бұрын
Glad you like them!
@RetroBassed8 ай бұрын
Excellent breakdown of the knobs & switches on this bad boy! Just ordered the newer black version of the MO. Thanks for a great vid! 👍 👏
@gwEmbassy
8 ай бұрын
pleased you enjoyed!!
@ASH-ou4cg Жыл бұрын
Thanks Gwen. I have the MO, but haven't really got into it yet. This is a good reference to look back on, for when I do.
@gwEmbassy
Жыл бұрын
Hope it’ll be useful
@adub3032 жыл бұрын
Nice breakdown and full tour of the MO, thanks for laying it all out. I've been using mine for about a year now and still am scratching the surface of what it can do sonically (though, admittedly, I haven't properly read through the manual- just sort of flailing wildly in the dark 😂). Thanks for sharing! (And big thanks to Robin Whittle for the O.G. Devilfish 🙂)
@gwEmbassy
2 жыл бұрын
Flailing around in the dark works well! :) Shoutout to Robin Whittle indeed!
@acidporn2 жыл бұрын
Great video as always
@gwEmbassy
2 жыл бұрын
🙏🙏
@LlewynDaviesTheThird2 жыл бұрын
Great walkthrough. Thanks
@gwEmbassy
2 жыл бұрын
Pleased you found it useful!
@droidsonacid Жыл бұрын
Nice video Gwem! Thanks for sharing!
@gwEmbassy
Жыл бұрын
You’re welcome Droids!
@ThinkerThunker3 ай бұрын
Great walk-through, thanks!
@gwEmbassy
3 ай бұрын
Glad it was helpful!
@LocaliLLocano10 ай бұрын
Nice video mate. I’m currently sequencing the TD-3 with my cirklon. Now I want this bad boy
@gwEmbassy
10 ай бұрын
very cool sequencer!!
@nexuzeb79 Жыл бұрын
Thank you Sir! Best explanation I've seen on youtube so far and I've watched alot! Someone once asked if it was possible to get the same sound on the MO as on the OG TD 3...
@gwEmbassy
Жыл бұрын
Thanks for the compliment! As you saw, you can’t really get the MO to sound just like an original 303. But I think that’s the point!
@Steveness1002 жыл бұрын
Brilliant! Thanks so much for this - subbed 👍
@gwEmbassy
2 жыл бұрын
Thanks Jazzy!
@chrisschwaab Жыл бұрын
Great Video! Very helpful. Now I know how to treat my td3 mo right. Cause the knobs confused me a lot in the beginning.
@gwEmbassy
Жыл бұрын
Pleased you found it helpful, it was helpful for me too :)
@hampsonpaul3531Ай бұрын
State of the art kitchen themed studio ..Love it man ..Great video .. I have a modded TD3 and have been on the fence with MO ...not anymore
@gwEmbassy
Ай бұрын
pleased you found that useful!! :) :)
@bentropy Жыл бұрын
Thanks for this walkthrough. May I suggest you make a vid demo’ing some of the possibilities the MO’s patchbay opens up? Basically no videos on KZread show and explain what you can do as far as routing CV and the other ins/outs. Thanks again, new subscriber (in a bid to motivate you, like you asked 😉)
@gwEmbassy
Жыл бұрын
Hey Ben, thanks for the sub! To be honest I’ve only done one experiment with the patch bay so far, although that was a success. This is a good video idea and I’ve made a note, might well do something :)
@VincentsVideoVisions Жыл бұрын
great video as usual. wanna hear the td-3 MO through the dod caracosa :)
@gwEmbassy
Жыл бұрын
That’s a good idea for a video, I’ll make a note!
@ph911 Жыл бұрын
Very useful! CAn you explain how working outs? filter, cv, acc gate etc. (higher part of front panel)
@gwEmbassy
Жыл бұрын
that would be a good idea idea
@zuur303 Жыл бұрын
I wish there was an overhead shot of the knob settings, the sound is great. I find the MO pretty difficult to set to "still 303 but better" I have the regular TD-3 and an original TB-303, but the MO has become more of a sideshow in my studio, which I didn't expect when it first arrived.
@gwEmbassy
Жыл бұрын
Maybe this video could help : kzread.info/dash/bejne/dquO1M6Lh5qqeJc.html
@djmixamatoesis9956 Жыл бұрын
Excellent demo! - Can I ask what you are using to get the killer reverb ?
@gwEmbassy
Жыл бұрын
Yes, the reverb is killer! I am using the Boss RRV-10 for it. I found it accidentally and it will now stay with me to the grave.
@ricardojmestre
Жыл бұрын
Love the reverb❤
@Old299dfk Жыл бұрын
haha, there's no beat or nothing - and i still found myself bobbing my head along. I guess that's the power of it, credit to Behringer, they knocked it out of the park with this.
@gwEmbassy
Жыл бұрын
Yes, they did, I agree!
@superzeronoelvalencia13612 ай бұрын
Hi there ! I really want to know what mixer you are using in this video . I'm looking into a new mixer to jam w/ my 09 and 2 303's and Im having a bit of trouble deciding atm .
@gwEmbassy
2 ай бұрын
it’s a Boss BX-8
@NobodyNoWhereElse2 жыл бұрын
👍
@gwEmbassy
2 жыл бұрын
😎
@Doublebeat589 Жыл бұрын
What is the mixer you use? Looks pretty)
@gwEmbassy
Жыл бұрын
It’s a Boss BX-8
@jacknjill30002 ай бұрын
Nice demo! Is acid house coming back? Sorry and I haven’t been keeping up with house music for about 22 years.
@jacknjill3000
2 ай бұрын
I love the term “Attack” bc that how it used to feel on the dance floor and dancing to these magnificent sounds and beats.
@jacknjill3000
2 ай бұрын
Reminds me of the old acid house song by Humanoids and I think called Stalker.
@gwEmbassy
2 ай бұрын
I think acid house is one of those styles that’s always around.
@gwEmbassy
2 ай бұрын
I think you are thinking of Humanoid by Stakker :)
@PToonsNetwork2 жыл бұрын
i remember you! we used to chat a lot a bit ago on youtube!
@gwEmbassy
2 жыл бұрын
Welcome to the channel then I guess :)
@Decoy303 Жыл бұрын
Looking for an answer to the red accent button and why it doesn't stay engaged like the sub oscillator button and why you have to hold it down manually to keep it engaged and if this button could be modified like the sub oscillator button. For me this v was a poor production choice
@gwEmbassy
Жыл бұрын
It’s meant for buildups in your track as you jam. I like that it’s a momentary switch as you can just engage it quickly when you need it.
@elwhiskey Жыл бұрын
HI, but between this and volca nubass - which do you like best? thanks
@gwEmbassy
Жыл бұрын
The Nubass
@totalSLACK6 ай бұрын
sick mixer. is that a Vespa or Tascam?
@gwEmbassy
6 ай бұрын
it’s a Boss mixer :)
@totalSLACK
6 ай бұрын
@@gwEmbassy it looks like an old Vespa 4track I have. it's beautiful!
@Nahmannahman420 Жыл бұрын
Is the MO version is able to do the classic 303 sound with the distortion? I saw its only have Overdrive but even on full overdrive it doesnt sound like a distortion
@gwEmbassy
Жыл бұрын
The overdrive is a bit different in the MO. To get that classic 303 distortion you need to use a pedal or drive a mixing desk.
@Nahmannahman420
Жыл бұрын
@@gwEmbassy Thanks man, any recommended pedal or plug-in for that classic distortion?
@Nahmannahman420
Жыл бұрын
@@gwEmbassy ?
@gwEmbassy
Жыл бұрын
Try a ProCo Rat or a Boss OS-2
@mareikemacinnes7764 Жыл бұрын
Moin Gwem, is there a button combination to turn off the flashing LEDs in the case? I've had the Td3 MO since yesterday and the flickering around is already getting on my nerves! Greetings from Germany
@gwEmbassy
Жыл бұрын
Not that I know of.. I too find them very annoying!
@mareikemacinnes7764
Жыл бұрын
@@gwEmbassy Your video was very helpful to understand all the functions of the Devilfish Mod on the Td3 MO. thanks for that Have you ever had the normal Td3 in your hand and tested it? I have a question regarding the Td3 pots. The ones on my Td3 are very stiff (positive:) as they apparently are on the original Tb303. The ones on my Td3 MO, on the other hand, are rather smooth-running like the ones on my Pro 1. How do you feel about the Td3 pots compared to your Tb303?
@gwEmbassy
Жыл бұрын
I tried a normal TD-3 in a shop. I think the OG TB-303 has stiffer pots than the MO
@mareikemacinnes7764
Жыл бұрын
@@gwEmbassy I assumed so. Nevertheless, it also has advantages because I think that you can adjust the last nuances in the sound with the smooth-running potentiometers by turning them minimally.
@Paidonthedaily Жыл бұрын
What mixer do you use?
@gwEmbassy
Жыл бұрын
That is a Boss BX800
@Paidonthedaily
Жыл бұрын
@@gwEmbassy its looks very nice ✌️
@gwEmbassy
Жыл бұрын
I agree 😎
@UNPAVEDTV Жыл бұрын
Thank you but next time a camera looking over head at 303 would be WAY more helpful than sideview far off :)
@gwEmbassy
Жыл бұрын
I am accepting donations for an overhead camera rig ;)
@zeibeats Жыл бұрын
u could at least turn around the camera
@gwEmbassy
Жыл бұрын
Not really practical considering the layout of my kitchen :(
@bjh36612 ай бұрын
This is very informative but too much resonance a lot of the time. My ears hurt.
Пікірлер: 86
This is IMMENSELY helpful thank you for going over it with examples. Not had enough time with my MO to really get in to it, yet. Thanks mate!
@gwEmbassy
2 жыл бұрын
You’re welcome!
The MO addresses my main concerns about the TD-3 and puts it the same class as the 777. When evaluating a friend's TD-3 I found myself wanting to twist the knobs a bit more than they would actually go, but on the MO that doesn't seem to be a concern. I heard a lot of familiar sounds in this video that I've either dialed into my own 777 or heard on the original devilfish demo recordings, and I'm glad that another generation will have easier access to this sound palette.
@gwEmbassy
2 жыл бұрын
Yes, it’s great the design will carry on. It clearly has its own unique sound, especially the accent!
I love how you make your acid in the kitchen
@gwEmbassy
2 жыл бұрын
It’s the best place to make it!
@mrrafsk
2 ай бұрын
Bathtub better for volume - hardfloor and eye-q ❤
Gwem, I love your videos immensely. Thanks for doing what you do.
@gwEmbassy
Жыл бұрын
Glad you like them!
Excellent breakdown of the knobs & switches on this bad boy! Just ordered the newer black version of the MO. Thanks for a great vid! 👍 👏
@gwEmbassy
8 ай бұрын
pleased you enjoyed!!
Thanks Gwen. I have the MO, but haven't really got into it yet. This is a good reference to look back on, for when I do.
@gwEmbassy
Жыл бұрын
Hope it’ll be useful
Nice breakdown and full tour of the MO, thanks for laying it all out. I've been using mine for about a year now and still am scratching the surface of what it can do sonically (though, admittedly, I haven't properly read through the manual- just sort of flailing wildly in the dark 😂). Thanks for sharing! (And big thanks to Robin Whittle for the O.G. Devilfish 🙂)
@gwEmbassy
2 жыл бұрын
Flailing around in the dark works well! :) Shoutout to Robin Whittle indeed!
Great video as always
@gwEmbassy
2 жыл бұрын
🙏🙏
Great walkthrough. Thanks
@gwEmbassy
2 жыл бұрын
Pleased you found it useful!
Nice video Gwem! Thanks for sharing!
@gwEmbassy
Жыл бұрын
You’re welcome Droids!
Great walk-through, thanks!
@gwEmbassy
3 ай бұрын
Glad it was helpful!
Nice video mate. I’m currently sequencing the TD-3 with my cirklon. Now I want this bad boy
@gwEmbassy
10 ай бұрын
very cool sequencer!!
Thank you Sir! Best explanation I've seen on youtube so far and I've watched alot! Someone once asked if it was possible to get the same sound on the MO as on the OG TD 3...
@gwEmbassy
Жыл бұрын
Thanks for the compliment! As you saw, you can’t really get the MO to sound just like an original 303. But I think that’s the point!
Brilliant! Thanks so much for this - subbed 👍
@gwEmbassy
2 жыл бұрын
Thanks Jazzy!
Great Video! Very helpful. Now I know how to treat my td3 mo right. Cause the knobs confused me a lot in the beginning.
@gwEmbassy
Жыл бұрын
Pleased you found it helpful, it was helpful for me too :)
State of the art kitchen themed studio ..Love it man ..Great video .. I have a modded TD3 and have been on the fence with MO ...not anymore
@gwEmbassy
Ай бұрын
pleased you found that useful!! :) :)
Thanks for this walkthrough. May I suggest you make a vid demo’ing some of the possibilities the MO’s patchbay opens up? Basically no videos on KZread show and explain what you can do as far as routing CV and the other ins/outs. Thanks again, new subscriber (in a bid to motivate you, like you asked 😉)
@gwEmbassy
Жыл бұрын
Hey Ben, thanks for the sub! To be honest I’ve only done one experiment with the patch bay so far, although that was a success. This is a good video idea and I’ve made a note, might well do something :)
great video as usual. wanna hear the td-3 MO through the dod caracosa :)
@gwEmbassy
Жыл бұрын
That’s a good idea for a video, I’ll make a note!
Very useful! CAn you explain how working outs? filter, cv, acc gate etc. (higher part of front panel)
@gwEmbassy
Жыл бұрын
that would be a good idea idea
I wish there was an overhead shot of the knob settings, the sound is great. I find the MO pretty difficult to set to "still 303 but better" I have the regular TD-3 and an original TB-303, but the MO has become more of a sideshow in my studio, which I didn't expect when it first arrived.
@gwEmbassy
Жыл бұрын
Maybe this video could help : kzread.info/dash/bejne/dquO1M6Lh5qqeJc.html
Excellent demo! - Can I ask what you are using to get the killer reverb ?
@gwEmbassy
Жыл бұрын
Yes, the reverb is killer! I am using the Boss RRV-10 for it. I found it accidentally and it will now stay with me to the grave.
@ricardojmestre
Жыл бұрын
Love the reverb❤
haha, there's no beat or nothing - and i still found myself bobbing my head along. I guess that's the power of it, credit to Behringer, they knocked it out of the park with this.
@gwEmbassy
Жыл бұрын
Yes, they did, I agree!
Hi there ! I really want to know what mixer you are using in this video . I'm looking into a new mixer to jam w/ my 09 and 2 303's and Im having a bit of trouble deciding atm .
@gwEmbassy
2 ай бұрын
it’s a Boss BX-8
👍
@gwEmbassy
2 жыл бұрын
😎
What is the mixer you use? Looks pretty)
@gwEmbassy
Жыл бұрын
It’s a Boss BX-8
Nice demo! Is acid house coming back? Sorry and I haven’t been keeping up with house music for about 22 years.
@jacknjill3000
2 ай бұрын
I love the term “Attack” bc that how it used to feel on the dance floor and dancing to these magnificent sounds and beats.
@jacknjill3000
2 ай бұрын
Reminds me of the old acid house song by Humanoids and I think called Stalker.
@gwEmbassy
2 ай бұрын
I think acid house is one of those styles that’s always around.
@gwEmbassy
2 ай бұрын
I think you are thinking of Humanoid by Stakker :)
i remember you! we used to chat a lot a bit ago on youtube!
@gwEmbassy
2 жыл бұрын
Welcome to the channel then I guess :)
Looking for an answer to the red accent button and why it doesn't stay engaged like the sub oscillator button and why you have to hold it down manually to keep it engaged and if this button could be modified like the sub oscillator button. For me this v was a poor production choice
@gwEmbassy
Жыл бұрын
It’s meant for buildups in your track as you jam. I like that it’s a momentary switch as you can just engage it quickly when you need it.
HI, but between this and volca nubass - which do you like best? thanks
@gwEmbassy
Жыл бұрын
The Nubass
sick mixer. is that a Vespa or Tascam?
@gwEmbassy
6 ай бұрын
it’s a Boss mixer :)
@totalSLACK
6 ай бұрын
@@gwEmbassy it looks like an old Vespa 4track I have. it's beautiful!
Is the MO version is able to do the classic 303 sound with the distortion? I saw its only have Overdrive but even on full overdrive it doesnt sound like a distortion
@gwEmbassy
Жыл бұрын
The overdrive is a bit different in the MO. To get that classic 303 distortion you need to use a pedal or drive a mixing desk.
@Nahmannahman420
Жыл бұрын
@@gwEmbassy Thanks man, any recommended pedal or plug-in for that classic distortion?
@Nahmannahman420
Жыл бұрын
@@gwEmbassy ?
@gwEmbassy
Жыл бұрын
Try a ProCo Rat or a Boss OS-2
Moin Gwem, is there a button combination to turn off the flashing LEDs in the case? I've had the Td3 MO since yesterday and the flickering around is already getting on my nerves! Greetings from Germany
@gwEmbassy
Жыл бұрын
Not that I know of.. I too find them very annoying!
@mareikemacinnes7764
Жыл бұрын
@@gwEmbassy Your video was very helpful to understand all the functions of the Devilfish Mod on the Td3 MO. thanks for that Have you ever had the normal Td3 in your hand and tested it? I have a question regarding the Td3 pots. The ones on my Td3 are very stiff (positive:) as they apparently are on the original Tb303. The ones on my Td3 MO, on the other hand, are rather smooth-running like the ones on my Pro 1. How do you feel about the Td3 pots compared to your Tb303?
@gwEmbassy
Жыл бұрын
I tried a normal TD-3 in a shop. I think the OG TB-303 has stiffer pots than the MO
@mareikemacinnes7764
Жыл бұрын
@@gwEmbassy I assumed so. Nevertheless, it also has advantages because I think that you can adjust the last nuances in the sound with the smooth-running potentiometers by turning them minimally.
What mixer do you use?
@gwEmbassy
Жыл бұрын
That is a Boss BX800
@Paidonthedaily
Жыл бұрын
@@gwEmbassy its looks very nice ✌️
@gwEmbassy
Жыл бұрын
I agree 😎
Thank you but next time a camera looking over head at 303 would be WAY more helpful than sideview far off :)
@gwEmbassy
Жыл бұрын
I am accepting donations for an overhead camera rig ;)
u could at least turn around the camera
@gwEmbassy
Жыл бұрын
Not really practical considering the layout of my kitchen :(
This is very informative but too much resonance a lot of the time. My ears hurt.
@gwEmbassy
Ай бұрын
she is peaky!