No video
Behringer Europower PMP3000 dyno, real life audio output power test
Behringer Europower PMP 3000 real life tests, no dummy loads and lab perfect setup. Real loudspeakers on.
Finally the mixer and the power amplifiers turns to be real powerful.
Пікірлер: 22
just bought pmh3000 today for 50$. I don't have speakon cables yet so I can't comment on its amplifier but everything else like vocal muting! working through the monitor out.
@viocaia
2 жыл бұрын
It's a really nice mixer, easy to install and carry around.
Thank you
@viocaia
5 ай бұрын
Thank you too
Subscribed : VERY INFORMATIVE thank you Sir... would you perhaps do a demo that has the KICK compressed and with effects. I like the techo.
@viocaia
3 жыл бұрын
Hey! I can't have a power test based on Kick short impulses with or without compression , this test needs a sustained sound.
did you bridge the channels for maximum advertised output through only one channel?
@viocaia
2 жыл бұрын
Never. like stereo
Hi,by any chance do you have the diagram for this console?I'm having problems and I need the diagram,I'd appreciate if you could help me,thanks so much
@viocaia
Жыл бұрын
I only have PMH3000, but you can download here clubdediagramas.com/archivo/audio-equipos-de-musica-amplificadores-reproductores-etc-a7/behringer-m1214/behringer-pmp3000rar-f121396.html
Is it now a clean signal 2 X 446 Watts ?
@viocaia
Жыл бұрын
Yep, a single frequency per test
@TRILERish
Жыл бұрын
@@viocaia There are two outputs for speakers. That means 100% 2 x 446 watts or ?
@viocaia
Жыл бұрын
@@TRILERish right, there are two power amplifiers, separate outputs. Also, it can tied in bridge for a mono double power output.
@TRILERish
Жыл бұрын
@@viocaia tanks for info :)
what speaker watts and ohms do recommend for this mixer?
@viocaia
Жыл бұрын
As you can see from testing results, the power is around 450W in 4 ohms..so you'll need at least a 500W loudspeaker with 4 ohms or 300W in 8 ohms. Like a rule, higher speaker power never hurts! You can use 2000W boxes...as long as you are in the impedance limits , min4 ohms everything will be ok! But if you intent to use smaller...well, that's depending of your common sense, use the volume carefully, you can feel when a loudspeaker is overdrived. Finally: min 500W for 4 ohms, at least 300W for 8 ohms and 1000W min at 8 ohms in bridge mode.
So 416w per channel or total
@viocaia
Жыл бұрын
Please see the video at 11:15 , you got all the resuslts.
Hi I've got the same mixer it only costs me £20 a bargain
@viocaia
3 жыл бұрын
Go for it! It's amazing good sound..for the money if course!
@viocaia
3 жыл бұрын
If you sell it let me know! :-)