Welding galvanized metal is a fast way to experience metal fever. It is not a joke. I first experienced it welding on conduit in an overhead crane cab. After that experience, I always ground the area to be welded.

@shanecaldwell8995

Жыл бұрын

The old school dudes tell me to drink milk before a full day of welding galvanized. I’m not sure if it works but I’ve never gotten galv poisoning myself and I’ve had my head all up in the smoke at times. Been working with guys who have gotten it and it’s 100% not a joke.

@grumblycurmudgeon

10 ай бұрын

Milk doesn't do shit. Old wives tale. Simply _strip the galv before welding!_ Muriatic Acid dissolves the zinc a treat. So will white vinegar (though you want the stronger crap - 20+% - or you'll be there all night. 1. Cut pipe/conduit/strut to length. 2. Soak portions of pipe to be joined in a PLASTIC OR GLASS container with acid of choice (don't go breathing THESE fumes either, goes without saying). 3. Wait until the fizzing dies down (couple minutes). 4. Pour acid into disposal container. 5. Dunk part formerly bathed in acid into solution of baking soda and water (this neutralizes any remaining acid). 6. Weld. And soon. This strips the part down to BASE STEEL, and it'll start rusting if you wait too long (>30 min or so) You'll get a MUCH better join (no slagged zinc in the joint), no heavy metal burn off, and, every time you're successful (rumor has it, anyway) a shop teacher gets his wings. Dunno about that last one there, but worth a shot. Self-flagellate with safety bleating: goggles, gloves, respirator, blah blah blah. It's acid. You go breathing it, blinking it, or bathing in it, we can prolly do without you in the gene pool.

ชัดเจนขอบคุณครับ

ഉഷ അനിൽ എന്റെ നോട്ടം സൂപ്പർ ആണ് ആണ് 😊

الخلل في زيادة ونقصان الامبير لاتخدع الناس فأنك وضعت الزر على ٦٠ والمعدن رقيق وفي التجربة الثانية لم تضهر انك خففتها الى ٤٠ او ٣٠

Grinding off the galvanisation would have made a stronger and easier area to weld

@Morbian13

Жыл бұрын

Also it won't make you sick as hell welding either when the galvanized coating is ground off.

Im confused the difference, is ut just a tighter weld more touches basically.

Nice job ma man💥

Chia sẻ video hay đó bạn

Nice❤❤❤

That was ok for a beginner.

Thats the real process but it depends how thick the metal

Terima kasi pak infonya sangat baik

@ironweldingid

5 ай бұрын

Terima kasih kembali

Nice

Start in the bend move quickly to the end of the thin metal. If youre not fast enough clean slag after every tack. If youre fast enough the slag will stay floating to the top. Now if youre not sure it will hold atleast you have more material on the steel that you can go over with a better more solid pass. Otherwise good for this thickness of steel using stick

Для тонкого металла придумали полуавтомат. Но если нужно заварить ручной сваркой, меняйте полярность и делайте ток минимальный. И варите прихватками с паузой. Каждый раз отбивая шлак.

@Dachnik_Slavyan

Жыл бұрын

Ткнул-отбил шлак, ткнул-отбил и так пока не заваришь?

@user-bx5ze4jw5p

Жыл бұрын

@@Dachnik_Slavyan да не надо каждый раз. как на видео - просто паузы по длиньше и направляй электрод больше в толстую часть металла(ребро). пока шлак "красный" он не мешает формировтася шву

@Aytist-Down

Жыл бұрын

нах менять полярность, просто паузы подольше и нормально

@user-sn4dm8mu4w

Жыл бұрын

@@Aytist-Down Потому что температура дуги на плюсе 3000 градусов, а на минусе всего 2000 . Я смотрю тут одни специалисты...

@Aytist-Down

Жыл бұрын

@@user-sn4dm8mu4w на прямой полярности варится в основном если металл, который нужно варить , толстый. А так все варят на обратной и нормально

조금 아쉬운 부분은 용접하고자하는 모재의 두께와 용접봉의 굵기에 대한 설명이 없어 아쉽다

@shailendraramsing6289

Ай бұрын

Yes

Good

let's get this guy some proper gloves

Soldadura intermitente🔥

Опасно ли для глаз смотреть это видео без защитной маски сварщика

@salkynkainar3069

16 күн бұрын

Конечно😮

Desse jeito vai demorar 5 anos para entregar uma encomenda kkkk

so basically very fast touches?

Nyc

❤️❤️❤️❤️❤️❤️

❤❤❤❤❤

첫번째보면 좀더 오려 지지고 두번째는 겁나 빨리 때네 ㅋㅋ 차이가 그거지 첫번째에도 빨리 떼면 충분힟가능해요

um, what? nothing was explained

I can only say Why. Just a point to rust?

Кто тебе позволил раскрывать "секретные техники сварки оцинкованного тонкого металла"??? За тобой уже выехали!!!!

Hizo lo mismo anterior, solo bajó el Amoeraje.

❤❤❤

А искры в такие перчатки не залетают?

сколько диаметр электрода?

@lakai02

3 ай бұрын

Looks like 3/32

오른손 잡이자나 당연히 2번째 용접이 잘나옴. 용접봉 방향 보세요

God Jobs

👍

Excellent work

Masih salah mas'e 😂, las yg baik dan kuat itu besi yg mau di las di pesokkan dulu 1/2mm atau 1mm, baru di las, isi lasnya masuk penuh, di grenda rata lalu ttup dempul, kalau sekedar las rata trs di grenda rata, hasil lasnya dikit, di injak aja sudah patah, 😊

@reymundmacabenta1

Жыл бұрын

1 mm rod is not available in some countries. Here in the Philippines usually use 2mm to 2.5 mm because that's the only available in local hardware. We can't fully weld a thin metal with this but we can do a spot welding just for gates and fences. For structures like stairs of course we use thicker metals so that we can fully weld it

@silvercat3243

11 ай бұрын

Bisa mohon diterangkan cara mem pesokkan besi 0,5mm?

@rajademit5250

11 ай бұрын

@@silvercat3243 tinggal titik pojok", lalu tengah di palu dipesokan,trs las full, di jamin kuat, kalau sekedar las rata trs digerindra dijamin bakalan patah.

@silvercat3243

11 ай бұрын

@@rajademit5250 kalau cara lasnya aakah sama dengan yg di video ini atau punya cara lebih baik mas karena saya jadi ragu karena melihat komen anda ttg cara las di video ini. Kalau cara sambung besi hollow saya rasa betul apabila perlu di pesok dulu.

@rajademit5250

11 ай бұрын

@@silvercat3243 saya udah 12 tahun terjun di bidang pengelasan, pengalaman saya dulu waktu ngelas buat kanopi, pengelasannya seperti di video, ketika di pemasangan kanopi, otomatis kita naik rangka kanopi untuk masang atap spandek, setelah terkena beban manusia sama atap ketika di atas waktu pemasangan, saya lihat rangka ternyata patah bekas pengelasan, Karena kita dulu kalau las itu rata, trs di Gerindra supaya rata permukaannya, kalau di Gerindra akhirnya kan tipis hasil pengelasnya, beda sama yg dipesokan 1mm, setelah pesok, baru dilas penuh, meskipun digerindra rata, hasil lasnya di dalam banyak gK tipis,

Вначале поставил 60 а варит так, как будто 110.

А сколько градусов угол?

@victor_pilotov

10 ай бұрын

Приблизительно 45.

Поменял силу тока, а варит также точечно.

Oh wie geheim dafür brauchst du delta sicherheits Einstufung

What Brand And Model Of Electrode Are You Using ??? Amén.

@silvercat3243

11 ай бұрын

Mostly 6013, 2mm diameter nikko steel brand.

@-mejor-que-nostradamus-6152

11 ай бұрын

@@silvercat3243 My E6013 From Lincoln Will Not Weld Galvanized Steel, Not 40, 60, 80, 100 Gets Burned Part Only,,,,Thank You Friend.

@silvercat3243

11 ай бұрын

@@-mejor-que-nostradamus-6152 that's too bad, we have some issues regarding a certain galvanized metal as well but usually taken care by simply grinding the material surface a bit before welding. More specifically we are commonly use the AWS A5.1 6013 rod with High Titania covering. Hopefully the data could become handy if you should find other electrode brand.

@-mejor-que-nostradamus-6152

11 ай бұрын

@@silvercat3243 God Bless You....Thank You So Much.

Не могу понять для чего варить этот профиль? Закрепил на 2 клопа и оцинковка цела и соединение не слабее. Понты для приезжих.

@victor_pilotov

10 ай бұрын

Это профильная труба, только зачищенная до блеска для съемки.

바삭. 바삭. 바삭.만 기억햐.

Ролик - хороший. Звук - плохой. Зачем хороший ролик портить плохим звуком ?

Sama saja ini caranya cuma kecepatan tangan

0 penetration, good job

Another fake welder trying to act like they know what they're doing.

Не верны оба варианта так как в ГОСТ 5264 данный тип шва отсутствует следовательно показанный вами шов не отвечает требованиям Федерального закона 384 "Технический регламент о безопасности зданий и сооружений" и на этом точка.

@chygynok

Жыл бұрын

Какие ,блять, ГОСТы на профтрубу и калитки?😂

Bro that's not how you are supposed to weld xd

@James-po5ed

Жыл бұрын

Whenever someone doesn't talk and wags their finger during the video, then I know they don't know what they're doing.

Wtf you didn’t even grind the gal back 😂 get some dif rods go down to 60a try again 🎉

Hnd nman luto

No explanation at all.

전류를 줄이면 되지 뭐하러 저렇게 해 ㅋㅋ

😢

⁸

chinese welders lol

Jajajajjajajajajaj aprende t primero novato

This is terrible for a number of reasons. Best tip is to not do everything that is done in this video.

@nandu1770

5 ай бұрын

Please tell why this terrible. Im trying to learn stick welding.

@khosrowjalali7898

5 ай бұрын

Hi Tommy, as per the other poster, please share with us why? I'm also curious to know.

@xNecromancerxxx

4 ай бұрын

Yeah, tell me why this is terrible? It looked pretty good to me…

@robsonsantosOSO

2 ай бұрын

O que você diz não faz sentido e parece apenas que você é um frustrado tentando diminuir o trabalho de alguém competente. Prefiro me afastar de você.

@miprop

27 күн бұрын

If u don't have a proof it means u just a jerk🥴

Варит как полуавтоматом))))

Тащите мешок, я зайцев наловил.

Блин! Я тонкий метал полуавтоматом прожигаю даже на минимум 0,8 проволокой. А дуговой 2 мм норм получается , вот прикол

@user-xy3jl6wn6v

20 күн бұрын

просто маленький опыт сварки.