Beginner's Guide To Hand Pump, HPA Tanks and PCP Airguns, How it Works
Ойын-сауық
Introductory guide to walk you through from the beginner's basics of handpump, HPA tanks, and PCP Airguns. How to fill the tanks, fill the guns and pump your own air, ditch the Co2 and have fun running your own hard worked air. This is one of the best thing to do if you are into shooting air guns! Nothing is better than filling up the tanks yourself while doing exercises!
~-~~-~~~-~~-~
~-~~-~~~-~~-~
===SCROLL DOWN FOR COUPONS!===
Best led Lights & Flashlights sales - goo.gl/MExAwK
Best selling phones collection - goo.gl/ZJk25A
【Flash Sale】: goo.gl/LoVXdy
【Today's top coupons & offers】: goo.gl/Z65mTF
GEARBEST SPECIAL CATEGORY COUPON - Valid when product not on sales
LED Lights and Flashlights
GB17LED - 12% off - goo.gl/qSHKRd
MOBILE PHONES
GBMBP - 8% off - goo.gl/pnmsQA
Camera and Consumer Electronics
GBCE - 13% off - goo.gl/PHV3jd
Tablet PC
GBTPC - 13% off - goo.gl/jkn9wq
RC Toys
RC18OFF - 18% off - goo.gl/W5LfD1
=== FOLLOW US ===
TWITTER: / chiinnature
GOOGLE: www.google.com/+chiinnature
PINTREST: www.pinterest.ca/makjosi/
FLASHLIGHT BLOG: bestflashlightschoices.blogsp...
Support us on Patreon!
/ chiinnature
Shop at amazon.com - goo.gl/0TUPwd
Shop at amazon.ca - goo.gl/Bx54te
Shop at Gearbest - goo.gl/gVrBWA
Shop at Aliexpress - tidd.ly/d78b299c
Пікірлер: 146
Mak Jo See, Not sure of spelling for your name but I want to give you a BIG THANKS for this video on hand pumping. I am 65 years old with chronic low back pain. Using your method of locking the elbows and bending the knees to let my body weight finish the pump stroke is a blessing for me and most folks trying to do this. I weigh 180 pounds and can go over 3000 psi no problem You saved me a lot of pain so I can shoot my airguns more.
@travperk
Жыл бұрын
some pain pills from behind the counter really help brother.! visit your Primary Care Physician to get started. ♡
The air's capacity to hold water increases with temperature. That's to say that warm air can hold more moisture than cold air. This is why when you go outdoors on a cold day and breathe out, the moisture from your breath immediately condenses in front of you and drops away to the ground. Relative humidity is a measure of how much water is in the air as a percentage of what it could hold. Therefore the best environment for using your pump is the combination of cool air and low relative humidity.
Thank you for this video man, I decided on getting the umarex gauntlet .25 cal and got a handpump for it. As I have never used a PCP gun or pump before you really helped me out yet AGAIN! Thank you for all the things you have taught me so far :)
maaan , I love your wall decoration , awsome !
thank you for all your knowledge. in air guns,have learn a lot form you. love your Channel.
Thanks man !! You have such great videos and information. You always get right to the point.
MJ thank you so much for all your informative videos. They've been incredibly helpful. Thank you
Thanks for all the good info.
watched the whole thing! great video brother!. im up here in Northern , California. just figuring all this stuff out. i learned a lot from this vid. You helped boost me along in the journey. Sinceriously appreciated.
thank you for the great upload !!! very,very, helpful
Good video. Just ordered a huben 350 bar pump and waiting for it to arrive. Appreciate the good information you provided. Subscribed.
Thank you very much! I just got my first hpa tank, a conversion kit for my Sig Sauer MCX. I think I will go for the hand pump now.I got a paintball park 5 km from me I hope they can help me fill it up the first time.
Very informative! Thanks!
Thanks!! very helpful information 👍
Great info, thank you
Nice chanel to know more about the HPA tanks, thanks.
@Chiinnature
7 жыл бұрын
they are great investments!
this video is very good for education, thank you so much
Mak Jo See is absolutely RIGHT . I know from bad experience more than once , since I am stubborn and don't like to change. Pay the money to get the chambers / bigger filters to GET THAT WATER / OIL out if the air before it goes into your AG !
Very helpful thanks.
Great video thank you
Great video
Thank you.
Your vids are great 👍🏽🙌🏽
nice vid man!
I think your videos are great I watch them often Breathe as you pump, as in don't hold your breath you'll last long enough for your next video :)
great video thanks alot :)
thanks
Nice video I subscribed
For anyone still watching this, pumping is hard work! I'm young and weigh 60kg but am very fit and fairly strong. By the time the pump is at 180 bar (my gun goes up to 232bar) I have to jump and use my body weight too to help push down the pump every time. Considering each pump if you don't stop is roughly equal to 1bar, that's 50 times I have to jump and use all my strength to get that pump down. And that's after having pumped maybe 100 times before that all of which are still fairly tough. The higher you get the harder it gets and it can be pretty damn exhausting! At 200 bar, I can sit on the handle of the pump and it will go down half way and stop there. So to push it down to the bottom another 32 times takes some serious effort. After 4 years I've gotten a lot more efficient at it and a lot stronger because of it but I'm finally giving up and buying a tank. That pump would have killed me one day. Oh and if you do need a break half way through pumping, that pressure will drop back down a little requiring even more pumps. For $300 dollars a decent tank is honestly a worth while investment for sure!
@Chiinnature
8 жыл бұрын
or save up more - buy the compressor like me. lol! It's a joy and totally a game changing device, no more pumping, pumping is for when zombie days come.. hahaha! Survival purpose!
@ryanburroughs5226
7 жыл бұрын
Otto Mercer
@Bonjour-World
7 жыл бұрын
I suspect it is a lot easier for someone who is closer to 15 stones.
@willybee3056
7 жыл бұрын
The size of the pressure vessel is the determining factor. I get 5 shots from 230 bars down to 200 bars. After the hose is pressurized it only takes 15 stokes to fill from 200 bar to 230 bar. So for those pressures, it only takes 3 strokes per shot.
@willybee3056
7 жыл бұрын
Oops the concept is correct ,,, 11 mins ,, but you can not use the tank down to zero... You can only use the tank down to the equal pressure of the system. That means the if the tank only has 150 bar, the rifles vessel can only go to 150 bar. So that means that if you want to fill your rifle to 200 bar, you must have more than 200 bar in the tank. So if you will never go below 200 bar in the tank, unless for some reason you dump it. So that means if you fill the tank to 300 bar, you start at 200 bar ,, not zero, except for the first time..... I found a Boyles Law calculator on the web. It will show the volume of air needed to get to a certain pressure in a certain volume tank. I hope this helps....
2021 still helpfull
Some good advice. :)
@Chiinnature
10 жыл бұрын
:)
good vid
Thanks just bought a hand pump. What a work out, lol. Question, is it normal to have air sound at the top of the handle?
I like this man he is actually the fsther of my sons also when SHTF i will now have a hand pump to reload my pcp airguns wich is super important because i like to survive ok? Ok!
Great vids and good info, I just ordered the Air Venturi G6 pump. I was wondering if you knew how many pumps it would take to fill my Hatsan AT-44 from 2000psi back to 3000psi?
Ur a good weird. Info to the best. 😁
Hello Mark, i want suggest you to make a reviw about the new breaker ball, made in pastic mix whit iron powder, with 6.4 gr each one.
I started at zero.. oops.. seems to be working..Thanks for the video..
Thanks, I'm buying a pcp from friend, and hes giving me a pump, time to learn.
@Chiinnature
2 жыл бұрын
all you need is a handpump for one or few rifles/pistols,. compressor is a big pain in the ass when they need to be serviced or get screwed and leaks... I had one and hated that lifestyle alot. I spend time repairing that monster more than using it for my joy. No way that is a good thing to do. Hand pump is great, you can get exercises and build some muscles too.
Thank you for this video. What is the name of the small black tank? Where can I get it from?
would you mind posting the brand of that package of adapters.
how many shots can you get out of a 13 ci tank like the one you pumped up? I plan to convert to hpa and would like to get an idea of how many shots each size tank shoots. Thanks
What's up Mak? Great videos man. I'm looking into buying a tank for my two Marauders. What do you think about the Air Venturi Carbon Fiber Air Tank, 4500 PSI, 90 Cu? Do you recommend any other around the same price range over this?
How often if at all do you have to replace/clean the desiccant?
I have a regular 20oz air tank. do I get a quick connect for it, or do I need an adapter?
hi,i have the Benjamin discovery and the Benjamin pump and do i need a adapter to fill ,at this time its not filling any advise,thanks
A dumb question, may be it was answered but didn't noticed: a car manual pump will go? And are there adaptors for those pump to air rifles directly (not into temproary air tanks)?
@adriandumitrascu4292
5 жыл бұрын
car manual pump have like 10bar, this one has like 300bar.
Worthwhile for a 10ci/3000psi tank? First fill I may get it filled somewhere, but I'd like a hand pump for emergency situations (zombies... ya know?).
hello, I have a Hatsan Flash and a Hatsan pump. the pump after 10 movements is blocked. It creates an overpressure and no longer loads the Flash cylinder. Where's the problem?
where did you buy all adaptor for hand pump ?
thanks for making this video, I also got the moisture filter for this and it came with the silica and a bag of white rock, Do you happen to know what the rocks are for? and is the filter system under pressure? I see cracks on the plastic of my unit, thanks
@Chiinnature
9 жыл бұрын
ironmendm9 No there is no pressure in the unit for sure, it's just that air goes in from the unit and to the pump and the "white rocks" are the desiccant beads, they are for replacement of the stuff inside the unit.
Can you pump marauder with it. Up to 2800 psi ?
What's brand of hand pump is it your using ?
how is the Benjamin trail NP pistol?
if I use a hand pump with filter to prevent moisture? will regular cleaning and care help prevent the rust? can I get to those parts to clean?
@Chiinnature
8 жыл бұрын
+WooglesOutdoors You can clean anything, but the thing is - do you want to open it up and clean? LOL That is another question. I have opened up tanks and stuff myself but I don't want to do it unless I need to do it. Sometimes it is all about the seals and if they are leaking or something. When shit happens, usually there are many signs before the big shit happen - such as leaks. If your tank is not giving you good performance, leaking air, or the stuff comes out of the hose is kinda wet, you know you need to start checking what's wrong. Handpump is never good enough for moisture filtering, but it helps if you put a dehumidifier around where you are pumping, it helps!
Great video man, what's the name of that pump?
@Chiinnature
8 жыл бұрын
+Manga v2 That is a benjamin pump, you can search for that on amazon !
where do you buy the filter for that and how $$?
How long does it take to fill 200bars pcp rifle
Can you use an Argon tank from a welding shop to fill your PCP guns?
@Chiinnature
7 жыл бұрын
nope
Where can i get those adapters ???
背景不错
Thanks for your comments. I will give you an update if I can find a reason why Argon tanks can or can't be used. From my thinking high pressure gas should be able to be used as a fuel regardless if it is Argon, compressed air, Helium or Nitrogen. But I'm not certain if there are any adverse effects of these gases that I'm not aware of.
how often U have to pump to fill a 500 cc tank ? I mean from 2000 to 4000 psi ?!!
I have a question do you know if a Hill mk 4 pump would last me for pumping up one AIRFORCEAIRGUN that I plan to get any info helpful thank you
@Chiinnature
8 жыл бұрын
+ljw2896 yes you can use the pump for sure, but keep in mind that pumping is indeed labor intensive. Not that easy, especially air force tanks are not small like the air tube on air arms, so more pumping is required
你是本冰的好友吗?今天看到你的视频 突然想起本冰的一篇文章里放过一张照片说她有个朋友在家设道场摆步枪,与你非常契合
9:30 Now you have me worried I was planning to do a hpa setup on a crosman dpms r1, umarex steel storm and m92a1. I'm guessing the m92a1 will be okay because of the single c02 canister is replaced with hpa dummy c02. Butttttttt The other 2 guns use 2 co2 canisters. If I use the co2 dummy and a empty co2. Will the empty co2 explode???
@adolfojmz2200
2 жыл бұрын
You can get a tank and a regulator , I have a pcp tank with a regulator that has an outlet pressure of 850 psi , don’t go over that, CO2 doesn’t go above that but air is more stable than co2
Can i hand pump a empty pcp tank?
Nice guide and nice tips, ive heard you can use those paintball pistols, rifles (sorry i dont know how are they called) with HPA instead of CO2 is it true?
@Chiinnature
10 жыл бұрын
of course, I use HPA for all my paintball guns!
@averyblack4826
9 жыл бұрын
Yea that's what most of them use the newer one anyway
I was looking for a hand-pump compressed air bottle to use as an alternative to dust-off electronics cleaner. Would this be adaptable to that purpose?
@Chiinnature
8 жыл бұрын
+Myanameis Beestingz it might be a bit overkill but yes it can do it. I use it for this purpose too. LOL You can buy a duster head for these hpa tanks and use a small tank for the job. a 13ci tank with that head is very useful, this is the head - www.rap4.com/rap4canada/gear-duster-a-1283.html
@stopthephilosophicalzombie9017
8 жыл бұрын
Chiinnature Thanks!
can you use air from a mechanic body shop ? ..is it the same air as to fill a pcp rifle? I'm a beginner,so I'm thinking about getting the Benjamin marauder .25 cal...
@Chiinnature
8 жыл бұрын
+Gerald Williams nope, you need a comparessor for HPA/PCP, which cost more than those you use in shop. The pressure goes up to 4500psi and above, unlike the shop machine that only goes to 120 psi and about. Totally not the same thing. You can also get SCBA tanks and have them filled by someone and then transfer air from the big tank to the guns/smaller tanks
@bigearl8687
8 жыл бұрын
Ok, I'm glad to know that, I saw this pcp hand pump,according to reviews it's one of the best out there..it's called the hill pump..do you have information on that specific pump..
I enjoy pumping slowly too!!!!!!!! 3==
@jahkingallah4454
7 жыл бұрын
boo bye hahahahahhahahahahahah yall crazy
@kaiju6396
4 жыл бұрын
Coom
I am new to pcp what gun would you recommend???
@Chiinnature
7 жыл бұрын
airarm s410, superb classics
i didnt know u did air gun? lol been subrscibed for a while lol!
@Chiinnature
9 жыл бұрын
Stephen Russell oh man, I have a LOT of airguns and shit! :)
@stephenrussell3839
9 жыл бұрын
Chiinnature btw what pump is yours ukka that extra filter looks good
@stephenrussell3839
9 жыл бұрын
Stephen Russell btw just sold my s400f for a s410tdr!
Nice video...hahahaha...i almost have a heart attack pumping with my arms and then bending my back...thank for show me the right way...i have 120 250cc tank in my pcp gun...i fill it...30 min resting ...a change of t-shirt...shoting 30 time...and then repeat the "near heart attack exercise" ...LMFAO...
@Chiinnature
8 жыл бұрын
+Arturo Gonzalez Thomas hahahahahahahah! Well I got my 75cf tank and the compressor, there goes the true way of pcp! Filling up so many guns and tanks, pumping is really a nightmare, but it is a good tool to have in the house, just in case one day your compressor and tank is dead, you have something to use!
CO2 burst disk pop at just over 1500 psi. So he is right. Don’t use CO2 tanks which are modified and expect it to hold this kind of pressure.
where can you buy the dry pack for the benjamin handpump?
@Chiinnature
10 жыл бұрын
bobby naushad Amazon, and then if your crap in the device ran out, just buy some desicant and shove it in and it is the SAME thing. www.amazon.com/Sun-Optics-USA-Desiccant-Pressure/dp/B0094O3GZE/ref=sr_1_1?ie=UTF8&qid=1407687944&sr=8-1&keywords=benjamin+pump+desiccant
@bobbynaushad996
10 жыл бұрын
Chiinnature thanks for the feedback
Can you use them for paint ball guns
@Chiinnature
3 жыл бұрын
yes
@sheluv.isaac1684
3 жыл бұрын
Chiinnature I bought this paint ball guns it’s called vl triton 2 and I was wondering if it worked with a tippman 48ci tank
Why wouldn't a Argon welding tank work? It has over 4000psi that could be regulated down to what ever pressure needed on the PCP gun needed. I don't understand why it wouldn't work.
@Chiinnature
7 жыл бұрын
From what I know, "Argon" is heavier than air, and so the performance of your guns will decrease even at the same pressure, and also, Argon tanks might be fitted with different hoses and fittings that is not rated for the filling pressure of HPA need, or maybe you would need to for sure check and make sure to avoid any injuries. I am no professional in chemistry but for sure it is best to be safe than sorry with high pressure stuff. There are some airgun forums around that got people who knows more about the tank stuff, maybe you can take your question there for a more professional reply if you insist on using argon tanks.
I hav so many same things had them we got same taste alvay i lok for items i found you.. Cheers good taste and you got chees. Do mkor nunjitso and alll not jusz colect.. where do you get money so many expansive stuf.. even iligal for most got few lihe drozd hpa nunchak mastering and boo karate and airsoft ... Shoting... ANime WOW
Affordable “pcp” pistol "?
@TheEringobragh
5 жыл бұрын
Vinny C Crossman Silhoutte PCP is a good option.
想請問您住哪邊? 亞洲地區很難能玩到這些槍種 閣下真是幸福XDD
@Chiinnature
9 жыл бұрын
1394wong Toronto :)
my tank goes to 1000 psi then my pump go to 2000 then my tank is at 1100
Do you have to have the filter
@Chiinnature
8 жыл бұрын
+Thesasha Friberg You don't but it is better to have if you want less moisture for your tank and guns - moisture can build up inside the tanks and guns, then they will cause rust, leaks and many problems.
@theofriberg1687
8 жыл бұрын
ok thanks
is this for paintball
@Chiinnature
8 жыл бұрын
+Carlos Orozco you can use it for paintball guns and tanks too, but of course you cannot use tehe 90ci tank directly since it is outputting 2800psi .. it's for filling our smaller tanks
I couldn't get to 200 bar, too heavy. With this system is way easier and I can keep firing all day.
@Chiinnature
8 жыл бұрын
+Artur Lindner You weight less than 180lb? Maybe that's why. Maybe try to get a big SCBA tank and just transfer air from the big tank to your guns, MUCH easier and no need to pump! :)
@kenjif89
8 жыл бұрын
Chiinnature Have you ever used a FX 4 Stage Pump? I only weigh 145, but am not sure if I can even fill it to 190bar (tried a briends Benjamin pump, and i couldn't fill it- feet off the ground haha). I just bought a used AA S200FT, but have no air source. I'd really prefer a FX pump over CF tanks- I'll even wear a weight vest if that'll work.
@Chiinnature
8 жыл бұрын
kenjif89 all the pumps are very similar. I have used the FX pump, very similar in terms of effort. The best thing to do is to get yourself some more muscles by doing weight lifting. Nothing beats muscles. LOL
you should hook that pump up to a bicycle or something. You would be able to pump twice as fast and not even break a sweat, you're legs are a lot stronger and have more endurance than your arms.
@Chiinnature
10 жыл бұрын
Huh? bicycle??? confused.. how?! Also, not really, using JUST the legs vs using the arms AND your body weight, which one is better? obviously eh?
@dangerous1portal
10 жыл бұрын
Chiinnature similar to in this video /watch?v=S9V0LBxbZRA, not sure if it would be practical but definitely an interesting idea :)
@Chiinnature
10 жыл бұрын
Kimbo Slice don't think it will work. water pump are no more than 100psi, but these things are going up to 3000psi man, it's hard! I have seen people using a machine to power up the pump like a robot arm theory, that will work better, but not a bicycle man, lol! If i have the space to store a bicycle here, I would buy a 1.7k compressor instead and skip pumping... lol..
Can you use this for airsoft hpa tanks? Will it keep moisture out of tanks?
@Chiinnature
6 жыл бұрын
you can , its the same kinda stuff, just that airsoft will use a low pressure reg with the tank, but filling is the same
G U R U
There is no way that your plastic add-on dehydrator is safe at 200 bar.
@uploadJ
7 жыл бұрын
The dehydrator looks to be installed on the INLET side.
You only nneded to tell it takes long and that pump takes alot og G psi.. and price of pump... We all know pumping we are nerd sportsman with iq toys.. and we read gude in box
英文up主
You look like a guy who has had Miles of experience with the hand pump.
Hiiiiiiiiyyyyaaaaaahhhhhhhh!!!!!!!!!! 👋🈲🇯🇵👋👋📸📸⚔️⚔️