Hearing Hannah saying she wants to show us her cans made me giggle.

@maxhammontree3169

24 күн бұрын

That’s exactly what I came to say😂

I appreciate you guys. A tip from an aviation electrician... score the insulation on the wires by running a razor blade around the outside, instead of shaving it off. You'll get a much nicer result.

I don’t think your videos are boring you guys have great content. Keep them coming. 👍🏻

Checking in with CWC enjoy watching your videos Don't be Dumb hit the Thumb to support them on there journey.

Earlier this evening as I was installing new battery cables on my boat my wife said to me “Why are you cutting up brand new Jumper cables?” I told her about how much cheaper they were from HF than battery wire from parts store..Then a couple hours later I watched this video…lol. I also used a set to wire a 12v source from my tow rig to my winch trailer. BTW use the case to store your ratchet straps for your tow rig..Works perfect. Love yall’s videos.

@bigdaddysshop8180

24 күн бұрын

Great Idea

Love your videos, and they are never boring. A hint on your cable coming from battery to the distribution block should be fused near the battery closer the better. Saves you from a fire if cable gets shorted

Hannah needs that jumper cable case in the "Viking" for "STUFF".

@lilorbielilorbie2496

26 күн бұрын

servantsglassllc She'll have to paint it teal first.

I’ve looked forward to this video all day. Please come down to Cruisin the Coast one year!!

You said it best Hannah. I do infact love your cans too. Your oil canisters are nice aswell!!!! Lol

Great job on the wiring. Helped a lot. Also show the air set up. Lines and valves. That way we can see the whole package. Thanks

Well…if I had only known you guys were needing kegs I just sold two just a little while ago!! From now on…I’m saving some off the wall things I find just for you two

For your air lines that go through the wheel well use bulkhead fittings, that would be a cleaner, sturdier job than a hole with grommets. Keep up the good work.

Just found yall's channel really enjoying content and rides. I worked for a company 40 years ago that had a Namco with a Onan motor. Best lift ever made, you cannot kill them things!!!

Love the idea of using jumper cables for cheap lengths of cabling.....Good wiring scheme on the compressors.....Soldering and shrink tube is a much better way to do wiring ends though.....That van will be awesome!

Hey homies how y’all are digging your videos never a dull moment with y’all always a joy hanging and watching Hannah she’s a delight!!

One of the things I like best about your channel other then both of you and your content. Is the fact I feel like your just an salesman on an infomercial.

Love your channel. I from Indy so I am glad there are some Indiana people out there making great videos. Keep up the great work.

Another very good video, good wiring with the compressors...you both take care. Love from the UK.

Hannah videos with y'all can never be too boring y'all are done awesome on the Grumman van it looks neat

Hi again CWC Corey and Hannah from the D Mi hey thanks 👍 much appreciated your time and video of some very informative info on connecting air compressor unit 👍🤩🌟

Hi cory and hannah just watched the video fantastic content again thank you sorry to see you have the same weather as us here in uk have a great weekend looking forward to next weeks installment already

Love watching you guys. Keep’em coming✌️

We love all of your video's keep up the great job

I like your portable lift! Eddie

Y'all do a fantastic job! Thanks for sharing with us.

I likd the distribution box idea! Eddie

Thanks Cory excellent description

Cory ever since I graduated and was on the Job sites I would always get the welding leads when they would replace the leads for stick welders!!! The welding leads have lots and lots of small strands of copper wire witch I think works much better than bigger strands of copper do!!! Also if you get some really good jumper cables they usually have smaller wires like the welding leads do!!! After saving welding leads for years I probably have enough to wire two houses up if it was the correct wire!! Lol!! You should definitely try using welding leads if you can find some old ones that someone might be replacing!!! I have never had an issue with using welding leads on any of my vehicles for the past 25 years!!!! Awesome stuff for sure!! I’m not sure what Napa or any other parts stores sells battery cables for but I do no that are farm stores sell the welding cable by the foot in two different sizes a #4 and a #2 and some have the really big stuff the #1 I believe it is!!! They run from 2.99 a foot to 4.69$ a foot and if I remember the really big cable was like 5.99 or 6.99 a foot!!! Plus it works good for running too those bus bars like you was using with the air compressors!!! Let me know what you think of using welding leads if you get some and use them???

The cable wire was a great idea I will do that too. Thanks

I like the wiring simple & neat good job

Love you young folks. Keep at it you have a great life.

Good job keep the videos coming

Those are some Nice eagles Hanna! Love it

Love your videos, homies!

Been watching you guys on tv your awesome

Awesome Video

Your Grumman van needs a “Grumman Phantom works” logo on it.

13 kegs? When do you need them? It might be a while for me to drink that much. But I'll try my best. LOL.

@jeffreydurham5342

23 күн бұрын

I'll help anyway I can lol

Super cool video once again❤️ Love the keg seats. I was thinking it would be cool to have the seats adjustable up and down like a standard desk chair but with hydraulic lift and lower. Very industrial with your valve controls on or near the seat for different size drivers/riders. And maybe even swivel 😵‍💫Just a thought. Keep up the great 😢work and enjoy your week❤️Be Blessed 🙏

@announcementman9399

26 күн бұрын

Not sure why there is a crying emoji in that line?? Maybe one that is sweating 😅 instead 🤓

Awesome adventure as always little brother and little sister great imagination with resources yall have an awesome day and be safe

Good job wiring the air compressor, really nice and neat brother! Good job! I love the beer keg seat idea, going to be cool! Thanks for sharing Hannah and Corey, sending prayers and positive vibes to you and your families! Hi to Buckwheat and Minnie! 🥰 Yall stay safe! 🙏🏻🙏🏻🙏🏻👏🏻👏🏻👏🏻👏🏻👌🏻👍🏻👍🏻🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🙋🏼✌🏻✌🏻

Love the keg seats.

great video

Another good one 👍👍

Hannah your can collection is very cool 👍👍👍🇺🇸

cool video nice job on the wiring for the air ride

I really like your cans Hannah. Lol

Good job and video homies.

I do the exact same thing with the jumper cables!! Done an ls swap on a 72 c10, and didn't want to relocate the battery and used that exact set to exent the power supply.

Your welcome to them and I love you guys ❤

Looking forward to seeing you two at Beatersville

@jeffcoleman5160

26 күн бұрын

We live in Goshen KY .we have our own upholstery shop we can help you with the two seats

I bought a hydraulic wire crimper from Amazon. It's great.

Thx Cory that helped a lot 👍

Awesome guys

Looking good... see you next week.. 😎😎😎🇬🇧

Keep on keepin on!!

You guys rock! Great content! Sorry about the bunny!

Hi Hannah, Looking Goood !!! : )

Corporate 2 metal tractor seats in top of kegs. Be cool and there pretty comfortable. Just a thought

Great idea for seats, Craigs Automotive-Sioux Falls Sd

Might check with local liquor stores and breweries to see if they have old kegs.

Awesome video ❤ are you all going to be at Frog Follies in vanderburgh Indiana this year? Much love from southern Indiana family.

Hannah has nice cans😊

Of all the nice women in these car videos I have just two favourites Hannah and Amanda Martin!

Got my safety third shirt yesterday

You should make a ring or something to weld or bolt in to the keg tohold the seat cushion up so you can store stuff under the seat as storage

Like you said. It may be a little boring. But still interesting

Cory check out the hydraulic cable crimped from Harbor Freight it works surprisingly well and crimps from all sides to give higher quality crimp

I haven’t read through the comments so I apologize in advance if you have answered this. The keg is under pressure empty? Is there something that needs to be done before it’s cut. I like the idea for an air tank for a train horn. Thanks in advance. Great job guys.

Another fun video. Just asking: your bar owner didn’t supply you with kegs? Can’t wait til next week.

I use welder cables for extensions.

Check with the beer distributor in your area they may have some old ones

I do the jumper cables also, cheap cable!

Y’all need to look at the Anheuser Busch eagle on a can of Budweiser

How about a wine barrels they’re larger and taller easier to have back support👍

Use what you cut off as a swivel base ??

Those jumper cables are copper clad. You want ofc copper a cheaper way to get it is welding lead wire from welding supply store. Way better quality.

You should cut the keg in the middle to section it, then add a swiveling piece off the bottom of an old bar stool.

The pressure switch does not use a hot and a ground. It should be wired with a ground and when it closes the ground passes through it grounding the solenoid kicking on the compressors. If you did hot and ground you would have a fire.

@billdake3932

26 күн бұрын

I came here to say this. Ground in, ground out.

@corywheatcustoms

26 күн бұрын

You’re right I said it wrong in the video.. both are ground

@TheCoryjones26

26 күн бұрын

@@corywheatcustomsI figured just thought it needed to be said before someone tried hot and ground lol. Love the content keep it coming.

Wow

Ok, I’ll check out your cans I guess😂

I like to melt solder in the terminal and push the wire down into it for a more solid connection instead of crimping

@bigdaddysshop8180

24 күн бұрын

If you ask 30 people how to do it you'll get 31 different answers.

Yeah I have a driveway instead of a shop. I feel y'all on the rain. I mean I know we need it but I just want to get my welding done. Then it can do it. Lol

Better build that new shop for hannahs cans she got a collection for sure😂

THe post Office sends those bags for their can food drive. You are supposed to put some can goods in it and leave it by your mail box for them to pick up and donate.

🖐️🖐️🖐️🖐️🖐️If you do them beer kegs right, you will have lots of storage in them! You probably can use the tops of the kegs upsidedown in the open holes 🤷🏻‍♂️, Hannah: y'all want to see my Cans 😂🤣‼️

Put lights in the top of the cans

a magnetic camera mount would be nice

where are gonna get those curved glass sections of the windshield?

Did you fill your cans with water or secure them so the wind or a storm won't carry them away. Just saying, took you awhile to collect them.

Use the viking box in the viking?

Sounds like beer taps would work for the shifter.

Will there be any comfort ??

Do you still have the Snap on Truck?

You live by IU, end off school year party’s dumpster diving anyone lol

I spit tea out of my nose T2:50 "I wanted to show my cans " . Quit it .

Why cut the keg ? How about welding a metal chair to the top of the keg and lower to right height by cutting bottom of keg . Then you'll still have the keg look and probably more comfortable.

You Two are So Nice,,, and you want to video opening each of the packages from your fans ... I think that we know that there is not enough time in the day to video all of the packages being opened..... Maybe you could get some nice Thank You Cards printed, maybe 3x5 cards with your pictures and the CWC logo ... You could write Thanks For The Whatever......

Heat shrink tubing on the power wires ?????

Cut the keg down the middle and I add a piece from another keg to make the seat wider