The good thing is you have a ton of boots you love. So you have many options to fall back on :) worst thing would be to search endlessly without any options in sight :(

@TheRollingRaptor

8 ай бұрын

Yes, indeed! Some people are really struggling with finding a skate that fits right. I consider myself very lucky in that respect. And for the AG10, I've still got heat molding as an option to fall back on.

The fit is a huge difference. I got these boots and even with stock liner they feel amazing, I must say that my mondo measure of 25.5mm was in between size 40 and 39 according to the sizing table. So I went for the smaller size, it was painful the first sessions but after the break in period is all good (haven't heat mould either). The only negative comments about the boots is that its a bit of a trouble to fit intuition liners (the non-wizard version) and the lacing system, in my boots some of the D-rings where the laces go through already broke. Disclaimer, I still need to try the seba cj boots, so i can't compare them. But so far I like the ag10s, specially because they are less bulky than the cj boots.

@TheRollingRaptor

8 ай бұрын

Yeah, I would really like to try the MyFit stock liner! But unfortunately, it isn't sold separately. Now, a friend of mine also has these and he's still struggling with pain, to the point that he practically stopped using his expensive skates. I've now put my Intuition V2 Small liners in them (the Medium didn't work) and I'm hoping for some dry weather to test them.

@WheelyArt

8 ай бұрын

I love my Iqon AG10s,you are spot on that the key is get the right size,I find the narrower fit in front than Sebas helps me with some pronation tendency.

@theAIex2

8 ай бұрын

@@TheRollingRaptor I had the same, I even thought I needed one size bigger since I had to take them off every 5-10 min. But that goes away, and afterwards the fit is very snug yet comfortable to wear for hours in a row.

@TheRollingRaptor

8 ай бұрын

@@theAIex2 Cool! I’ll notify my friend he should keep trying. 👍 Thanks for the information.

@theAIex2

8 ай бұрын

@@TheRollingRaptor by the way, I forgot to mention, using flat waxed laces makes also a huge difference, with the stock round laces of the ag10s is difficult to keep them uniformly tight

Heat molding when it is already too wide?! I hope it is gonna work out.

@TheRollingRaptor

8 ай бұрын

Yeah: the idea is to make the carbon flexible and then lace up _real_ tight, so the fit adapts to my feet. (Which is the point of heat molding, innit? 😉) The carbon cuff is also too wide, so heat molding will help to bend the carbon into a shape that better suits me.

I have tried them with the intuition premium and they were too tight, with the v2 they are incredible! My mondo is 260mm in EU 41. I ride with kizer element 90 frame.. urban killers!!😉

@TheRollingRaptor

8 ай бұрын

Thanks for the tip! My V2 Medium was way too tight as well, couldn’t get my foot in, but the V2 Small seems to fit quite right. Fairly tight around my toes, but I’m gonna try it soon!

@ThePikirocker

8 ай бұрын

@@TheRollingRaptor yes!!! I have got de small size in v2 liner!❤️

@FabiusPyromanus

8 ай бұрын

@@ThePikirocker Sounds like a killer set up! Both in feel buts also in the looks department for sure.! Have you shared any photo or video?

That's unfortunate :( I've been using the AG10 with intuition premium liners for almost a year now, and I love them. Learned all my wizard skating on them with the NR100

@TheRollingRaptor

8 ай бұрын

Oh, consider yourself very lucky! I'm a bit jealous now. 😅 But good idea you've got there. I've got a pair of Intuition Premiums in my USD Aeons, I will try those as well in AG10. I _really_ want that boot to work. 🙂

@flyzeex4393

8 ай бұрын

@@TheRollingRaptor I believe you're right about me being lucky. My foot and liner fit perfectly in the boot with an insole underneath the liner and no shock absorber. I also use the buckles instead of the straps

I'm surprised the boot could influence so badly how a good frame feels!

@TheRollingRaptor

8 ай бұрын

Crazy, eh. But a bad-fitting boot can really destroy the whole skating experience. The IQON AG10 is lighter than the bulkier Seba CJ Prime, and still it felt heavier since I had less control.

@natanlakonishok

8 ай бұрын

Oh shit , it sucks even more, because this boot looks so hot 😪

@TheRollingRaptor

8 ай бұрын

@@natanlakonishok Yeah! But this story's not over yet. I'll try riding it with the Intuition V2 Small and I guess heat molding will also help. This skate's too beautiful to let it gather dust. 🙂

A shame to hear that. I have hope however, as I have narrow feet and I'm slightly bigger than a 40 but too small for a 41. I absolutely have to purchase carbon boots and heat mold them for a skate to properly fit.

@TheRollingRaptor

4 ай бұрын

Well, I'm working on solutions. First thing I tried: the Intuition V2 liner, size S. Worked way better than the Wizard 3M Intuition. Great fit: I had the control I was hoping for. Only (major) downside: my toes start aching after about an hour or so. My feet are just a tad too large for the Small V2. And the Medium V2 is too big to get it into the skate. But I've got other options as well. :-) Have you already tried an insole? That could help too.

@grzegorzg3996

10 күн бұрын

What is your mondopoint? Did you find solution? What was you final choice of size? I have the same problem. MP 262 mm

And the follow-up?.....

@TheRollingRaptor

2 ай бұрын

I’ve already recorded _three_ follow-ups, but still have to edit them. (I’m sitting on a mountain of footage and time is not always by my side. 😅) I can say for now: it was the liner after all and I’ve found a couple of solutions.

@lewis7515

2 ай бұрын

​@@TheRollingRaptor Intriguing.....

Friggin iqon…

@TheRollingRaptor

8 ай бұрын

It's a trap!

Sorry mate you have no idea what you are taking about. The IQON AG10 are the best skates you can buy on planet earth right now.

@TheRollingRaptor

2 ай бұрын

Sorry, pal, but it seems you didn’t comprehend the message of my video. Which was: the liner I got with the IQON AG10 didn’t fit the boot and I had to find a solution for that. For the record: I’ve found a solution. (I now very much like riding the AG10, video coming up in a couple of weeks. 😎) Another thing: in this video, I’m clearly speaking for myself and about my own disappointment. But you seem to take your own feet as the golden standard. Now, if you know other skaters, you should know there’s no one-size-fits-all: what fits great for one person can feel awful for someone else due to the shape of their feet. And did you really compare _all_ skate models available to make such an outrageous statement? I mean, I’ve got 20+ pairs of skates and even I wouldn’t dare to declare something the best (or worst) skate you can buy on the planet. And the again: it all depends on what you’re planning on doing: aggressive, wizard, urban skating … Apart from all that: thanks for your comment! Keep rolling. 🤘

ついに手に入れたのですね。 高い買い物だけに期待を裏切られると悲しいですね。

@TheRollingRaptor

8 ай бұрын

Luckily, I can still try heat molding them. We'll see what that'll give.