Great vid and excellent tip buddy. Keep um coming 😉
@jgriffiths903 жыл бұрын
Excellent video- thank you so much! You've saved me a lot of time today :-)
@goldgas12165 жыл бұрын
Bloody clever stuff! Great vid
@d.r.plumbingheating32986 жыл бұрын
Another brilliant video
@paulrossiter95674 жыл бұрын
Quality viewing from my side 👍⭐️👍
@coolhamza99705 жыл бұрын
An Excellent Video with Knowledge.
@hamzaparvais39482 жыл бұрын
Wow amazing and clever thanks watched video about 20 times thanks
@caerleon91763 жыл бұрын
The cause is easy to see, the plate wasn't fitted correctly in the first place - 1.26 you see the butterfly alignment tabs are not correctly inserted in the plate, due to this it would require more air pressure to push them back, than if they were properly aligned - when you re-insert it, the pins are correctly aligned. The root cause is an initial incorrect assembly or the last person to work on it!
@liamwetton3811 Жыл бұрын
So how come the settings need altering after the plate has been replaced? Aren't the settings the same as before? Im doing one of these in a few days so just doing my research.
@darrenclarke1613 жыл бұрын
Awesome vid 👏👏
@traian23us4 жыл бұрын
Wish I new all those settings on Worcester Greenstar CDI
@Chris-mk2fk2 жыл бұрын
Bit late to the party, love your vids. Just interested in what the bearing plate is there for? Would assume it's like a non return valve but can't see how one that has come apart would cause a lock out unless it was there as part of the burner mix.
@hadjarramouche99845 жыл бұрын
Love your videos I was called out to a repair the boiler is starting very slow few tenths stops in lieu temperature and then kicks off this starts running as normal Any advice much appreciated
@arunask36893 жыл бұрын
Hi, what possible issues could be, boiler was off for a while and now getting EA error code when open hot waterin the bath. Other taps seems OK. Looks like it's struggle to heat up water.
@dangas64224 жыл бұрын
How you know is error with that mate csn you show how found it
@simpsongary986 жыл бұрын
Any more videos coming mate
@caerleon91763 жыл бұрын
Last winter it packed up, no heating or hot water, oddjob attended 2 days late and couldn't get it started he then told my landlord it needed replacing! 900 quid...in 3 weeks time as the parts are no longer made for a 4yr old boiler! WTF! I found the cause, was due to lack of service by the landlord, the condense trap blocked and caused a water backflush and leak inside where the gas solenoid sites next to the plate (junior 28i), filled with water - clear to me as an Engineer this was the cause and easily fixed. He gave up and all I did was blow the water from the connection and it worked! Been working ever since. He hasn't been back since! I know that there are now more 'plumbers' in this country due to our EU workers, but Jesus where's the pride in your job and all attempts to resolve by simple deduction just to get some profit!
@simpsongary986 жыл бұрын
Good video
@caerleon91765 жыл бұрын
Was I seeing things or was the bearing plate already incorrectly installed when you took it off? 3 Plastic dowl pins were not aligned into the plate or was this due to TV magic?
@kevint3845
4 жыл бұрын
caerleon9176 yes I thought the same 👍
@paulgannon32613 жыл бұрын
Why did you not just take off the burner head to get to the bearing. No gas connections to disturb and also a part normally removed when serviced
@Dr.Stacker
Жыл бұрын
was thinking the same
@charliesebbage94014 жыл бұрын
Agree with other comments! Worchester are overly complicated & not half as good as people or Which magazine think! Better boilers out there for almost half the price
@paulgannon3261
3 жыл бұрын
In 42 years I have to say Worcester are my most reliable, don't touch Italian or French as they are poor and have a excellent trade in repairing anything beginning with V
@Adventure_Awaits1016 жыл бұрын
Another great video, why do you alter the fan speed setting ? Also best thing to clean out the main WB5 heat exchanger as the brush and scraper are not that good, coke or bicarbonate of soda ? Thanks 😎
@WEYHARRY14 жыл бұрын
Do you just specialise in Worcester Bosch
@geoffreyneedstraining5856
4 жыл бұрын
yes
@johnalderweild64425 жыл бұрын
Why not undo the burner from top end rather than mess with gas valve.
@shilks8773
4 жыл бұрын
Then with the Manifold removed - the burner could also be given a quick clean.
@kevint3845
4 жыл бұрын
John Alderweild that is the official way ie undo burner from the top, you do need to get a new burner joint as well
@micmac69
Жыл бұрын
I magine then you'd have to do a full service and Geoffrey was showing attacking fault from another angle. I'd of removed top seal etc. Don't know why settings had to be changed? Presume was checking but altering to his preferred settings 🤔
@petersutton30545 жыл бұрын
Good video's but music is a bit loud and distracting.
@thegasmanajay
5 жыл бұрын
There is a round thing with volume written underneath it - some people turn it anticlockwise when things are to loud
@petersutton3054
5 жыл бұрын
@@thegasmanajay even better if you don't put it in lol
@Fatboymk4 жыл бұрын
Wish I had seen this video before signing up for a 12 month contract with Worcester :(
@cliftonpoynter56054 жыл бұрын
Over complicated boilers and unessasary. Just means Worcester get the call when the engineer gives up and can charge the customer nearly £300. Great video but would prefer verbal explanation of what u are doing instead of daft music
@tomadams94
4 жыл бұрын
That’s the engineers fault for being incompetent
@cousinbenson2999
3 жыл бұрын
Hi, theres nothing wrong with the engineering of these boilers, I would say you're probably better off flipping burgers if that's not too taxing on your brain, also you should learn some manners 👍
Пікірлер: 38
Great vid and excellent tip buddy. Keep um coming 😉
Excellent video- thank you so much! You've saved me a lot of time today :-)
Bloody clever stuff! Great vid
Another brilliant video
Quality viewing from my side 👍⭐️👍
An Excellent Video with Knowledge.
Wow amazing and clever thanks watched video about 20 times thanks
The cause is easy to see, the plate wasn't fitted correctly in the first place - 1.26 you see the butterfly alignment tabs are not correctly inserted in the plate, due to this it would require more air pressure to push them back, than if they were properly aligned - when you re-insert it, the pins are correctly aligned. The root cause is an initial incorrect assembly or the last person to work on it!
So how come the settings need altering after the plate has been replaced? Aren't the settings the same as before? Im doing one of these in a few days so just doing my research.
Awesome vid 👏👏
Wish I new all those settings on Worcester Greenstar CDI
Bit late to the party, love your vids. Just interested in what the bearing plate is there for? Would assume it's like a non return valve but can't see how one that has come apart would cause a lock out unless it was there as part of the burner mix.
Love your videos I was called out to a repair the boiler is starting very slow few tenths stops in lieu temperature and then kicks off this starts running as normal Any advice much appreciated
Hi, what possible issues could be, boiler was off for a while and now getting EA error code when open hot waterin the bath. Other taps seems OK. Looks like it's struggle to heat up water.
How you know is error with that mate csn you show how found it
Any more videos coming mate
Last winter it packed up, no heating or hot water, oddjob attended 2 days late and couldn't get it started he then told my landlord it needed replacing! 900 quid...in 3 weeks time as the parts are no longer made for a 4yr old boiler! WTF! I found the cause, was due to lack of service by the landlord, the condense trap blocked and caused a water backflush and leak inside where the gas solenoid sites next to the plate (junior 28i), filled with water - clear to me as an Engineer this was the cause and easily fixed. He gave up and all I did was blow the water from the connection and it worked! Been working ever since. He hasn't been back since! I know that there are now more 'plumbers' in this country due to our EU workers, but Jesus where's the pride in your job and all attempts to resolve by simple deduction just to get some profit!
Good video
Was I seeing things or was the bearing plate already incorrectly installed when you took it off? 3 Plastic dowl pins were not aligned into the plate or was this due to TV magic?
@kevint3845
4 жыл бұрын
caerleon9176 yes I thought the same 👍
Why did you not just take off the burner head to get to the bearing. No gas connections to disturb and also a part normally removed when serviced
@Dr.Stacker
Жыл бұрын
was thinking the same
Agree with other comments! Worchester are overly complicated & not half as good as people or Which magazine think! Better boilers out there for almost half the price
@paulgannon3261
3 жыл бұрын
In 42 years I have to say Worcester are my most reliable, don't touch Italian or French as they are poor and have a excellent trade in repairing anything beginning with V
Another great video, why do you alter the fan speed setting ? Also best thing to clean out the main WB5 heat exchanger as the brush and scraper are not that good, coke or bicarbonate of soda ? Thanks 😎
Do you just specialise in Worcester Bosch
@geoffreyneedstraining5856
4 жыл бұрын
yes
Why not undo the burner from top end rather than mess with gas valve.
@shilks8773
4 жыл бұрын
Then with the Manifold removed - the burner could also be given a quick clean.
@kevint3845
4 жыл бұрын
John Alderweild that is the official way ie undo burner from the top, you do need to get a new burner joint as well
@micmac69
Жыл бұрын
I magine then you'd have to do a full service and Geoffrey was showing attacking fault from another angle. I'd of removed top seal etc. Don't know why settings had to be changed? Presume was checking but altering to his preferred settings 🤔
Good video's but music is a bit loud and distracting.
@thegasmanajay
5 жыл бұрын
There is a round thing with volume written underneath it - some people turn it anticlockwise when things are to loud
@petersutton3054
5 жыл бұрын
@@thegasmanajay even better if you don't put it in lol
Wish I had seen this video before signing up for a 12 month contract with Worcester :(
Over complicated boilers and unessasary. Just means Worcester get the call when the engineer gives up and can charge the customer nearly £300. Great video but would prefer verbal explanation of what u are doing instead of daft music
@tomadams94
4 жыл бұрын
That’s the engineers fault for being incompetent
@cousinbenson2999
3 жыл бұрын
Hi, theres nothing wrong with the engineering of these boilers, I would say you're probably better off flipping burgers if that's not too taxing on your brain, also you should learn some manners 👍