Guys, nice review. I own 2-350 Legends, .223 Wylde, .22LR, 9mm Bufferless, .308 & 6mm ARC on order. All from BCA, All have been 100% Reliable & All Very Affordable & the in my opinion, the Best way to Learn How an AR platform works ! Keep up th Great Work. 👍

Never had issues with BCA

@stick3024

2 ай бұрын

Me neither... they offer exceptional value for the civilian market

I appreciate the fact you went over more than just one rifle. Most reviewers just have one sample size and that doesn’t give you good data on the quality or lack of. I would only use these for plinking or limited types of home defense. I’m going awol if they put me in the trenches of war with one of these. Also to counter your one of your points, if my rifle breaks when I need it, I don’t care that I can send it in to get it fixed by the manufacture if I’m dead in a ditch. Good job keep it up!

@johnevans1969

3 ай бұрын

It's a tool, a craftsman, not a snap on, but they do work, consistently, just as well as my Armalites and DPMS, and Springfield Armory M1A's. If something breaks, you must be able to fix it yourself and get back in the fight, just my experience 😊

@knunn5171

3 ай бұрын

Who sets around and thinks about all these scenarios. This larping bs is getting ridiculous. Just who is going to put you into trenches with a bca?

@WhiskeyTheRaptor

3 ай бұрын

@@knunn5171 man you sound like a lot of fun at parties

@nathanalex7797

Ай бұрын

@@knunn5171 you were why in the 1400's they burned people.. your defending a public speaker (majority) you don't know, from someone on YOUR side(minority). Then confusing someone's imaginative step into a sh^* warfighting scenario, where he uses obvious hyperbole and comedy to convey emotion, with anything other than the funny anecdote it was. Either your devoid of human life and have no empathy to foster the creativity it would take to imagine yourself anywhere but exactly where your are doing fuck all, you have a brisk temp IQ in the high 30's, or your projecting. Either way you sat around thinking of a scenario in which someone else spends their days thinking about random situations. Making your first statement hypocritical, the second is protectory, and the third delusional. seeing's how, unless you believe Russia, people are dying with the cheapest shit their country makes by the 1000's. Something every good person has is Imagination, sympathy, forethought, empathy, contemplation, altruism, & egalitarianism. Every principal but imagination requires the one before it. Imagination exists before your even self aware. Its a set of steps you take in order and deviation is a choice. Though, you'll likely never read this as most will find a word they don't understand and write it off as this or that. If ANYONE reads this and understand, then you would also know that everyone who thinks like he does is the reason why your employed, have public services, emergency services, a trillion dollar apparatus to keep the Chinese from enslaving you. Because if we went by your rules we would still burn people for "heresy". If every comment requiring imagination to attempt to relate to to others is "larping bs" that is soooo common it "is getting ridiculous" enough to get a comment with braindead likes out of you. The only thing I will truly think about all the time now. Is how you have 4 like but didn't pass the guy ahead of you... Almost like those other 3 accounts are your same IP which bring this whole sad larping charade to a close. Hopefully I fed the intense attention lack your absent parent(s) left you, and you'll be around to comment back. But I can only think of the scenario where your dumb ass see the size of this comment and gives up right there. Hopefully it enthuses all. and you gimme a response. Do the one thing you can to prove me wrong and respond.

I have several BCA uppers and a complete rifle. All work good and haven’t let me down.

I have a short BCA upper that I only use as a plinker and training platform for my sister's kids. I hand picked components and assembled my home defense gun, which I have no problem entrusting my life to. Anyways, the BCA upper is on an Anderson lower that I completed. It's never had a single failure on any components, and runs my CMMG .22LR conversion reliably as well. When budget was my main consideration, BCA was able to fulfill my needs, and I won't trash talk them, or anyone that can only afford them. For the naysayers, as a reminder, Aero had a run of bad QC several years ago. No company is immune.

Appreciate the video and the info. Was looking at building a truck gun and was looking at BCA, definitely helped me make my decision.

@ChamberOneTactical

2 ай бұрын

So glad you tuned in, and that the information was helpful. This is the main reason we have our channel. Stay safe!

I really appreciate you taking the time to do this.... I am hitting SUBSCRIBE now and referring all my firearm friends to your channel.

@ChamberOneTactical

3 ай бұрын

Thank you so much for the support!

I like your BCA'S . I REALLY like bca i have 3 of there barrels and two of there uppers. I went through 850 rndsz of 7.62x39 and had oem extractor and firepins fail . Got extras. I clapped it out with new handguard and mft stock fde . Love it!

I habe a bca 5.56 20" 7:1 upper that I put on a bushmaster comp. lower with two stage trigger. Use it out to 600+ yards with no accuracy issues. Thanks for the comprehensive review.

Pretty cool in depth video. Really enjoyed watching.

My one upper I own has been rock solid and has never had an issue to this date. I am quite happy with it for the price and quality of my particular piece. Glad I took a chance.

@ChamberOneTactical

2 ай бұрын

Glad to hear. Great product for the price!

I have AR stuff from all over the spectrum in terms of quality and price. I appreciate that they give us vets barrels and stuff like that around the holidays sometimes and purchased an upper from them because of that. Its fine for range stuff and better than nothing. I was underwhelmed with the upper for sure. The coatings seemed kind of poorly applied and the fitment was meh. That being said, I wouldn't recommend them to a friend and would most likely direct them to PSA for budget friendly AR components. I won't bash them either because I respect any company going out of their way to make affordable firearms for the masses. I agree with the saying that the best AR is the one you can afford.

My first ar from bca was a total show. Chambered in 6.5 Grendel. Everything was loose including the barrel nut. Extractor broke within a couple mags. Side charger bolt bent from trying to get the stuck shell out. I put it on a psa lower. And it shot horrible groups. Since I swapped barrels to x39. I put together a 556 blem kit from psa and was flawless. I really like the side charger so I just ordered a x39 pistol upper. I checked and loctited the entire upper and was surprisingly pleased with it. 20rd Duramags are definitely the best for the caliber. Asc worked the best with the Grendel

BCA 10 in 308 2k threw it no problems not one malfunction. It will hold a 1/2 inch at a 100 yards and it has been to a 1000 yards. I shoot the 178 eldm with cfe 223 for a 1000 yards.

@5jjt

3 ай бұрын

You got a 10" in 308?!

@gunnshotts9892

2 ай бұрын

I call straight bullshit. No way ANY BCA is a fucking ½moa gun. I've had HUNDREDS of broken (catastrophic failure) BCAs come thru the shop. I repaired as many and NONE were capable of 4moa consistently (I've been shooting competitively since the late 80s including camp perry) You sir are full of shit. ½moa. Bahahahaha

Bought one of the right side charging, 223 varmint uppers a couple of years ago, after it had a bunch of 5 Star reviews. Just the upper. Put it on a Wilson Combat lower. Runs fine. Side charger is nice as it doesn't get in the way of a large optic. 🤠

Great review fellas I own 22 mag , 17 HMR , 350 Legend and just ordered a 6 mm ARC all uppers so far have been great !

@ChamberOneTactical

4 ай бұрын

Great to hear! Thanks for the support!

@leesmith8646

3 ай бұрын

My 6mm arc runs good and accurate. Took a few weeks to get because they fly off the shelves. But was worth the wait I think. Love the side charging handle.

@luismariscal3601

3 ай бұрын

@@leesmith8646 I got my 6mm ARC and got it shooting sub .75 MOA with 75gr V Max at 3054 fps so far it’s great

@jakefromstatefarm1405

Ай бұрын

I got a 17hmr last week, just need to buy a lower for it. I'm really excited to try it out, especially since I have a suppressor ready to go for it

I have a BCA 450 Bushmaster barrel, that thing shoots the lights out- that barrel is accurate! Thanks for your video, I enjoyed it.

I have a 16" 223 wylde and a 18" heavy barrel .450 bushmaster that I deer hunt with it in indiana . Both of them have been 100% reliable and both very accurate

As a left handed shooter that right handed side - charger is PERFECT for me. I am right handed left eye dominant and not counting .22 lr LEARNED to shoot rifles in the Army with m-16 A3 LEARNING very early with that rifle to use a bent stripper clip in the ejector port cover as an improvised brass deflector to keep VERY HOT BRASS out of my right elbow pit. I love the AR with that side charging handle. A pistol I can shoot with either hand still aiming with my left eye but a rifle (including pistol length rifle) is going to be fired left handed. That charging handle deflects the rounds forward YEAH!!!

My 18" 223 upper has been awesome for me. It's probably had 1k rounds through it and puts 3 inside a quarter at 100 yards. I've got nothing negative to say about BCA.

I have quite a few BCA uppers and the only one i had any issues with was my 350 legend and all that took was polishing the feed ramps. All the others have been flawless

Im loving this series big dog ! It's yamalicious !💪🏿🤙🏿💯

@ChamberOneTactical

Ай бұрын

Awesome man!! We appreciate it!!

Love that free energy !

Good comments made on various problems found with these uppers. I own various BC uppers in different sizes, calibers, side and conventional as well. My experience has been with poor quality control. I strongly recommend before using any of them is to polish the chambers as I found all of them to be rough, therefore, creating feeding problems. I also recommend to buy enhanced firing pins for any BC bcgs as I had 100% failure with the BC enhanced firing pins. Buy enhanced firing pins other than BC and you will be alright, The 7.62x39s problems have been the most problematic with high capacity mags. I am currently sung the 10 mags with good success. Also, a very important piece to replace is the bolt ejector. The bolt ejector will not hold long because is too thin. I purchased the phosphate bcg ejectors from Right to Bear Arms and none of them have broke. After doing these upgrades, all uppers are working smoothly. Hope these points help others in getting their BC pieces in good working order.

@wymonwatson1309

3 ай бұрын

I have great luck with asc 20 round mags, d&h 30 rounds have operated flawlessly, as well as the 28 rounds c-products duramags, I even have a 30 round promag that works perfectly, after a little fileing 😂

@dinadaughtry8993

3 ай бұрын

The 7.62-39 comes with the enhanced fireing pin but I had the same problem with the extractor other than being a little bit heavy (I got the 16 inch heavy barrel) it is accurate and runs good with ASC 20 round magazines

I have 3 bca uppers . A .223, 7.62×39 & .22. 2 of the uppers are on PSA lowers the .22 is on a polymer lower I bought brand new for 40.00 complete and it shoots so smooth. I haven't had one problem with any of my uppers with 300 or more rounds out of them. Good video .

Thanks for the Review. I was on the fence. Now I got one in my Cart. BC-15 | .300 Blackout Right Side Charging Upper | 16" 416R SS Black Nitride Bear Claw Fluted Heavy Barrel | 1:8 Twist. Bear Creek Should Sponsor you 2. Great Content. Thanks again.

@ChamberOneTactical

Ай бұрын

Glad we could help.

Ive got the 223 wylde ss 20inch barrel complete rifle. Very reliable and very accurate

I haven’t tried it yet but have you tried to put an M-lock pick rail on the top section of the forearm to help with your light switch pad

Other than one broken extractor the 7.62-39 is accurate and runs good on an 80percent lower milled out at home with a mil spec lower parts kit (they come with an enhanced fireing pin) building the 308 was a learning experience you have to get a longer buffer tube because of the long bolt carrier needs more room to travel far enough back, now functions good except for the bolt catch was the wrong one in the parts kit, they just need a good going over before shooting to make sure everything is tight and staked properly and they are a little bit on the heavy side ASC magazines work best for the 7.62-39 in the 20 round size, the 308 will feed with any brand magazine

I had a M16A4 build with the bear creek upper a couple years back. It ran pretty well for a $450 gun. 😊

@ChamberOneTactical

2 ай бұрын

Yes, we agree. Keep safe out there!

Can those BCA side charging Uppers use a side loader like a BF-10 or MA-Loader? Live in NY with a fixed mag law.

I own 2 of their uppers. A 7.62x39, and the 12.7x42. Both have been great, but both are mag specific calibers. Duranag makes a stainless steel 7.62x39 mag that is especially for those wedge shaped cartridges. Only the very bottom portion of the mag is curved. Never had a feed issue using them. On the Beowulf my main suggestion is get a good muzzle brake from the start. The little spiral cut flash suppressor that comes on it will leave your shoulder purple for a week. Also it needs a 12.7 or at least 450bm magazine. I tried modifying several different multi caliber mags myself and always had feed problems. And even with a 450bm mags you need to dremmel out a deeper crescent in the front edge of the mag so those big .50Beowulf casings don't catch on the edge during the feed cycle.

Bear creek hammer forged barrels are made on GFM equipment which is owned by Steyr Austria out of 4150 steel bolt and carrier ? But barrel should go distance

I think BCA uppers are pretty good. Most of the issues that I have heard from people usually involve the the bolt or BCG in general. If you have some good quality BCGs around, Id say go for it. Throw a Sons of Liberty, Spikes, Aero, any decent BCG in there and I think its a win. The BCG is the heart of the gun. I got a .300 blackout upper, threw in a Sons BCG, and it works great. The barrel isnt going to last as long as a DD or Bravo Company, but hey, you can always swap the barrel

Do you have experience in building an SBR in 300blk (5"-6" barrel)? - If so, do you have a preferred brand for the upper and lower? (Or a preferred brand for the completed gun?) Thanks

Thanks big brothers I'm ordering a 50 cal BCA today great video

@ChamberOneTactical

Ай бұрын

Awesome, we are glad you enjoyed the video.

@ChamberOneTactical

Ай бұрын

Good to hear! Looking forward to hearing how it works for you!

Hey guys great reviews, what about their pistols tho? Like the grizzly? Does anyone know if that pistol is a quality buy?

Have 5 uppers 1-6.5g, 2-7.62x39, and 2-300blk. One 300blk barrel had a defective chamber resulting in a DOOB that completely destroyed the bolt and made the upper receiver trash. both 7.62x39 uppers had improperly torque barrel nuts (don't ask how I found that out) . The uppers that worked did shoot very accurately. You get what you pay for

If I'm not mistaken, the lack of picatinny on the uppers is for weight reduction.

a BCA 223 wylde with 18 inch barrel 1:8 twist 5R rifling upper and lower for $300 you can't beat that haven't shot a lot maybe 100 rnd but all good

@dsrrecordsent

3 ай бұрын

20” NATO even better 😉

I had one issue with a 12.7x42 BCA upper. I sent it back for repair and had it back in 2 weeks. No cost to me. So far no other notable problems with a dozen or so BCA uppers in a wide variety of calibers.

@ChamberOneTactical

2 ай бұрын

We are glad to hear you got it fixed. We like to hear from our KZread family how the manufactures are responding and the customer service they provide.

The two BCA guns I have the barrels are really good.

what do you guys think about unlined parkerized barrels in general? are they really as bad as some say online and require too much maintenance?

My x39 bca upper was good for nearly 2k rounds, then a lug sheared off the bolt, bca sent me a new bolt, and a new carrier even though I only sent them them just the bolt, however the extractor broke on the new bolt within less than 150 rounds 😮 I never had an issue with the original don't know if the quality went down, or I just got unlucky? Also the customer service at bca these days is absolutely atrocious, they used to be great, now they ignore your emails and your messages, they have ignored me for the last 6 months regarding an ar10 upper I'm having warranty problems with. So bottom line, yeah for the money it's a good base line, but their support is terrible and your odds of getting a bad upper/rifle is worse now than it was in the past.

Bear Creek Arsenal if it's broke they won't fix it

@flynnryder7798

2 ай бұрын

I bought one of their uppers that had a problem. The sent me a call tag and then returned it to me a week later perfect. I later bought two more uppers because of the customer service. It’s been a few years now and all three have been flawless. Granted, I don’t shoot as much as I wish I did…

@doctordifferentialspeedsho9506

2 ай бұрын

They sent me an extra extractor for my 7.62 because i heard it was an issue. Gun has a binary in it and run it often. Probably 5000 rounds through it and still have the spare. I got lucky from my knowledge. Great guns and uppers. Go over it as you should any gun you buy. Locktite the screws and torque them, including the gas block, but if you do that and clean them like any other firearm you’re good to go

@livefreeordie1776

Ай бұрын

You have obviously never dealt with bca.

@cedrickmcdonald5038

Ай бұрын

Well I remember buying a 20inch upper from them and it shot like crap just a waist of money

@rbarnes8169

Ай бұрын

They have excellent customer service. Only had to use them once for a firing pin that was iffy but worked and they sent me a new one next day no questions asked

I would like to see and hear about the BC8 30.06

Sold mine but I definitely appreciate the affordability of BCA

BCA makes a hella product for the price. Crazy accurate also. I cant see a 1/2 mile anyway muchless pid a hostile target lol

Great review. I have their 7.5 556 on a psa lower. It's a plinker/range toy but I would trust it to help with "unwanted guests"

Great review

@ChamberOneTactical

2 ай бұрын

Thank you! Keep watching and invite a few friends!

Had feeding issues on 7,62x39. extractor and firing pin isues . I was going to change to adgustable gas block and the original gas block had no screws.. Illegal alien quality control

ive only seen issues with the side charging handles, ive never heard really any issues with rear charging handles.

@musek5048

18 күн бұрын

thats usually my rule of thumb with bca, i bought my first upper from them back in 2015 so i figure that by now they have the normal style ar15 setup down. from what i've read online its usually the more oddball calibers that have weird issues, mainly the 7.62x39 and bigger rounds

hey guys i have already commented before on another video about your uppers. No answer or info??? I have one of your 20" SS 308 uppers and i paired it with a lower thaat for some reason, dosnt allow the magazine to go up far enough into the upper for it to feed properly????? I purchase one of each of the two mags you suggest on your site store. I Think the problem may be solved with a magazine that inserts far enough up into the upper for the BCG to catch the round right. But do you guys here have any suggestions, or info that may help me troubleshoot this? thanks

@ChamberOneTactical

Ай бұрын

What lower are you running

What fde muzzle devises are those looking to get one for a 300 blackout

@ChamberOneTactical

3 ай бұрын

Witt machine SME

No complaints whatsoever on my BCA’s (and use Duramags in 7.62’s) 20 , 28 work great

Will you please tell us what was the fastest trigger that you shot? Do you have any recommendations? Thanks, Randy

@ChamberOneTactical

2 ай бұрын

One trigger we like to use is the palmetto state single stage 3.5 lb trigger. It has very similar performance as our cmc trigger but for much cheaper. They go for $89 but you can see them on daily deals for $79.

@RandySides-iv3kh

2 ай бұрын

Thank you very much, I will definitely try them

YOU NEED TO HEAD CHECK THE 76. CHAMBER, BECAUSE I HAD A ROUND GET STUCK IN THE CHAMBER AND THE GOOD THING IT WENT OFF WHEN GUN WAS FACEING DOWN. ( NO ONE GET HURT)

If you want quality budget then buy Diamondback Tactical. Way better that Bear Creek.

@ChamberOneTactical

3 ай бұрын

We are actually about to post a video on the Diamondback. Make sure to check it out.

@dsrrecordsent

3 ай бұрын

Diamondback 💯🇺🇸👍

@joesashiify

3 ай бұрын

Is Diamondback any good for their 6.5 Grendal barrels?

side charger on an BCA upper snapped off first day on the range

@flynnryder7798

2 ай бұрын

Did they fix it? I had an issue with one of mine first day and they fixed it.

@paulfrevert3662

Ай бұрын

Was it the first generation or 2nd gen

@inthewoods3237

26 күн бұрын

You have a hook for a hand???

@11:18, which caliber is being fired? It seems like it's hitting so hard.

@ChamberOneTactical

3 ай бұрын

7.62x39

My son has a 458 socom he purchased from these guys It doesn't feed right he sent it in they had it for about 7/8 months and after several dozen calls they finally sent it back it doesn't look like that they did anything to it but stick it in a different box and finally sent it back with the exact same problem when my so called they told him that that no there problem

@joeltipton6038

Ай бұрын

In most cases of improper feeding the magazine is generally the culprit besides that it could be a gas issue .

so is BCA the absolute cheapest option you can go for? is there nothing else in the that price range give or take 50 bucks? PSA is usually at least 150 bucks more for something comparable. I dont know of any other brands in the $200-300 range do you?

@ChamberOneTactical

17 күн бұрын

There might be someone out there that might be cheaper but not as big as BCA. BCA is normally the cheapest.

Have you ever broke an Extractor on the 762 by 39? I have twice?!

@ChamberOneTactical

4 ай бұрын

We have 3 different 7.62x 39 uppers from them and haven’t had that issue. We primarily shoot steel cased ammo out of them also. But we will definitely let you know if we have any issues.

@pineappleb122fligerhorst4

2 ай бұрын

@@ChamberOneTactical BS

@inthewoods3237

27 күн бұрын

It’s pretty much a normal thing in the AR platform because they have to mill the extractor thinner for the larger diameter cartridge, same with bolt lugs. Get a storage grip and keep an extra and firing pin inside.

I’m a big fan of Bear Creek Arsenal and I own both traditional and side charging rifles of theirs BUT with side charging bcg’s from them you’re locked into their items. You can’t upgrade or replace the bcg from another company. That’s the hook.

@ChamberOneTactical

2 ай бұрын

We agree, they are producing a pretty good product at an affordable price point. We look forward to continuing to monitor the products as they advance.

What are the FDE muzzle devices?

@ChamberOneTactical

3 ай бұрын

Witt machine SME.

Mine came overgassed af

You dudes twins? Helpful review 👍

@ChamberOneTactical

4 ай бұрын

We aren’t but we might as well have been 😂

There's nothing wrong with starting with a BCA and finding what you like and don't like about it, then upgrading to higher quality parts so your have a weapon you're happy with.

@ChamberOneTactical

Ай бұрын

Well said! Couldn’t agree more!

I bought two uppers 223 16 and 308 16 both never functioned no more bca for me

Anyone here have experience with .17 hmr upper from BCA? I found a few videos but I'm broke, and I need more info before I give up dinner for a month.

I see BCA as the Hi-Point of the AR world.

BCA is badass!

I have bear creek. Great company but they are heavy compared to bcm

What triggers are y'all running?

@ChamberOneTactical

2 ай бұрын

We had a mixture of cmc 3 pound, psa custom drop in and mil-spec triggers

I have ordered more than two or three items from BCA, in the past, and have defended their products online. Just called to check on the status of an order for a single barrel due to the delay in shipping. The sales rep said up to 14 days to even ship a single barrel FedEx. When I asked if it would be cheaper to just cancel my order and go to a store and get a barrel, he agreed. $78.00 barrel, $25.00 shipping. and up to 14 days to even ship. I have defended BCA more than once, but now??? I complained, and they now have canceled the order, The barres is no longer in stock amazing. BCA responded that the barrel had gone out of stock after my order,. Imagine that, Isn't it amazing how it went out of stock immediately after i complained, yet not 30 minutes before complained and not an hour after it was still showing available. Imagine that. Oh, and they have refunded my payment, might receive it within the next week. Now that is great customer service if I ever saw it.

@musek5048

18 күн бұрын

man that really sucks to hear, i have also bought a few uppers from them with no issues but lately i've noticed that the biggest complaints about them is their customer service. I've been thinking about grabbing another upper on sale but without reliable backing then they just become an even bigger risk for your time and money.

Got a BC15 side charge a few weeks ago. Took it to the range and it jammed every single time. Tried different ammo and different mags and same thing. About to take it back to the range after breaking it down and cleaning and oiling the crap out of it. Any tips? BC said they mill super tight and to run it wet.

@inthewoods3237

27 күн бұрын

5.56?

@musek5048

18 күн бұрын

my rule of thumb with bca is to avoid any of the oddball offerings they put out like the uncommon caliber uppers and side chargers. they still have a lot kinks to work out on their designs but i'm sure they'll get it mostly right eventually. their rear charging uppers seem pretty solid though, I have three myself and have only had an extractor pin break ($5 fix) on my first one years ago but besides that they work great. I dont ever tell anyone they're the best upper you can buy but for people on a tight budget that just want a chance to be able to dip their toes bca is not too bad.

I have used thier rear charging uppers for years and have shot thousands of rounds without any problems. I bought my first side charging upper (6.5 Grendel) and it failed within 60 rounds. I am not going to invest my time into finding the failure point. I will stick to thier rear charging uppers only for now.

@musek5048

18 күн бұрын

its a good idea but they obviously need to iron out those kinks. their rear chargers are good to go for the most part. but for these super low prices you become the QC lol.

I built a 308 bca with psa lower and after sending back bca 3 times I finally got one that was close enough to fit. No issues now. But might have to grind down to make it fit not much but a little bit went a long way. Budget 10.5 next for a ghetto honey badger😅

@inthewoods3237

27 күн бұрын

308 is rough because there is no “mil spec”

@musek5048

18 күн бұрын

@@inthewoods3237 thats unfortunately the case, although there are a few upper and lower combos that still pair well enough but its always going to be a toss up. I think even PSA states that their lowers may have fitment issues with anything other than their brand uppers which may be purposefully by design but I have seen some people have luck with different pairings online.

I'm glad there are cheap options for those without a huge budget to spend, but only buy BCA if you really have no other choice. BCA's QC is more about "fuck it, ship it out, we'll let customers find the issues" vs "we make sure we get it right the first time." You may get a good one, but the chances of you running into issues is way higher than pretty much any other rifle company.

@johnfowler6189

2 ай бұрын

Very accurate assessment. Although I had a 300blk with an improperly reamed chamber result in an DOOB and that was extremely dangerous. No more bca for me

@inthewoods3237

27 күн бұрын

I’m a lucky feller, 3 and 0 great so far!

It's not a good sign when the guys at BCA are surprised their own guns work....

Some of those are running really gassy. It's a good thing you didn't run them suppressed or you'd induce even more wear on your parts than you already are.

@seang1032

4 ай бұрын

So yes, as long as these bca uppers are in spec and barrel nut, gas block and all hardware torqued properly, these should all work. But it's the inconsistent qc and tolerances that will cause the gun to fail before a better quality rifle. I definitely think it makes a great range toy, but wouldn't ever suggest using it for self defense

@jimgenksxxl

4 ай бұрын

Stop nit picking

@inthewoods3237

27 күн бұрын

I was actually shocked when I got mine and it was gassed great!

Could have made the video in 30 seconds. I like bear creek they are cheap and can be great guns. There done.

Cheap doesn't mean bad and expensive doesn't mean good. Seen a lot of junk of both over the last 50 years. Just try and stay away from MIM (metal injection molded gun parts) when possible. Some companies like Tisas for example in Turkey are getting rid of MIM because of issues.

Torture test needs to happen.

@ChamberOneTactical

2 ай бұрын

Hang in there, we do plan to further put these to the test!

Mlok makes short sections of pic that lock into the mlok slots, works great for attaching pressure pads. Can put the pad wherever there's an mlok section. Super convenient

😉🤌🏻🏴‍☠️

No point using bca when psa is the same price and actually works

@inthewoods3237

27 күн бұрын

Definitely NOT the same price! And have heard many complaints about them as well.

How many illegals are still working at BC? Seems contradictory for a 2A company to employee illegals.

@ChamberOneTactical

2 ай бұрын

Sorry, we are not familiar with that.

@Step-n-Wolf

2 ай бұрын

@@ChamberOneTactical there was a huge TSA bust at their factory. Think they arrested 28 illegals .

Poor Reno May.

@NickTriggers

2 ай бұрын

Reno is about to have a heart attack

@inthewoods3237

27 күн бұрын

Whatever he’s kinda a whine baby

Cheap junk

For a first AR it would be much better to just save up a short bit longer and build a quality AR as opposed to scraping the literal bottom of the barrel and hoping for the best. You can even do your own lay away program. First you catch a PSA complete lower on daily deal for $119, then you grab a Microbest BCG next paycheck, basic Aero upper $370, throw a HS403 on top when you can and a case of ammo now you have a great first rifle (with an optic) for around $800. In the end you will be much better served being diligent with your purchase decisions and having a rifle you can be proud of not just running off to the cheapest easy route you could find. AND BEFORE YOU START YES I KNOW YOUR 7.5" 5.56 BCA SHOOTS 1/4MOA AT 25 YARDS AND HAS NEVER GIVEN YOU ANY PROBLEMS IN THE ONE HUNDRED AND NINETEEN ROUNDS YOU HAVE PUT THROUGH IT.

Complete garbage bought their 450 bushmaster jammed every single shot

@justinmurray4652

4 ай бұрын

What buffer weight and spring did you use for it?

@jimgenksxxl

4 ай бұрын

What mags did you use?

@justinmurray4652

4 ай бұрын

@@jimgenksxxl Good question.I just don't see one jamming every shot without it being something like that.

@jimgenksxxl

4 ай бұрын

@justinmurray4652 I know that 350 legend, 450 bushmaster,and 7.62x39 are very mag specific rounds

@Jgunxl

4 ай бұрын

@@jimgenksxxl might be the problem I bought the mag so long ago from a gun store so I can’t tell you what brand it was I’ll try a different mag and see what happens

I see the peasants of Copium from the land of "JuSt As GuD" have shown up to defend their legacy.

JUNK!!!!!

Definitely trash.😂

Shoot me lights are ridiculous. Don’t bother trying to put one on your gun and you won’t have the switch pad issue. Your welcome.

They used to have a full pic rail on the top, my 16" 7.62x39 has one.

Beautiful Backdrop! 😉 Been trying to get a hold of you guys to ask a couple questions. do you have an email I can use?

@ChamberOneTactical

4 ай бұрын

Chamber.one.tactical@gmail.com

Oh yeah multiple views of many many Bear Creek AND Palmetto State Armory weapons reviews show that they are VERY acceptable quality including PSA Glock clones, AND AK clones as well. I trust my life to these weapons just like as a soldier I trusted my life to a M-16 that had a replacement value (for Uncle Sam) of about ~$150 in 1982 PRIME EXAMPLE kzread.info/dash/bejne/hYmpkreLiNe8YdI.html