I am a quadriplegic and this would be perfect to attach to the back of my wheelchair behind my bookbag 👌😎

@d3m1gawd81

11 ай бұрын

Woah that’s a great idea- like a mini soft armor tank

@EastCoastMan603

11 ай бұрын

Alright guy..Jeez quit flexing on us day walkers. The rest of us aren’t armored vehicles with blasters.☝🏻🧑🏼‍🦽❌🔫🤷🏼‍♂️

@IQWhiteBear

11 ай бұрын

That's great! This is the first thing I thought of while watching this! Perfect for hanging on the back of the chair ♿🔫

@tommccormick9290

11 ай бұрын

This video gave me an idea of what to do with my old kevlar Army vests.

@elsenorloco84

11 ай бұрын

Stop bragging about your pimped out chair rich! Jk that is cool doe

I want the ballistic blankets to line the inside of the door panels of my car. Lightweight and flexible, seems easy to install.

Amazing performance out of a IIIA+ panel! For suggestions, it's awesome this covers the back of the seat, but it would be good to see it sold with a small 6x6"-ish panel to go on the back of a headrest. If a bullet goes through the headrest, that's pretty much Game Over.

I had made something similar and also use US military deltoid armor which panels fits perfectly under the seat covers for the headrests on my Toyota Tacoma . This is needed because of all the road rage incidents with m0r0ns with firearms that here in Houston , TX seems to be a daily event . Also you can put armor panels inside the door panels that does not interfere with the windows . Sounds like an up armored Humvee and sometimes wonder if that is what we need in todays America .

@nobodyspecial1852

11 ай бұрын

The only ones I've looked over much were the current Crye model 3A(newer standards plus VPAM), I think they might stop *one* 5.56 after it deflected off the (now broken) windshield, round two is likely lethal. Pistols and shotguns though, yeah. The Crye crotch flaps are solid and flat paneling, check that out.

@jorgetejada1181

Ай бұрын

You are right

Any chance of a "slick side' option that would be on the front of the seat for Uber / Lyft / Taxi drivers?

@DinoNucci

11 ай бұрын

Take the cover off

Love it, add a head rest cover sold separately

I wish you had done the 5.7x28 or 4.6x30. But I definitely like the idea of that particular armor. Great job! Thank you.

@juanspicywiener

11 ай бұрын

Nigga who carries a mp7

I have thought of this too. Seems logical to have protection if you're being threatened, chased, shot at for being in the wrong place...whatever. Protection for you and your family, while in a car, just hasn't been given enough thought (unless you're a wealthy person that can afford an armor plated vehicle). This product has a larger coverage than hanging your vest over the headrest. Glad you were able to get this produced! Should be in everyone's vehicle.

Brilliant idea. Crazy that it hadn’t been thought of before. I hope you’re getting some royalties!

Make quick clips on it so that you can throw it on and wear it too. I think that would be a total plus to that package. Great idea brother 👍🏻👍🏻 congratulations

I love this! I will be getting this for myself and my wife!

Yes finally I have a Kevlar panel stuffed behind the seat of my pickup truck to do the same job and I've always wondered why somebody didn't invent something like that so awesome

That is a fantastic idea! Big thumbs up for thinking of that.

“✌🏻World Wars ! “ 7:17

The .460 looks like it excited the armor!

That’s sweet! Definitely a very cool!!

That was a great demo and an awesome product! Keep up the good work man!

Wish you all the best of luck with your new biz venture. In this nasty world we live in, anything and everything helps. 👍

Thanks for sharing your experience with us. Great review!

thanks mike! love the channel!

Great idea, Mike.

AZ an officer that was alone was in a shoot out also and was pursued by the suspect as the officer attempted to get away and was struck in the back through his seat as well ... very smart idea.

@Mrgunsngear

11 ай бұрын

Thank you

You are a sick, sick person Scott! Love you man 😂

Nice idea. Thanks for working with Battle Steel to bring us this cool product 👍

@Mrgunsngear

11 ай бұрын

You're welcome 👍🏽

Impressive results

Great idea!

Great job Sir, love the concept.

Cool idea and much needed in this effed up world we live in

Looks like really good stuff! I hate that we're at a place this is necessary. Great presentation

@Mrgunsngear

11 ай бұрын

Thank you

Much better than just hanging your vest on the seat. I love it.

Great idea! Next bank job I pull, this will be on the equipment list.

Wow I have not heard of that event. That's crazy.

Do they make a seat cushion for IED protection? I would totally sit on a 2 inch panel of UHMWPE with some comfy memory foam on top. Edit: also, someone asked about a slick option to actually sit on for taxi/ride share drivers. Prolly a good idea. A slick option in car interior/non tactical colors would be sweet.

Awesome idea

I think this is an awesome idea.

I mean I don't know for certain. But I feel like because it wasn't pressed up against anything and just hanging. It has a better chance of "catching" bullets. Kind of like if you try and punch through even something like paper. Same thing.

Thank you Sir

Mike, I had a unarmored backseat organizer in my last Silverado. I’ve wanted one of these for years! Well done sir! I’d love to see a lightweight Lexan+ballistic security film panel option to add! Maybe do some testing to see which is a better lightweight option between UHMP or lexan with ballistic security film. Again, well done sir!

i didnt know i needed this until now!

Enjoyed the rear overall camera angle.

Just ordered one!

Great idea!!

@Mrgunsngear

11 ай бұрын

Indeed

Cool idea

If I lived in Chicago I would buy a couple of these!

It’s a great idea and very impressive. Now you need to figure out how to keep it from falling off the seat when it’s struck by bullets.

That is friggen cool I want two please thank you mike this is great

Awesome!🔥

Great idea Mike. How about one for bench seating. If we're in a shtf situation im going to get my family and hit the hills. I live in a rural area but my family lives in a urban area. Anyway I want them protected once i get them in my vehicle.

This is amazing I will be saving up so I can get 4 for my SUV for me and my kids

Great idea! Great product. Decent price. U.S.A. is excellent. Many thanks.

@Mrgunsngear

11 ай бұрын

You're welcome 👍🏽

I’m impressed.

@Mrgunsngear

11 ай бұрын

Ditto

I really like it. If I had the cash I'd have them in each car. I just put the soft panels in the back of my seats. Thanks for the discounts on those!

Been wanting something like this!

Thar Sten is f'ing awesome. Now I'm thinking of IIIA full cab panel to go behind rear seat and between cab , also IIIA door panels .

Awesome, I gotta have me 2!

@Mrgunsngear

11 ай бұрын

🇺🇸

Man that’s awesome and yes the memes are great.

I was just thinking of something along the same lines, but just draping the bullet resistant blankets.

ANOTHER GREAT VIDEO!!!!!

I rigged up something similar by taking a MOLLE panel that straps to the back of the seat, and put armor inserts behind it and strapped it down. I put a hook and loop panel on the back of the headrest for a med kit, and also strapped a metal armor plate behind that as well. I like this idea as I had to periodically shift the armor panels as they would eventually slide down. If you get them to make a headrest one too I would get that, and it can be MOLLE like that and we could put hook and loop panels or whatever on there as well, and then you get some head coverage from behind as well. I've also heard of several people being shot at as they drove away from a bad guy before as well, I know there is the video of the Uber driver that got shot through his seat as he booked it away from an attempted robbery. Another one I remember is someone slowing to help a stranded motorist or something similar, and it turned out to be a serial killer that pulled a gun. Guy floored it to drive away but got shot while escaping I believe, and stopped at a house for help, IIRC.

When I travel, I put my backpack with armor in the back of my SUV on the driver's side, standing up just in case. I think this is a great idea, and like you said it can be used as a readily available shield that's in the vehicle.

@Mrgunsngear

11 ай бұрын

thanks for the report

Great product at a decent price!!!

Would be cool to see something in the way of a removable center hole and relief cuts so this could double as a "Pancho" if needed. Might have to add to overall length I suppose. Thx for the video

Impressive.

Pretty cool!

@Mrgunsngear

11 ай бұрын

Ditto

I haven't thought of this until now, but while I have the door cards off of this 92 Chevy to insulate the doors for a speaker install, level IIIA material would be a great material to line the door with!!!

@Mrgunsngear

11 ай бұрын

good sound dampener

some safelite fras is a good have in your trunk kit. something more overt Ive been rolling with the highcom lvl 4s...want to get some adepts or hescos next but highcom lvl 4 is a solid, safe bet. will hold up well against m995 as well

You're not crazy, I've been thinking of something like this for my top less Jeep.

I thought I might be a little off for doing the same. Good to see I'm not nuts.

A couple of these would be helpful if I could hang them from the rear door frames of my crew cab, covering some of the window and down along side of the seat. They would give some protection from small arms fire into the sides of your car (my kids would be in the back seat) if the s hits the fan and we end up driving through a non permissive environment.

@mrgunsngear the only thing I would suggest is the option to expand the system to include a headrest panel.

Just wow! However I noticed the clip coming un-done after single shot. Would this product fail after one shot while mounted on back of seat? Food for thought!

I like it a lot and would love to pick one up. My only recommendation is maybe one that’s less tactical looking for those who like to keep it low key. Maybe just a few admin and map pouches or a cell phone holder for the kids in the back seat.

@Mrgunsngear

11 ай бұрын

Thank you

Stopping 300 blk full power is terrifying. No non-steel non-ceramic armor should do that, even out of an SBR. At least the 7.62 rifle did what it's supposed to lol!!

Idea to share- full armor coverage of back of truck cab, between Cab and bed. Use back up camera instead of inside rear view mirror. Most truck are empty bed and just the driver. Weight penalty is minimal. Top could be used for LED light mount location.

@Mrgunsngear

11 ай бұрын

Thank you

Offer it as a side over the seat cover for seats without a detachable headrest

I bet it stops some of the rifle rounds if the projectile has to go through the steel car first which would slow it down quite a bit

That was impressive. Wish I had some extra coin, I'd pick a pair up right away just to get the patch. 😂

@Mrgunsngear

11 ай бұрын

😁

I think they should add backpack straps to make it mobile in case you dont have your plate carrier for some reason.

I'm ordering the 8" adams arms 300 soon. Can't wait

@Mrgunsngear

11 ай бұрын

nice

@railfanningpoints2.045

11 ай бұрын

SIG Spear LT or PWS is the way to go for piston operation.

Hey Mike, how about level 3 soft panel armor that a average person could remove the door panel of their vehicle and put in the door between the panel and the door inner workings? I think it would be an awesome complement to the seat back panel

How flexible is this? Can this be folded or rolled without compromising the integrity wherein the crease might create an opening? Thank you for the video.

It would be cool to have loops at the bottom so you could bungee it to the base of the seat. Fan of the concept, but not a fan of the lower strap at the front of the seat. I see that as a possible hang point if you have an iwb at 3-4 o’clock.

@Mrgunsngear

11 ай бұрын

thanks for the report

That’s a really cool product. What about backpack straps on the back so you can use them to put the armour in your front when out of the car

@Mrgunsngear

11 ай бұрын

Thank you

MrGuns&Gear, my only suggestion is different colors? I live in a hot climate, would be nice to see a lighter color options? Thanks! 🙏✝️🇺🇸✝️🙏

Still so confused how you don’t have well over a Million subs by now. 🤯

Awesome idea! I would like to see it rated for rifles.

@cigarsgunsandgasoline8032

11 ай бұрын

most road ragers will be small pistol calibers... mainly 9mm & 40's

460 made armor look like a pipi 🤣 and mike was rubbing it like crazy

@Mrgunsngear

11 ай бұрын

😁

Great product. Put that same one against a seat and shoot it again with the 300. Make a bigger footprint available. I was thinking blanket. Can I get 1% for the idea?

Would the panel have stopped a subsonic 300 black out from a 16in barrel?

I seriously want to see hybrid heavy level IV armor with ceramic, polyethylene, and steel. Level III+ has the advantage for back face deformation and ceramic/poly has the advantage for stopping power. Combine them please! I can take the weight.

That dragonfly dodged a ton of rounds

What is the minimum necessary to add behind it to hold 7.62x39 and 556. I wonder if just double it or add steel sheet metal would stop

Doesnt uwhmpe degrade / lose in its protective ability over 120 deg. F most car interiors especially black get well into the 120’s what are the specifications for this?

Great video, would have loved to see a 5.7 just to see if it is all handgun resistant. Possibly if it stopped 300 SS it might stop 5.7?

@Mrgunsngear

11 ай бұрын

it would for sure

Please put this in a car and fire at the car from the back. Curious if the metal in the car will slow or spin the round enough to make this even more effective

Great concept. Would probably get stolen in Memphis.

That is crazy cool idea. Incredibly simple. Will this be on your email list???

@benjaminhuberty5888

11 ай бұрын

I see you have a link under video. Right on!

Like it, one question, all the armor I’v had over the years came with a warning to not store in a vehicle as the heat in a car will degrade the material do you think that is an issue?

@bewbew0016

11 ай бұрын

I think it will be fine. The reason I think this is certain polyethylene backed armor is tested by exposure to extreme temperatures which far exceed a hot car in the summer. If you put it in an oven to those high temperatures, it would degrade the armor. Of course, I can't guarantee anything, as I don't know the specifics of this armor. As far as kevlar (I don't know if this has any, like some other 3A+) it's more resistant to temperature. It's certainly better than not having it there in the event a round hits the seat.

Once again, the difference between 300 blackout and 7.62x39mm is remarkable. Yes, I know there's a significant barrel length difference, but still.

How much longer until YT creates a rso algorithm, just randomly get an elmer fudd pop up during the video that reads "no rapid fire on YT"

@Mrgunsngear

11 ай бұрын

😂