You do have to spend some time setting the saw up... blade, fence, etc. But once done, the saw is great. Fairly compact which is Nice kzread.infoUgkxXh-4_3-ZT1fFWP91ZV7iVqzElr0lEb-a I did get an Incra Miter Gauge which takes some setup as well. The stock miter gauge can be adjusted in the miter slot with a little painter's tape... this tightens up the side to side play a lot.

I first learned about woodworking since the darkest days of lockdown here in the Philippines and have created several very satisfactory projects since then. For a table saw, I have to say the fence is one of the most important parts of a table saw.

Lotus user here. My main concern about the lotus ts is the table itself is not flat. And that cause me to have some imperfect cuts.

when i see this video. i already know that someday this guy would be reach more subscribers. honest review strght to point. hello im from cebu also a woodworker keep safe bru! 🙏

I was almost dead set on getting the Bosch. Thank you for the incredible helpful info and making me think twice.

Thank you so much for the review. I’m so excited to buy one.

Nice video. Very detailed. I wish you could also make a video review for the Stanley SST180.. budget table saw of Stanley.

tHanks I did not expect your verdict on the lotus but points are well explained.

nice but..... you have not discussed motor speed, blade quality, cut timing and build quality which would really bring out the performance of the two

Nalilito na ko hahaha 💪💪

The best review sir..

Nice review po! Pareview nga rin po ung ingco ts15008 table saw nila. Tnx po

Very helpful thanks

Dami ko na encounter na nag kaka problema agad ang motor ng lotus. Sa bosch wala pa

@arnoldnaval8842

2 жыл бұрын

Yah i read a lot of issue of lotus motor.. the only flaw of the bosch is the sliding platform w lotus have.. but i saw one from a foreign carpenter did an addl DIY sliding platform thatbwas attached to the right side

Awesome review!!! 👍👍👍

Thanks 🤝

I still have my lotus TS, it's a good TS, still working love that sliding miter. Loud as hell, reason I bought another TS, but couldn't part with it, go figure.

Well explained. Are these better than Stanley 1801?

Have you mention the grilling function of the Lotus?

Very nice review...

hi sir can you please make a comparison video of these table saw with the Skil jobsite table saw TS6307-00? thank you.

Hope to win that...

Hi, nice review... Is Lotus has band saw?

The moulded switch guard can be 3D printed for the Lotus.😁

@megsman4749

Жыл бұрын

do you have a plan? or where can I get one? Thanksl

Well said po.. Thanks sa clear review and update.. New friend mo po sir from TK. 😊 GOD BLESS ❤️

Review marathon...

Sir, may I ask about the performance of motor?Thanks!

These are brand new items. Which do you think will last longer? Which has a better build, uses better materiasl (i.e. not plastic) especially in the moving parts? Appreciate your thoughts.

Can you do a review on super budget friendly powerhouse table and miter saws? There are hardly any reviews about powerhouse.

Please review Ingco table saw

The sliding platform wins. Sa bosch you need to spend 30+ for to enjoy that feature...

meron ba blade wobble yung Bosch kagaya ng sa Lotus. Correct me if I'm wrong but that would be the difference between an accurate and straight cut vs. a cut na parang circular saw gumawa.

dewalt at lotus pinagpipilian ko sir,mejo nadidismaya ako sa bosch lalo sa gts254

If you add Stanley sst1801 (another budget option) in the scrimmage, which would you choose?

@VincheroKarpintero

2 жыл бұрын

No experience using the Stanley but just based on what I've seen in stores, I'd still go with the Lotus for the amount of features it brings at this price point.

Lotus has micro angle blade adjustment, i don't see this feature in bosch.

Sir, can you make separate video how to calibrate the blade for the lotus. Salamat.

@VincheroKarpintero

2 жыл бұрын

I did. Here: kzread.info/dash/bejne/hpx9w9qtnaW9pdY.html

Lotus ..Pinoy brands Ipagmalaki natin❤️🇵🇭

Hi sir. Where can i buy lotus table saw online?

Sir lotus vs stanley naman

What about the motor power of each?

Quick question sir, you mentioned you used to own that Lotus model. What made you sell it? Would you recommend it for a budget-tied beginner woodworker as a first tablesaw? Thank you for your inputs and god bless!

@VincheroKarpintero

2 жыл бұрын

I actually already owned the DWE7480 when I got the Lotus table saw. I wanted a 220v table saw because my DWE7480 was 110v. I quickly realized that I didn't have room for a 2nd table saw in my small work area so I sold it. Yes, I would recommend the Lotus as a budget option for beginner wood workers.

@orlandogrimaldo5171

2 жыл бұрын

@@VincheroKarpintero sir will you recommend where to buy lotos table saw thanks

Where can I find Lotus table saw because I can´t find it.

sir saan po pwde bumili ng lotus table dto sa manila?

So lotus is the winner..i plan to buy gts 254 but whe i watch your disadvantage between to unit now i was confused about the gts 254..how about gts 10xc..? Can you give me idea which table saw is good with the same price as boscht gts 254..thanks new subscriber

@VincheroKarpintero

2 жыл бұрын

Here's a video on the 4 best table saws in the Philippines as of time of making the video kzread.info/dash/bejne/eXhlvNV-ddabh9I.html

Lotus in my view wins for this comparison

hey bro 😊 me again.. need your help for the 2nd time.. nga pala i got my lotus saw horse and you're right medyo heavy duty feels siya ok na ok sa akin 😊 looking at beginner ts this time.. bosch user here pero parang mas good si lotus dito sa review mo.. ive seen your other 2 videos with regard to lotus.. my heart is with bosch pero "MAS" yata si lotus dito sa battle na to 😊

@VincheroKarpintero

2 жыл бұрын

Yes, between these 2 models, I think you get more value from the Lotus. If you are already a Bosch user, I suggest you look at the 10XC or consider the Dewalt DWE7492. I have a video on that too.

@JT-gq1sm

2 жыл бұрын

@@VincheroKarpintero Thanks bro 😊 will go for the Lotus muna medyo pricey pa yung 10xc.. cheers Man!

@JT-gq1sm

2 жыл бұрын

@@VincheroKarpintero hey bro Happy New Year 😊 me again, with regard to Dewalt TS, very good ba AFTER SALES/SERVICE CENTERS nila dito sa atin? thanks much!

@VincheroKarpintero

2 жыл бұрын

@@JT-gq1sm I'm afraid I can't really comment on how good the service centers are because I've never had to have any of my Dewalt tools serviced. ;)

@JT-gq1sm

2 жыл бұрын

@@VincheroKarpintero nice! any recommendations where to check on Dewalt TS? or san mo nabili yung Dewalt TS mo?

I bought bosch in Slovakia last week and the blade was off few degrees, so not so great Q control from china...

Lotus is the best?

Pwede ba mag lagay dado blades sa lotus?

@janardhanreddy9103

Жыл бұрын

Cost please. Phone number

Ilan ang kapal Ang kaya niya sir?

The Truth to the matter is, it all depends on the woodworkers skills! Tools are operated by the worker...

Palag palag ang lotus. Haha

Lotus wins on this

Sir legit ba ung mga 10k + na price sa mga nagbebenta sa lazada?

@VincheroKarpintero

2 жыл бұрын

Sounds about right

@micc.8780

2 жыл бұрын

Thanks idol. Nagulat kasi ako pumunta ako wilcon kahapon, 20k ung table saw daw. So kala ko di legit si lazada.. thanks sir

Price

@VincheroKarpintero

2 жыл бұрын

...is right!

Now I got it. I just watch the other video where you did a review about the Bosch saw. You were actually paid to put a negative impact on the Bosch brand. Guys don't trust this guy. If you think you want to buy the Bosch brand saw, just go for it. No machines will come perfect.

that bosch is almost 600 bucks. Is that budget?

@VincheroKarpintero

2 жыл бұрын

Are you talking USD? Over here it's USD300 so if it's USD600 over there, I would definitely walk away. The GTS254 is NOT worth $600 in my opinion.

In Reality Bosch 254 is the Winner for the Diy Portable Saw..

@VincheroKarpintero

Жыл бұрын

Realistically, can you elaborate why you say this? 🤔

I bought a gts 254 a few days ago. the worst thing I bought in my life. the entire work table is uneven, of course the saw cannot be adjusted to 90 degrees. the insert plate is terrible, because it cannot be lowered into its space. horror and disappointment in a company like Bosch. and to make things even worse, the explanation of the gentlemen from the service is that it is not covered by the warranty because "it must have fallen", there is no other explanation for the unevenness of the worktop

Not a real review, more of a "First Impression" unboxing video, dapat kasama sa consideration mo is the DURABILITY of the tool. Plus halata naman na Subjective review since Lotus Brand Ambassador ka. Marketing video lang to.

@VincheroKarpintero

2 жыл бұрын

To be clear, I am not under any contract at the moment with Lotus nor am I an ambassador. Unless you know something I don't? Chris, are you my manager? How much is Lotus paying me at bakit di ako naambunan? Chris? Chris? Chris, please, sumagot ka...

@bakitganun7288

2 жыл бұрын

@@VincheroKarpintero I see this as a very objective video. Testing ng durability I think is not possible for power tools. Unless gusto mo ng gimik na ibabagsak mo babasain mo o ganun. Pero this review is very good.

@normangabrielgumba3444

2 жыл бұрын

I own a GTS 254 but dont see any issues here and found the content objective. Not sure why people try to downplay such content and try to paint it as a marketing video where clearly the goal is to help inform 🤔

Bosch malisima