I appreciate this video. Very helpful. Would you share the pdfs of the manuals. Thanks.

really helpful video. have same machine, fan motor no work, plus a hydraulic leak under foot rest. could you send me a copy of the parts and repair manual you mentioned? thanks.

What are the odds of getting that service manual? I have the same unit- awesome machine, just needs a little work.

Mine cranks but wont start. No fuel supply to the 3 individual injection pumps. Just wouldnt start one day. Guess the fuel pump isnt working..

@shovel5180

Ай бұрын

Lift pump $130

@Scubasteve22

Ай бұрын

@@shovel5180 nope. No juice to the shut off solenoid.

what type of hydraulic oil does this machine use?

@AllThingsMech

4 ай бұрын

It's a pretty forgiving system. We used Chevron THF1000 since we had it on hand for all of our other equipment, but any universal tractor hydraulic fluid should work just fine.

Did I miss the cooling fan replacement or did you cover that? I'm currently working on the same machine, ironically, with the same problems. One difference is mine has a backhoe attachment on the front. I really appreciate your video . I'm about to order the rubber hose kit from DK . I was wondering if you ordered a new fan from duetz or just replace it with a 12v parts house fan?

@AllThingsMech

2 жыл бұрын

I ended up replacing the fan off camera. Super simple to swap out - just pull the airbox and piping off to get better access, lift out the battery, and there are four bolts (one at each corner) and the wiring connector. Fan lifts right out. I ended up ordering the Ditch Witch fan directly from them. It was spendy, about $300 as I recall, but it dropped right in and saved me a ton of work. Ditch Witch has a pretty comprehensive parts website thats free to sign up for, and once you log in you can input the serial numbers off of your machines/attachments and pull up schematics, parts lists, etc. and you can order items directly from your closest dealer. Pretty great product support, IMO. Glad you found the video helpful - these are really neat machines that are very versatile. Give me a shout if you have any other questions, happy to help.

@lbaseler

2 жыл бұрын

Great video. I have the same machine with the back hoe up front. Mine seems to burn alot of oil, might need to check the valve adjustment. Also my hydraulics are weak but it might be from water contamination in the hydraulic oil? Idk

@AllThingsMech

2 жыл бұрын

@@lbaseler water contamination would cause the oil to become milky but unless there was a lot of it in the tank, it wouldn't cause functionality issues by itself. If the oil level got too low, it's possible that it caused the pump to cavitate a little and aerate the oil, which would cause sluggishness. I would make sure the oil looks clean and that the tank is full, then slowly cycle each hydraulic function several times to work any trapped air out of the system.

I have a 2310 DD fires won't start

I have the same one. Where is the gear oil located

@AllThingsMech

2 жыл бұрын

The front and rear differentials are the only things on this machine that utilize gear oil to the best of my knowledge. There might some in the drive for the digger, but I'm pretty sure that whole system uses hydraulic oil.