This video is meant to go with Lab 8, and shows some simple measurements on a two resistor circuit using an oscilloscope.
Жүктеу.....
Пікірлер: 11
@shmkrar115310 ай бұрын
Thanks that helped a lot! I never knew that the 2nd probe was connected to the ground
@arutanaferreira40012 жыл бұрын
Hi! Matthew I have one power DC how to measurement , it's not common ground with oscilloscope.
@jw228w6 ай бұрын
thanks for this video.i am trying to make a I-V curve tracer on a breadboard to test the characteristics of various components.i have xy on my scope.i get good voltage on channel placed across my DUT,but I am stumped on getting the current thru the device on channel 2.do you have a video on placement of scope probes on breadboard to measure current thru the DUT? thanks John
@navnitpatil4212 жыл бұрын
What will be the result if we power the circuit with dc power supply or battery instead of function generator?
@Chris-jd9wg
2 жыл бұрын
Yeah! Answer the question, Fairbanks!
@flmdsfr9395
Жыл бұрын
Based on my lab session, just a straight line since it's DC
@nawnaw4709
6 ай бұрын
Straight lines
@jj74qformerlyjailbreak32 жыл бұрын
One day I’ll have a scope that does the math. I’ve got to figure out why I lost channel 2. Well I didn’t, I bought it broke thinking I could fix it. What I didn’t take into consideration first was if I could even find a service manual. Service Manuals life’s Matter. Great Class.
@Chris-jd9wg2 жыл бұрын
I know you won't do it or even respond to this comment (I can tell by the tone in your voice), but try powering with a DC power supply.
Пікірлер: 11
Thanks that helped a lot! I never knew that the 2nd probe was connected to the ground
Hi! Matthew I have one power DC how to measurement , it's not common ground with oscilloscope.
thanks for this video.i am trying to make a I-V curve tracer on a breadboard to test the characteristics of various components.i have xy on my scope.i get good voltage on channel placed across my DUT,but I am stumped on getting the current thru the device on channel 2.do you have a video on placement of scope probes on breadboard to measure current thru the DUT? thanks John
What will be the result if we power the circuit with dc power supply or battery instead of function generator?
@Chris-jd9wg
2 жыл бұрын
Yeah! Answer the question, Fairbanks!
@flmdsfr9395
Жыл бұрын
Based on my lab session, just a straight line since it's DC
@nawnaw4709
6 ай бұрын
Straight lines
One day I’ll have a scope that does the math. I’ve got to figure out why I lost channel 2. Well I didn’t, I bought it broke thinking I could fix it. What I didn’t take into consideration first was if I could even find a service manual. Service Manuals life’s Matter. Great Class.
I know you won't do it or even respond to this comment (I can tell by the tone in your voice), but try powering with a DC power supply.
@wjhjr1415
7 ай бұрын
I can tell by your comment you are a jerk.
@chris47293
6 ай бұрын
Why is this comment so passive aggressive?