The 8 divisions tip is epic

Even after 10 years, You're enlightening budding engineers like us. Kudos to you man!

What a rarity! A KZread video by someone who really knows his electronics theory, clearly explaining what he's showing, and with good audio at a reasonable level. Excellent! :)

@Walter-Montalvo

5 жыл бұрын

Zilog Z80?

@ZilogBob

5 жыл бұрын

@@Walter-Montalvo A little bit of Z80 a long time ago, and much more Z8. Now I've crossed over to the dark side with Microchip PICs. ;)

I'm enjoying your videos, thanks. Another easy measure on the scope is, 0.707 x 7 units = 5 units, useful for 3db points. Actual 4.949, closer than I can see! Edit: Reading my mail 2 years late, to describe how I do this a little better, I set the Volt/Div so the signal is more than 7 units and then adjust the variable knob for 7 units, then I make any external circuit adjustments until the signal drops to 5 units, this is the 3db point.

@w2aew

5 жыл бұрын

Oooh - that is very handy - thanks!

Some of the most clear, to the point and instructional videos I've seen! Wow, keep up the good work! A joy to watch and an effective way to learn some basics.

Great bench technique to pass along to our younger players, & led me back to your "Fast Edge Pulser / TDR" one; which videos earned my subscription. Nostalgia for the many fast pulse edges & TDR work in my misspent youth!

One never gets around to doing back to basics but you have inspired me to do so. Your videos are so enthusing and fun. Keep up the good work. You are an excellent teacher.

Reminds me of the electronics training I received in the US Army (circa 1991), straight and to the point highly effective knowledge transfer! Thank You!

Thank you. Got a new scope and your channel is just gold. :D

I've had the money set aside to buy my first real scope and I've been researching and humming and hawing over this for some time. Watching this finally pushed me over the edge and I made my decision. Just bought a Hantek DSO5202P from Amazon. It has almost everything I wanted, except integration and differentiation. But as it is, this one as $470, which is about $150 more than I planned to spend. I decided it was worth the extra money for a 2 channel scope vs 1 channel. I get the feeling the extra channel will be worth it. My only regret is doing this at 5am when I haven't slept yet. I'm far too excited to sleep now. Listen to me gushing like a school girl with a crush. =D Now for my next dilema, buying a function generator.

@w2aew

4 жыл бұрын

Best of luck and learning with your new scope!

I've seen this explanation a few times so far yours was the simplest good work Sir.

This is the best video on the subject so far. Well done!

Thank you for explaining this in so little time. It really takes a lot of skill!!! I'm watching your video for the first time, and I will definitely try to build the pulse generator. :)

I have to say, I think I've seen most you videos maybe even twice. I really appreciate the effort you've placed with all this content. I accidentally found your channel looking for ESR measurements with oscilloscopes and saw that you have a plethora of info on radio stuff as well. Well I could go on and on... In short, I have to say thank you very much for giving us all these invaluable lessons!

@daver1964

6 жыл бұрын

Heh, me too! More than twice for a couple of them. This channel is a superb resource :)

Thank you. There's loads of "what is an oscilloscope?" videos and loads of TY2603L-Mega reviews, but not so many "things to do with one" vids. Really liking your other vids too.

@Greg-lo1tl

3 жыл бұрын

I agree. Practical application scope videos are harder to come by.

Very nicely done. Thanks... I loved your signal source, and the parallel outputs to make the edge faster...

Thank you for a very informative video and presentation of techniques. I liked it and the best thing was the quality of video and crystal clear voice; rather commentary. You are a good teacher. Thank you.

Thank you for sharing this. Very thorough explanation with formulas. Great presentation. I liked your video.

Your videos are very educational & inspiring. Thank you so much for sharing. Please keep making more videos like this!

Your videos are great, i'm learning so much. Thanks for the all the material and instruction.

Excellent, extremely helpful, very well presented and spoken.

Great lab. What you just demo are is one of the first lab students perform in ac circuits courses. Brings back memories. You shot title your videos engineering lab ;)

Great explanation. Uses a mathod I've never tried before. 👍 One thing that I've noticed is that just about everyone makes the assumption that their viewers already know what units of measurement the formulas will be using when they do the math. But that average neophyte electronics student doesn't know that all the calculations answers will be in units of farads and henrys, or even in ohms. They most likely assume that the units will be in microfarads microhenrys and kilohms. So these units really need to be explicitly stated. Thanks for this useful video.

MORE! MORE!! MORE SIMPLE TESTING AND MEASUREMENT TOOLS FOR DIY: great timeless content like that is worth like GOLD! THANKS A LOT, OM! 73!

Now THIS is really interesting and well presented! You have a new subscriber! Thank you for uploading.

Using 74HC14 (as opposed to 74AC14), I'm getting 5ns rise time with 100nF + 3k3 RC. The squarewave runs at about 5kHz. The rise time seems to be pretty much independent of supply voltage between 2.5V through to 6V. I'm going to try packaging into an Altoids tin with 2xAA Alkaline => 3V supply. Mine's a Texas Instruments manufactured chip. I measured the rise time on my Owon DS7102V 100MHz Chinese scope. Compare this to the 350ns coming out of the scope's own 1kHz square wave probe calibration pins. 74HC14's are super-cheap and readily available in DIP on eBay. Thanks for a great circuit tip! EA5IGC

You want to measure frequently at the zero crossings. It is hard to tell the peak, but the zero crossings are well defined. Also, it is more accurate to make the zero crossings as far apart on the CRT as possible either by adjusting the horizon sweep time or measure the time between a number of crossings and divide accordingly. It goes without saying that these zero crossings should all be the high to low or low too high crossings. Distortions in the wave can make your frequently measurement inaccurate if you measure half cycle times. Excellent video and I love your test fixtures.

watching your videos is a kind of great pleasure...thank you so much

Figuring out unknown variables is alot of fun this way. Thanks!

@w2aew

6 жыл бұрын

Yea - it's kind of like firing up the lawn tractor to mow a tiny patch of grass - a bit overkill on the equipment side, but a lot more fun!!

Can't thank you enough for sharing your knowledge and these educational videos!

thank you for this guide, I used the 1khz test signal from the oscilloscope but worked perfectly.

Your videos are very informative. Just got me a free scope (70s Siemens Oscillar) and your videos are a great help getting started with it. subscribed ;)

Thanks for a great treatment of my scope junction blog! Nice setup; when I do this I just slap-solder the parts together in the air. One point needs comment - for very small capacitors one needs to measure the capacitance of the fixture and the 10:1 scope probe first with the same technique so the probe and fixture capacitance can then be subtracted from the final measured value when the cap under test is added to the RC circuit. The LC circuit is also known as a "tanktwanger" since the effect is so similar to twanging a guitar string.

@w2aew

9 жыл бұрын

Glad you liked it, and good common sense advice of course.

Good, simple video. Thanks for sharing with us.

Thanks for clear instruction and demonstration of this measurement. I was lucky to find a 2467 in January. I need to study the manual better. Very nice functionality.

Great vid, I just found your channel. Will keep viewing.

Such a beautiful oscillation. Thank you.

Simple and effective method . Thank you for sharing .

Great videos, Self teaching EE here.Thanks!

You make this stuff look easy!

Thanks for great contributions. How does the probe capacitor effect or side effect the results? On so datasheets (e.g. sensor ICs) in the test setup section, I saw they mentioned that the probe impedance too.

Nice video, nice clear English with easy talking.

Very interesting video, lots of useful information. Thanks.

Just what I was looking for ! Love your vids. Many thanks :)

Nice one Alan, thanks for this educational video excellently explained again!

Great little video.

Great video. One of the best that I have seen. Now I can measure the C 's that I have to see if the value is as marked, the same for the L's I have. Since I am a retired EE I like to know the value as to how close the value as marked. I suggest that the value for measuring C's I would make the resistor 1% or better. The same applies for the C's to measuring the value L.

@larrybud

Жыл бұрын

You could always measure the resistor so you know the actual value

Excellent contents/presentation, many thanks

You used the rise time measurement for "C", and used the frequency measurement for knowing "L". We can as well use the frequency measurement for determining the "C" as well, when we have a known value of "L". Very resourceful video indeed.

Alan, Thank you very much for the quick answer. I will really appreciate if you can share some quick tips meanwhile video is on the way. Congratulations for your Amazing job and to share all this tips.

Great video!!! Do you know how to measure the inductance "online"? This is when it is loaded, i.e. current flows through it and in the same time the inductance changes (ex. the core varies)? It's difficult but can be extremely useful.

Really informative video thanks. I need to measure some inductors for a induction heater

Great video as always. Thank you!!

So glad you have taken the time to make these very helpful videos for free. It was very well done PH D style great job many thanks 73's wb7qxu

Always great videos.

Always great stuff!

Thankkk youuu alllann!!!! I needed this right now

love your presentations, thanks a lot

Another interesting video. Thanks for sharing.

I love that vintage Hewlett Packard calculator 😃. Take care of those and they will last a lifetime, as you are obviously doing.

This is awesome... Is it ok to use calibration output points on the scope ( most scope have 5V p-p and 1KHZ waveform) for as a fast edge source?

Very good explanation.

Excellent video!

Bro that worked pretty good. Thanks for advice you just saved my hours. 😘

well i found out my function generator uses the max038 chip witch the data sheets said square wave rise and fall for both are 12ns so i guess your circuit would work so i will build it thank you for your help in answering my questions even i majored in electronics in high school i forgot some and guess some things didnt stick because i must not of fully understood either but with your teaching i see it in a whole different light thank you again

Excellent presentation

I really appreciate your very hands-on review of basics! Quite useful. But, I imagine there is some limit to the range of capacitance if your input waveform is set at 5-6KHz.

@w2aew

4 жыл бұрын

The capacitance measurement is made by looking at the risetime of the signal (the RC time constant), so the frequency of the signal really doesn't enter into it, as long as it is low enough to permit the RC circuit to fully settle before the next half cycle.

Great video. Thanks!

Really impressed with your videos. Thanks somm

Very nice presentation - thank you

Always good stuff. Thanks.

Pretty good presentation. In text below here, links to general information can be provided such that others can refer to details too.

Thank you for video (I must watch again)

Thank you for showing this. I've been trying to measure inductance with my scope for some time now, but I could never figure out how to do it correctly.

Very neat and clever .Thanks a lot !

Very interesting. One guy I worked with liked to test diodes with a low voltage 60 Hz signal. He would look at the response with his VOM, I think. I prefer to just measure the resistance both ways with an analog VOM, on the 1k or 10k scale.

THANKS VERY MUCH I ENJOYED ALL YOUR VIDEO.

Clever and useful, thank-you.

I totally agree : ) Great videos man, keep it up!

Best as as always ... thanks for sharing your knowledge to the workd

great video. thanks. Could you tell us how to measure the Q factor, R(ohms),dissipationfactor of a coil on scope please ?

the best results that i've ever had was with the Gregs Electro Blog (i found it on google) without a doubt the most useful info that I've tried.

Very good video!

With your ground free battery operated steep egde pulse generator you can use also the same circuit for the inductor as for the capacitor. It is not necessary to build up a resonator. Also the error is increasing because its much easier to get a tightly tolerated resistor than such capacitor. In the inductor case you just need to clamp your oscilloscope aross the terminals of the resistor to observe the voltage rising, which represents the current rising across the inductor. The math behind is the same.

When a work bench starts to get crowded, a decent calculator [or phone app] makes more sense than a laptop or PC.The 15C is a good model, too

My function generator is on its way, so I had to use the square wave generator on my 475 scope. It worked!

Very helpful. Thank you

Great inspiring video. Thank you ao much for the unvaluable contents and the clear and calm way to explain. A question: may this measurements be done also with the CAL output pin used and available at any scopes instead of the TDR circuit? would be good for measurements on the fly. Thanks again and keep going posting. Greets from Italy

@w2aew

Жыл бұрын

As long as the rising edge of the CAL output pin is substantially faster than the expected RC time constant, then yes.

Thank you, very illuminating.

Hi Alan. I am impressed with your work and the quality of your videos. I am looking for a way to measure complex impedance of a circuit at resonance or in any other frequency using the oscilloscope, is this doable? Thanks , Werner.

At first glance, it seems to work with calibration output of the scope, although there might be some limitations. For example, on my scope, the rising edge of that signal is about 3.5us, therefore if we estimate that the rising time is the required time to go from the 10% up to the 90% of the signal amplitude, that would be about 2.197 times tau. Under those circumstances, if we want to see the complete signal, from 0 to 5 tau, with a 1k resistor, I would be able to estimate the capacitors values from about 1.33nF and up. Overall, there is always a way, but we need to experiment and do some homework to understand what is happening.

Hi Alan- another question: I haven't tried this yet, but I was thinking one way to determine a good rate would be 5 x the RC time constant or so. Yet, I recently came upon this article which uses 10HZ ! which seems unusual to me. What do you think? KZread won't allow to post the webaddress, but you can search on the title which is "Quick Methods for Reliable Component Testing" by Dennis Weller, Agilent Technologies, March 2011 on the evaluationengineering site.

Hi, Alan. Another great video! Thanks for your efforts! Is there any way to add a DC offset to this circuit, to test caps at their working voltage?

@thomasmaughan4798

2 жыл бұрын

Conceptually it is trivial; just put a blocking capacitor from the square wave signal source to the device under test. Then, have a mechanism to not instantly apply the DC (rc time constant; a resistor and filter capacitor feeding the device under test). If you simply switch high voltage on the device under test some of that is going to go through the blocking capacitor into your pulse generator.

Great video.

all info no fluff thanks!

What are those terminal strips that you have soldered to plug in components called? I'm trying to find some online but don't know what to search for. Thanks Edit: Never mind, found out they are called machine pin sockets.

Great, great job Sir...

Instead of the fast pulse generator, can I use a piezo ignitor? Thanks for the very informative videos 👍

I gave you thumbs up. Good video. David Lee

Great presentation as always! I've always been wondering, in an LC tank circuit, if the L and C were not physical components but parasitic L and C which is causing unwanted ringing on the output, what can be done to eliminate the ringing in order to get our clean square wave back?

@thomasmaughan4798

2 жыл бұрын

You cannot entirely get rid of it but if you can get some resistance in there it will reduce the "Q" and quickly damp the ringing. You can sometimes also use clamping diodes.