Banshee axle bearing change Part1 (Table of Contents in description)
Автокөліктер мен көлік құралдары
3:35 removing wheel hubs
4:48 removing slid plate
7:37 removing sprocket
9:35 removing axle lock nuts/sprocket hub
12:47 removing axle
14:54 removing axle bearings from carrier
Пікірлер: 52
Awesome video, no annoying music, no bs. Right to the point, very understandable, thanks.
Great Vid, it's great to see things get stuck and how you got them unstuck. very helpful
Excellent video,really very helpful,you are a great mechanic/technician,Thank you.
Deep well socket works best when trying to drive the axle out and there's no danger of damaging your hub nut
Thanks I was able to get my sprocket off but couldn't get axle out it's stuck. Now I know I just need bigger hammer. Good video!
Great video.....! What I did was take a piece of angle iron about two feet long and drill out holes for the bolt pattern then bolt it up to keep the axle from spinning to remove/tighten the axle nuts. Made it really easy for one person doing the job.
@kevingalindo1
7 жыл бұрын
West Coast Roller right on man, theres all kinda things we can do to to make our jobs easier.
Good Video Brotha Man!
Hey Great Vid!! at 15:41 I paused vid to check out your pedestals , thinking outside the box when space is limited in the shop , I may take the idea and apply it too.
Good vid and remember people all this stuff SHOULD come out easy lol
I made a wrench from steel plate for doing this, works deadly, couldnt find big enough around home
my axle nuts are stuck. cant get the outter one to budge. any suggestions?
how often do you have to change the bearings?
Do you do the same thing for a yamaha Warrior 350
Is the Yamaha warrior in the banshee the same with axle bearings? I’m hearing this a lot
My hubs are rusted on do you know the easiest way for them to come off
If your sprocket hub giggles does that mean your bearings and seals are bad if so where can i purchase them at
Hello. What is the reference of the bearings?
Hey my friend. I had a question. Not sure if you answered it on videos. Watching as we speak. U know the little pins that are on the crank bearings that I'm guessing stop it from going backwards? Where do they go and how important are they? Stock crank. I think??. Lol
i like this channel ;D good job
@kevingalindo1
7 жыл бұрын
Diogo Miranda thank you!
@DiogoM_304
7 жыл бұрын
makes a video to change the bearings of direction and front wheels bearings thks you dude help me a lot
@kevingalindo1
7 жыл бұрын
Diogo Miranda make a what now? front wheel bearings video?
@DiogoM_304
7 жыл бұрын
yes ma friend and bearings direction sorry my english bad
@kevingalindo1
7 жыл бұрын
Diogo Miranda I can do that for ya.
Hello can you help me up need to buy an axle for my 1995 yamaha banshee Where is the best place to buy it Online
Hey man I hope this isn't a stupid question. I just bought a98 banshee . It has a tors delete but the didn't drill and tap new idle screws into the side of the carbs. How do I adjust the idle? Is there a trick? I've also got the thumb throttle adjusted all the way out I can find any screws besides the air fuel screw but no idle screws... please help. Thank you
@breastmeatonly
Жыл бұрын
Nope
Hey Kevin is there any video of changing the shift star? By the way all your videos have been a huge help to me doing a complete frame up banshee build. Keep em coming.
@kevingalindo1
7 жыл бұрын
chris laponte hey bud, not specifically the shift star, but there are plenty videos to get it done. I show how to put it on in this video, if you need to know how to re assy the clutch and kicker gear, I'll post thay link too. kzread.info/dash/bejne/gpyD1pRmZ6fVnZs.html
@kevingalindo1
7 жыл бұрын
chris laponte here's the complete clutch re assy, hope it's a help. kzread.info/dash/bejne/fmSMs8algKual6w.html
what do you do when the sprocket hub won't move at all. I've hit on it for a minute.
What do you do when your axle want knock out. I have hit and banged and it want budge
@kevingalindo1
7 жыл бұрын
Bart Gramling That's the sucky part, you'll have to pull the carrier off the swinger, stand the axle on a wood block and drive the carrier off with a sledge. Hopefully a few licks will knock it off before you hurt the carrier. I had some like that. Beat and beat on it, split board after board, pull it off and do it like a said and it comes right offer after 2 good licks. Makes me wish I hadn't spent all day on it lol
@Bgram14
7 жыл бұрын
South Texas Banshee thanks, that's exactly what I was thinking. Wanted to make sure that was the other option before I went that route.
Kevin. Is it possible to give me cod snap I am having a problem when the gasoline pedal
@kevingalindo1
7 жыл бұрын
نايف الشريف I'm sorry I don't understand your message.
@blakcod1
7 жыл бұрын
Excuse me. Could you give me your snap or insta . +South Texas Banshee
Great content, keep it up. Your subs dont match your content quality.
@kevingalindo1
6 жыл бұрын
thanks man!yea its quite surprising huh?
Can the Axel come out the other way
@kevingalindo1
7 жыл бұрын
Todd Walden No it can't the brake hub only comes off one side of the axle.
@dutyistodd9004
7 жыл бұрын
I can't get the sprocket off and the axle won't move ha e can I get it off
@dutyistodd9004
7 жыл бұрын
I can't get the sprocket off and the axle won't move ha e can I get it off
@kevingalindo1
7 жыл бұрын
Todd Walden Gonna have to use some heat if the sprocket hub is stuck,probably has a lot of rust in the splines. Heat it and beat it man, all you can do.
@dutyistodd9004
7 жыл бұрын
South Texas Banshee ok thanks I'll try it