Great video. Is there a version for the Ford 6.7?

@bankspower

5 жыл бұрын

There sure is! Derringer for the 2017-19 Ford 6.7L is available now with the 2011-16 coming in just a couple of weeks. Call our friends at Thoroughbred!

@anonymousgeorge4321

5 жыл бұрын

@@bankspower --- Thanks, I'll be looking into it.

Just ordered The Derringer and Petal Monster for my 2018 L5P! Can't wait to install it

I can’t wait to install mine.

Best video I have seen on install. Thanks . On that pillar mount. Is there video on that install.?

I have this on my 2019 and empty can run 9.5L per 100kms (25mpg) at a speed of 118 - 124 Kms on the highway. This is worked out numbers not the computer numbers. I also have the S&B Cold air intake on the truck and noticed the throttle response immediately improve. Love the Banks Derringer! Highly recommend

When you pull through the fire wall use a metal coat hanger make a small loop on the end so you don’t stab anything and push it through and tape the wire on the end of it so you can pull it through easy

Excellent tutorial

@thoroughbreddiesel

4 жыл бұрын

Thanks!

Great video and excellent video quality! Thank you!

@thoroughbreddiesel

3 жыл бұрын

YW. Many thanks!

will the sheet metal cut or damage the wire ran between the grommet and metal? seems like an issue waiting to happen?

Does that plug and play kit take govenor off factory settings???

So what do you think comparing this bank to ez lynk, I have a 2017 f450 not sure which I should get.

Is there something out there comparable to this for a 2016 gmc lml duramax

I’ve got a 2019 L5P Duramax and I’ve been considering doing the Ram air box and filter from Banks, the I dash, and the Derringer all at once. But kind of skeptical about it all. I’ve also been considering doing a delete, especially since I know the dpf filter IS a filter and will eventually need to be replaced, a delete costs about the same as a new aftertreatment system does, But after watching this video I think I won’t delete. I think I’ll go after the Banks products and clean the engine up a bit, clean the performance up a bit and maybe “stretch” that dpf service interval out a bit. I work on semis for a living, it’s been my career, and I’ve worked on the aftertreatment systems since they first came out with the egr valves. I think it SUCKS that GM thought it was better to go with a non serviceable type of aftertreatment system. A Cummins system can be split, and the customer has the ability to have their dpf actually cleaned between replacements same goes for the doc and scr catalyst etc. The ones GM uses are all one piece, and when I called the dealership to inquire about their aftertreatment systems they either tell me they are not serviceable or they don’t know. Which is piss poor customer service for a $70k + truck. So my question now is, are there any other Banks products you’d recommend a guy like me should buy besides the air cleaner, I dash and derringer module ? I kind of like the pillar mount for the gauges instead of the suction cups, so probably that. Any ideas or suggestions would be greatly appreciated and thanks in advance.

@thoroughbreddiesel

9 ай бұрын

I like your take on it, and I agree that if OEM’s would consider making the DPF and EGR more serviceable or service friendly, more people would buy in. Its been proven time and again that we can make good power with aftermarket treatment systems in place. I think you are on the right track with what you are thinking of installing from Banks. Good luck!

Check engine light is on once installed. Anything i can do??

Ever have any experience with the SuperChipsFireFly ?

Has anyone had issues with the DPF filters clogging with this tuner?

The only aftermarket power add ons I buy are from Banks power

There is another option Acrylic ruler or a plastic with 30 lb double sided tape wherever you want.

Is all of this available for the 2024 year model and what kind of power is to be expected?

Thanks for the installation guide. Nicely explained. I’m looking to increase fuel efficiency in my 2019 GMC Duramax. I read very positive things about the Banks module in this video. Do you have an opinion on which routes are best for getting the best MPG?

@thoroughbreddiesel

Жыл бұрын

MPG’s really are part of the overall condition of the truck and driving styles. Yes, these chips are designed to increase efficiency in the vehicles so if all the stars align, should result in increased MPG. From our experience, best MPG gains comes from tuning.

Does this work with a 2020?

That Pontiac though

@thoroughbreddiesel

5 жыл бұрын

It's a gem! That was one of our co-workers daughters that needed a tire plugged. Gotta be careful pulling into our shop, never know when the camera is rolling!

Now if we could just get Banks to give us Ram 6.7 owners some love. 😔

@davidanderson8469

2 жыл бұрын

My buddy's waiting with baited breath for one for his 2018 6.7 Cummins.

won't that cut the wire if you go between grommet and metal?

@thoroughbreddiesel

4 жыл бұрын

This grommet wasn’t putting enough pressure on this wire to be concerned with.

Any codes after 50 miles?

Did you add or would you add a Banks or after market cold air box for better air and hp?

@thoroughbreddiesel

4 жыл бұрын

We did not on this truck but for fuel economy and overall performance we always suggest the big three: tuner, air intake, exhaust.

@billgunter3484

4 жыл бұрын

What exhaust would you suggest and from the scr back or something different. Looking for options and suggestions.

@Icutmetal

4 жыл бұрын

Bill Gunter I don’t see how a DPF-back exhaust will add any appreciable performance on these trucks.

@billgunter3484

4 жыл бұрын

@@Icutmetal I agree, so now getting all the components to do a full install. Do you know if the Banks Derringer programmer will work and with it deleted or do I need to look somewhere else? Just got stuck in a parking lot with their system, error codes and would not crank. Finally got it to work and when I took it to my mechanic buddy, no codes showing. Thoughts???

Hey bud, it's been awhile and I was just wondering on an update. If the owner is still happy with the system. I'm thinking of putting that and the pedal monster on my 17 l5P

@thoroughbreddiesel

Жыл бұрын

Owner is still happy. We see him quite a bit as he works out daily at the building next door to us. If he wasn’t happy we would have heard by now.

worried about vibration, but runs wires between the metal of the cab and the grommet ... *shrugs*

@michaelbrady4208

2 жыл бұрын

My exact thought as soon as he said it. Factory grommets are a pain to work into, but it’s why they’re there. Give it a year and the sheet metal is gonna wear through the sheath and ground out the system.

Nice video where is the shop located ?

@thoroughbreddiesel

4 жыл бұрын

Thanks! Winchester, KY

If i add derringer is it legal for smog in California

@thoroughbreddiesel

3 жыл бұрын

You want to make sure that you use a tuner with an EO number in order to pass smog.

Thought this LP5 was rated at 445 horse and 910 torque stock? The dyno numbers with the derringer aren’t much more than stock? Am I missing something? Seems like it’s not worth buying it?

@jonathantrumpower9316

2 жыл бұрын

thats wheel horsepower... Manufacture measures to the crank. Stock numbers to the wheel are much less than advertised.

The most important part of the video is the little connecters and I couldn't see how you dis-connected them 'cause your arm was in the way. Around 3:30'ish.

@thoroughbreddiesel

Жыл бұрын

So sorry about that. We will try to do better in the future.

@cavtj1

Жыл бұрын

@@thoroughbreddiesel No worries TD. Forgive me for being harsh. I was frustrated 'cause I have such an issue with these GM wire connectors. I finally got 'em separated. Thanks.

A year after having this on my truck I have a check engine light. Showing map sensor and fuel pressure sensor code. I’m thinking it’s cause of this banks stuff cause the truck only has 25k miles on it. Regret ever messing with it at all

@thoroughbreddiesel

8 ай бұрын

If you cleared the code out did it come back? Have you removed the module to see if it makes a difference? If it is because of the Banks we will help you resolve the issue.

Can i run it with the pedal monster?

@thoroughbreddiesel

3 жыл бұрын

Yes, this will couple with pedal monster. We have several pedal monster videos.

Does this tuner remove the limiter

@thoroughbreddiesel

2 жыл бұрын

This does not remove any of the limiters set forth from the manufacturer.

What level did you dyno @?

@thoroughbreddiesel

5 жыл бұрын

Highest level. 60 HP

I have seen this product installed in other videos and all of them say you need to access the fps on the side of the motor behind the throttle body. you accessed the fps on the top of the motor. Why is your install different?

@mariosousa4121

3 жыл бұрын

L)

@garysarratt1

2 жыл бұрын

Throttle body?

What happened to Ask Wade?

@thoroughbreddiesel

5 жыл бұрын

Retired.

@genek121973

5 жыл бұрын

@@thoroughbreddiesel Damn...

Jesus. That logo/intro will cause seizures. Otherwise, nice tutorial!

Can I run on level 6 all the time ?

@thoroughbreddiesel

4 жыл бұрын

The Idash monitors several parameters, towing heavy in level 6 wouldn’t be advisable. Consult the Derringer owners manual before installing.

Aka. “We noticed the epa really cracking down 2 months ago and now we are jumping on what gale Banks has been preaching this whole time”

@thoroughbreddiesel

4 жыл бұрын

Or this was the only affordable tuning option available for this truck.....

@Icutmetal

4 жыл бұрын

Cody Clark You can flash tune trucks with fully intact emissions systems...but it sure isn’t cheap on the L5P.

I thought the L5p came with 445 hp and with the banks on the truck you got 465hp . How does that equal a 60hp gain?

@Icutmetal

4 жыл бұрын

David Bowers Do you understand how & why crank horsepower differs from wheel horsepower?

@thoroughbreddiesel

4 жыл бұрын

That's why we do a pre and post dyno run on these types of videos. It show the actual horsepower and the actual increase.

@blythkd9017

3 жыл бұрын

It comes with 445 flywheel horsepower. On the dyno, you're measuring rear wheel HP and torque, that's actual power to the ground. So pre-Derringer, he was getting about 400HP to the ground.

Should a guy be removing the system entirely before taking it to the dealer for service?

@bankspower

4 жыл бұрын

@Cory You have two options. You can either pull the Derringer tuner and engine harness off the truck (which takes less than 10 mins), or you can unplug the OBD-II cable for the iDash/Derringer and everything in place. For most of the dealership out there, they understand that accessories like this are harmless and are completely fine with it. That being said, always check with a service adviser to make sure they don't ding your warranty.

Just know that if you install this tuner in your truck it voids your warranty.

@Zootaco

4 жыл бұрын

Says it’s untraceable and doesn’t void it right on their website?

@kevinlogan2306

2 жыл бұрын

Not if it's installed when you bring it to dealer