I got my BakFlip here: bit.ly/BakFlipTC. Best pricing by about $100 from every other site! 👉👉 6/2024 - QUICK DISCLAIMER: BakFlip is now selling a revised version of this cover, where the rail lowering brackets are now deleted and the bed cover bracket mounts directly to the Toyota Bed Rail making the bed rail basically useless. There's also changes in the smallest panel near the truck cab, as it's now wider making the truck bed access slightly smaller. My installation instruction will now vary depending on which version you received. I'm not sure why BF made this change, but it clearly didn't take the consumer into consideration. 😔

Just put this and the pop n lock on my 2022 Lunar Rock! Love it

@tacomanetwork

16 күн бұрын

Nice! It's probably my favorite item on my truck - I installed the Toyota version of the tailgate lock. Love it, lots of piece of mind and no more fiddling with the key to lock/unlock

Thank you for this video. It helped me so much during the installation of my cover. The instructions that came with it were confusing and lacked a lot to be desired. The only thing I will add is that be sure to install the strap hold down clips before putting the cover on the bed of the truck. It is much easier that way. Thanks again! Much appreciated!

@tacomanetwork

8 ай бұрын

Glad to be of help. Exactly why I made the video - the directions were terrible

Thank you these instructions worked perfectly!

@tacomanetwork

8 ай бұрын

Cool, glad to help! That's the main reason I made the video - all the video instructions I found were terrible or for slightly different trucks/covers

I’m watching this video while deciding what cover is going to be right for me. The ease of this installation amazes me. Initially assumed it was going to be more difficult

@tacomanetwork

7 ай бұрын

Hey! Glad to help with the decision and the install video - that's exactly why I made the video. All other videos I found including the manufacturers were unclear OR were about a slightly different product.

I like the fitment and ease of install on the MX4. This made my decision easier on which one I wanted to buy. I am going to pick up one for my Sport which has a 6ft bed, Thanks Rich...

@tacomanetwork

2 ай бұрын

Nice! Glad to help - I heard that BakFlip might have slightly changed the cover towards the cab now for the 3rd gen models.

Just used your video to install my MX4. Very nice step by step process. Just an added note, make sure when installing the rails that they are straight instead of the rails sagging inward. Install the fasteners that secure the folded panels when 2/3rds folded before putting on the tonneau. Those were a pain to put on with the tonneau on the truck.

@tacomanetwork

10 ай бұрын

Good tips! Thanks for watching

Very helpful instructional learning video sir thank you for your time

@tacomanetwork

7 ай бұрын

Thanks buddy! Glad to help out - it's why I made the video......all other videos were terrible and hard to follow (plus the instructions were really bad)

Good video, the page where you bought it is safe to give you my information, thank you very much.

@tacomanetwork

6 ай бұрын

Yes, TonneauCovered.com are great people a safe and secure site. Give them an email/call for the best price

Video helped me install it. Only problem was the 90 degree weather in Florida making everything too hot to touch.

@tacomanetwork

Ай бұрын

Yeah, it gets the same way here in SoCal! Always have to do a test touch before I lean on the bed!

nice video

@tacomanetwork

5 ай бұрын

Thanks Erin - glad to help

Awesome Video! I'm looking at getting the same one! How's it holding up so far?

@tacomanetwork

10 ай бұрын

It’s changed the way I use my truck for the better! Over all the MX4 is amazing.

nice

@tacomanetwork

11 ай бұрын

Thanks buddy! 😃👍

Nice video - who makes the bike rack? It is a sharp combination. Heading over to Tonneau now...

@tacomanetwork

2 ай бұрын

It's made by 1up: 1up-usa.com/product/2-heavy-duty

Hey just wondering if you know, are the 2nd gen Tacoma covers interchangeable with the 3rd gen if theyre the same bed length?

@tacomanetwork

10 ай бұрын

I checked on www.tonneaucovered.com and there are slightly different model numbers from 2nd gen to 3rd gen. I do believe the bed boxes are very similar though.

Great video. It helped me install my bed cover. Do you have a video for installing the drain system?

@tacomanetwork

9 ай бұрын

Thanks Ryan! I never installed the tubes...and after a few rains and a few car washes, I probably won't. Very little water gets in my bed, so nothing to warrant drilling into my bed further. One precaution is that on the driver side, the existing hole is really close to the gas tank/hoses, so be careful

@ryananderson5498

9 ай бұрын

@@tacomanetwork thank you. One more question, did you install the weather stripping on the bed’s head rail?

@tacomanetwork

9 ай бұрын

No, I didn't feel it needed it.

Will this work with a 2021 tacoma trail edition with the bed storage boxes? I keep watching this vid and staring at my bed and its hard for me to say it would w/o modifying and trimming down those rail hangers provided in the kit.

@tacomanetwork

9 ай бұрын

On BakFlip's site, it specifically says it won't work with the factory bed storage boxes. The MX4 uses brackets to lower the slider rail. You'll likely be able to just lose the rail and modify the brackets OR lose the boxes to make it happen. I'm sure it's possible.

@A.T.TomICBomBr87

9 ай бұрын

@@tacomanetwork thanks for the reply. Since the kit has extra brackets i might try and modify them to clear the top of the boxes. Its a 5ft bed. Having the extra brackets would help with support but its not like im putting weight on top of the cover. Looks like opening the lids clears the underneath the cover but who knows until i try. Big thanks again!

@A.T.TomICBomBr87

9 ай бұрын

Wait. I just watched the vid again it does lower the rail. Youre right. Dang. Haha…back to the planning board.

Nice switchblade! also RIP the tustin hanger!

@tacomanetwork

2 ай бұрын

Thanks! Love that bike - just got some We Are One carbon rims, testing them out this weekend! Yeah, I work right near the hangars....and it's really sad what Tustin let happen

The metal brackets which lower the factory rail are sold separately or are they standard with any mx4 (for example bought off Amazon) I ask because buying in Mexico might mean getting it only from Amazon

@tacomanetwork

3 ай бұрын

They come standard with the MX4 for the Tacoma. There will be enough for either the shortbed or the longbed

can the more forward section fold back too, if you want something higher on that end ?

@tacomanetwork

7 ай бұрын

Yeah, I show it in the video entirely folded up to the cab. Worst case, two thumb nuts and you can remove the cover entirely.

@rpmautoreviews9249

7 ай бұрын

@@tacomanetwork i meant that first section next to cab, can that one fold towards the rear, so you only have an opening there ?

@tacomanetwork

7 ай бұрын

@@rpmautoreviews9249 you would have to remove the two thumb nuts, and it could, but it wasn’t intended like that

Buen video quiero saber si la página donde lo compró es segura para dar mi información gracias por la información

@tacomanetwork

6 ай бұрын

Yes, TonneauCovered.com are great people a safe and secure site. Give them an email/call for the best price

Does anyone know where I can buy the foam block for the header bar mentioned @ 2:25?

@tacomanetwork

5 ай бұрын

Likely direct from Bakflip for any parts. Most resellers don't stock the parts.

@tacomanetwork

5 ай бұрын

You might be able to make your own though maybe weather stripping at a hardware store?

LOL that hangar is a dead giveaway as to whereabouts you live. Tustin MCAS?

@tacomanetwork

10 ай бұрын

Yep, that’s it! Pretty famous place.

@JamesReedy

10 ай бұрын

@@tacomanetwork used to live in Irvine and drove past it on the daily.

@tacomanetwork

10 ай бұрын

@@JamesReedy I work right down the street from here….so cool seeing these building still intact. They’ve been trying to dismantle them for a while….at least one of them.

@JamesReedy

10 ай бұрын

@@tacomanetwork that’s a bummer, I’d have thought they’d be on some historic register. IIRC they held some record for largest free standing wooden structures on Earth. You ever google pics of their purpose? They’d jam multiple blimps in there that were part of the costal defense system that scouted for Japanese submarines during the war. There were other examples either Washington or Oregon but I think they burned down.

@tacomanetwork

10 ай бұрын

@@JamesReedy Just looked it up...they're still owned by the Department of the Navy. 17 stores high, 1000' long and 300' wide. I've worked in the area a while and have actually seen both doors opened and a blimp running into one door, through the hangar and out the other end. They're two of the largest wood building ever built. Rumors a while back was that they were going to implode/tear down the north tower as the roof was collapsing. The Navy fixed it, but it remains closed. the South is still used for events/TV/Movie on occasion.

You didn’t mentioned it so I guess is a no, if I wanted to completely move the cover out the way, how difficult would it be?

@tacomanetwork

Ай бұрын

Like remove the cover completely? That's easy - 1. fold the cover all the way to the cab. 2. unscrew the two thumb nuts on the underside of the cover near the cab. Then, just lift up the cover - it's pretty lightweight being all aluminum.

@javierramos9795

Ай бұрын

@@tacomanetworkthanks!

i’m assuming these are compatible with the new 4th gen tacoma right ?

@tacomanetwork

4 ай бұрын

Big assumption (meaning a lot of money to gamble on). I would contact BakFlip and make sure. I'm sure the bed size is identical, but if the mounting points are slightly off, it might be a big issue

@marvinrodriguez5152

4 ай бұрын

@@tacomanetwork great, thank you!

What bike rack is that?

@tacomanetwork

10 ай бұрын

It’s from 1Up. Best bike rack on the market - all aluminum. No plastic!

I purchased a BakFlip Max 4 years or so ago, and it has not held up well. The plastic housing that contain the release cables have crack; the post that hold the cover in UP position always loosen then fall into the pick up bed. From the start I’ve done all that I can to maintain and “baby” the BakFlip, but still it broke down way before it’s time. I am disappointed in the durability, or lack of, in this product.

@tacomanetwork

16 күн бұрын

Have you contacted BakFlip? They're pretty easy to deal with, especially with replacement parts. I've got to say, I've only used the posts maybe twice so far in a year. I knew going in that the plastic parts would be the issue, so I contacted BakFlip and wanted new plastic corners and the plastic release clip - wanting to just purchase them.....they just sent them for free. This was right after I installed it though

That's a no-go for me. I don't want to drill my bed.

@tacomanetwork

10 ай бұрын

No drilling required - I opted not to install the tubes and my bed has been pretty water tight to date. A few drips get inside when I wash, but that's it

@r.r.hughes9808

10 ай бұрын

@@tacomanetwork Interesting. I live in the Pacific Northwest where it rains 8 months straight.

@Juggernaut-JL

10 ай бұрын

On my 3rd Gen, there are already three small drain holes in the bed at the front of the cab. All you need to do is take a step drill bit and barely go in the hole to widen it.

@westcoastplinkin6559

9 ай бұрын

@@Juggernaut-JL Damn dude, where the hell did you get an access cab off road?!? I would've LOVED to have an access cab off road. I have the double cab which means the 5ft bed. I love the overall length of it and I don't like how long the double cab with the 6ft bed is so I compromised. But the best version is the access cab but I have never seen one here in California.

@Juggernaut-JL

9 ай бұрын

@@westcoastplinkin6559 I was actually wanting a TRD Pro when I went to go buy. They had no DC’s available in our entire area at the time, but the salesman walked me into the back where they get all their newly arrived vehicles cleaned up before sending it out on the lot, and my access cab was there waiting on me to sign papers. You see a few around here in Oklahoma, most are work trucks and receive no love. Mine has found a good home. Throwing a upTOP medium bed rack and a 4x4 Colorado Alto tent on it this month. Also a Cali Raised LED stealth bumper, light bar and Warn 10S Winch. She is looking good. Got er tuned with OTT Tuning, Med/Spicy and it runs great. Are ORAC’s really that uncommon out there?

I ordered this last month and the hardware that came in is different from this video. After my install, i was not able to utilize my bed rail anymore. Very disappointing. I wanted to return but i did not want to pay the shipping and restocking fee. I hope no one gets the same product i received.

@tacomanetwork

2 ай бұрын

I heard that Backflip might have slightly changed the way it mounts toward the cab - someone posted a photo in a FB group. I didn't know about the bed rails though...did they do away with the slide rail dropping brackets?

If someone wants to steal something, is it easy to be pried open?

@tacomanetwork

10 ай бұрын

Sure, anything is possible….but most crimes are ones of opportunity. The aluminum cover provides an amount of deterrent as well as cover for the unknown. I’m good with that. I added the remote tailgate lock as well, so every time I lock my truck, the tailgate locks. Pryability? They'd have to really get in there with a purpose built prybar

I got one and it leak really bad on my Tacoma.

@tacomanetwork

6 ай бұрын

They're not meant to be a waterproof cover. They try, with the seals and the drainage tube (Which I didn't install), but in the end, water will get into any cover

How much pay

@tacomanetwork

6 ай бұрын

Prices may vary now...but $1099

@geovann1973

6 ай бұрын

@@tacomanetwork thanks 🙏

1. Bed Cover 2. Bed Cap 3. Bed Rack 4. Open Bed....which are you??🤔

Just a heads up. This is no longer applicable as I am finding out at this very moment. My new cover is a different installation. Now you don't even move the utility rail. You Mount the adaptor rail to the utility rail.

@tacomanetwork

Ай бұрын

Yeah, I also just found out that BakFlip has changed this. Question: Is the rail still usable? If not, they literally just cheapened the cost of the cover by not including machined brackets to lower the rail. It's kind of a bummer that they're cutting costs and limiting usage of the bed

@MattZiggy

Ай бұрын

@@tacomanetwork nope. Your utility rail is no longer usable with the cleats, or really, anything. Now, you basically bolt the adaptor rail to the stock utility rail, then the rail for the cover stacks on top of the adaptor rail and uses machined clamps to clamp it all on top of each other. Stupid design. (Not to mention, I'm going to be pissed when I accidentally hit my hands on the machines clamps that stick out and it cuts skin! A buddy of mine has the first Gen, if you will, and I went over yesterday. The build on those are far far superior. Not just the way it mounts, the entire cover itself is built better.

@MattZiggy

Ай бұрын

@@tacomanetwork kzread.infoaGGlV3YyAA4

@MattZiggy

Ай бұрын

@@tacomanetwork kzread.infoaGGlV3YyAA4

@tacomanetwork

Ай бұрын

Wow, it's completely different. They really screwed over the consumer/truck user with that cover now. The panel against the truck cab seems larger too - mine was much smaller allowing more bed access with fully open. But the big issue is using the bed rail to mount it rendering the rail now pretty much useless. This brackets are a big hazard too - I remember the lowering brackets being crazy sharp as they don't finish thier aluminum pieces at all. It's a shame, because the actually had a great product, but it looks like they tried to redesign it to save some money. BakFlip is owned by Real Truck now....so I'm sure it's all about the money. Sorry that you got this version....

Made of cheap plastic components that break in a few months. Not worth the money.

@tacomanetwork

28 күн бұрын

The only plastic on this entire cover are the 4 corner pieces that measure 1.5" x 2". I requested an additional set of those from the company and they sent them out, no questions asked. I've had this installed for nearly a year now and haven't had any issued with the cover - even the 4 plastic corners.

@vrva3138

28 күн бұрын

@@tacomanetwork not only the corners but also the clips that holds it when folded. It disintegrates on its own. After I discovered the Diamondback trifold, this product is not worth the money. The corner pieces are important cuz it holds the rubber lining for the entire length. Also, this one leaks more than other brands. They could improve it, but they rarely update the design.

@tacomanetwork

27 күн бұрын

@@vrva3138 I didn't like the Diamond back because of these reasons: 1. the design just looks dated 2. the cover sticks above the bed line. 3. additional weight. I was looking for the most streamlined bedcover, and the MX4 delivers. I could care less about it being watertight...I didn't even install the tubes included. FWIW, backflip just updated the design last month 😁. Enjoy your diamondback and your tacoma. I am enjoying mine.

@vrva3138

27 күн бұрын

The good thing about diamondback is that it accommodates common items like a fill rite fuel tank or a 20 gallon tank upright. (Standard size items will fit). Yes if it's for the looks, flip is great. Enjoy your Flip!