Thanks For The Sound Effects @0:20 Added Realism To The Video! Happy Trails!

Tooth hurty... The dentist's favourite time🤣 Great video thanks

pero porqué no sacas el planetario y cambias rodillos y engrasas como es debido? el palnetario sale con los rodillos

It starts with teeth getting broken on one gear and the dislodged one damage the other ones. So as soon as you hear anything abnormal, vibrations or judder. Stop riding, walk back home, open jt and replace the only broken gear. You will save the gears as well as your motor from getting fused due to overheating. Also use good grade grease after cleaning the old one. These are straight type teethed gear, I got the helical kinda and those gears are very rare to find.

I believe starting in pedal assist 5 rips the gears. My owners manual states to put pas at 1 when you stop to alleviate the spinning

@airforcevoyager

8 ай бұрын

Very true. I put a lot of unnecessary stress on my bike. She's held up pretty good, however I do try to go easy on the throttle, these gears aren't cheap anymore 2023.

For $20, why not just replace the gear assembly? My cysum has also crapped out but the gears are perfect. Maybe the clutch.

@airforcevoyager

8 ай бұрын

That's a great idea! I do today. At the time I made this video I just really enjoyed learning and figuring out solutions to problems. I was a new E-bike owner, plenty of problems to come. Ive learned a lot, but I do prefer just replacing parts now.

awww all my teeth where knocked off the Gears from riding on the Horse Trails thanks for sharing

@airforcevoyager

8 ай бұрын

Your welcome!

You can get metal gears for this motor. If you can confirm that the planetary gears are 36 tooth with an outter diameter or each gear is 47.8mm and the thickness is 13.3mm, and also check that the pins that the planetarys spin on are 58mm center to center, I can get metal planetary gears for both our 750w Bafang motors.

@fraserthomson5766

Жыл бұрын

No! The noise alone would put me off, and these nylon gears are designed to fail before the motor does. Replacement nylon gears are a few bucks.

I think I'm having the same issue. Sounds like a spray can is attached to my wheel

I unlocked my ebike with dual 750w bafang hub drives... i went back to original 25km/h settings... things were way too loud. I think if you want speed who cares but if you would rather longer life im talkinnyears and years just stick to factory settings. Im a 6ft 4in dad bod haha i tow 2 of my kids on a trailer and have one in front on school runs... it does the job... i get to ride with my kids with a spinal fusion and i couldnt be happier. But as an ex diesel mechanic... def just run at slower speeds dont wreck your bike just tongo fast... if thats what you really want with minimal issues over time. Buy a motorcycle

@airforcevoyager

8 ай бұрын

I think I may oneway buy a motorcycle lol. Sorry to hear about your fusion, hope your continuing to do well today, and enjoying your adventures.

I have this same issue. I pulled the motor out and sure enough.. two of the gears are missing a tooth and the third gear is missing two teeth.

How many miles are on the motor? And what kind of grease is good for the plastic gears.

@airforcevoyager

8 ай бұрын

Hey there! Thanks! At the time of making this video I believe it was under 3 thousand miles. The grease I prefer and have never switched is Permatex. It's a White Lithium Grease that resists moisture, prevents against rust, and an overall great lubricant, Oh! and prevents friction and heat. You can find it on Amazon.

@goldengear6125

8 ай бұрын

@@airforcevoyager Okay great! Thanks, I'm new to these bikes and came across your videos. Didn't know the motors needed to be maintained lol. Thank you for your advice, and great work!

@UrDadsFavouriteMaleEscort

5 ай бұрын

Came to say basically the same thing he did. The amazon lithium lube is good stuff.

Where do you get replacement gears for this?

@Wsportys

3 жыл бұрын

These are the original gears.

@joannelightowler8108

2 жыл бұрын

Online

@godofcodgamer8296

2 жыл бұрын

Ali express I got the steel one there

What planetary gear grease would anyone recommend?

@fraserthomson5766

Жыл бұрын

The best is Molykote PG-75 for nylon/steel contact gears. Every 1000miles or 6 months is recommended to disassemble and clean/grease. Your motor should last years and years.

@pauly51

Жыл бұрын

@@fraserthomson5766 thanks for the info. I bought Mobil 28 but haven’t applied it. I’ll look into the Molykote pg 75

@pauly51

Жыл бұрын

@@fraserthomson5766 I can’t find a tube of molykote pg75 to purchase. Any other equivalent you could recommend?

@airforcevoyager

8 ай бұрын

Try Permatex. It's a White Lithium Grease that resists moisture, heat, rust... You can find it on Amazon and I still use it today.

Hey I need that. Same motor

Decent video, you need new grease for that though

Mine are brand new and still make that sound.

You should just order the steel gears for it online.

@godofcodgamer8296

2 жыл бұрын

Those are good? I just ordered it but idk I'm scared break my bike!😰

@sagegelegonya6267

2 жыл бұрын

where did you order them from? thanks!

I don't understand why bafang uses this plastic gears they don't last long at all,,,, they all breaks

@airforcevoyager

3 жыл бұрын

Agreed, I'm running into this problem again 2 months later. I purchased metal gears last night, so stay tuned I will share that and any problems I run into installing.

@spazzman90

3 жыл бұрын

@@airforcevoyager Very cool. I'm curious to hear how the metal gears work for you. Although 13k miles sounds like a reasonable amount of life for a set of those. Thanks for sharing.

@JM-fo1te

3 жыл бұрын

@@airforcevoyager are the metal gears louder?

@tylerseyfert2015

2 жыл бұрын

It’s specifically so they wear out the before the outer housing that laces to your rim does if you think about it it’s way more convenient to replace some plastic gears or just the internals of a motor rather than having it relaced every time there needs to be a replacement

@enyaisrave2831

Жыл бұрын

@@tylerseyfert2015 👏

Factory put too much Grease in there.

I need to buy a puller, gotta change the teeth

@airforcevoyager

8 ай бұрын

A few even taps with a hammer saved me on that bill.

@ianmangham4570

8 ай бұрын

@@airforcevoyager I gotta them off👍🇬🇧

@ianmangham4570

8 ай бұрын

@@airforcevoyager This is by far my favourite ebike motor, I have another with a sinewave controller and she's so quiet I scare people passing by 🤠🤘 ,and my bike with a 36v 10ah battery only weighs 44 Lbs ,I like a light ebike on pedal assist 🇬🇧🤠🤘🙏