Received my 2024 61” Rogue w/Kawasaki FX1000V EFI a week ago. Mowed once already. (5 acres) Thing is a BEAST!

@nickanto

Күн бұрын

How long does it take you to mow 5 acres?

Great mods! Love the cable chute idea! I had the ‘19, 1st yr, Rogue & absolutely LOVED the mower. I had the all the teething pains w/it, I swear it was built on a Friday 13th @ 5pm! I had a great dealer, Cox Implement, they really treated me right. I did trade it for a low hr Ferris. Bad Boy didn’t offer the Vanguard on the ‘23 model, so I tried a Wright Oct ‘23. I wished I’d of just waited on the Rogue? Such a good ride & better machine, in my usage on my various customers terrains. Great vid btw!

Nice work. I "only" have the 60" Maverick and 2.5 acres to deal with. By the time the engine warms up, I'm about finished and sad my time on it is over for another week or month, depending on drought conditions. I bought it a little over a month ago, and I think I need to adjust the transmission rods to sync the speed. Going from a Husqvarna 48" tractor to this thing has been night and day. Speaking of, I may add lights before the sun starts going down earlier.

Thank You! That custom chute you made is awesome! Looking to do something like that myself.

@nelssenhamren2273

2 ай бұрын

I'm here trying to help. A lot of people are relying on videos nowadays to expand their knowledge. And to see people's ideas.

The cooler you installed, where did you get it from? I like the facts that giving extra cooling help with the long term jeopardy for the drive pumps. And thanks for the feed backs.

@nelssenhamren2273

Ай бұрын

There's multiple options on Amazon. Just make sure you get the ones with the 3/8 input.

@missme965

6 күн бұрын

Hey, you mind help me with more information on this cooler? I’m not doing to good finding this cooler on Amazon.Thanks

@missme965

6 күн бұрын

Hey, you mind help me with more information on this cooler? I’m not doing to good finding this cooler on Amazon.Thanks

@missme965

6 күн бұрын

Hey, just found it. I forgot to add the 3/8 input in the search. Only one kind of that type of cooler. Thanks

I have a 23 ROGUE and I absolutely love it !!!?

Same exact mower year and all. Even got the back rack on it. The only issue so far at 150.3 hr mark - the belt tensioner 5/8” grade 8 bolt for the spring tensioner/idler pulley for the drive pumps sheared off at the engine plate - flush with the under side of the engine mounting plate. Not a hard fix but it of course broke at the end of my lane along side of my 40 acre field which is a half mile deep. Had to load up my truck and drag the floor jack out there and some 2x12’s to place the jack on and of course it was 90 degrees out with 90% humidity…. Yeah pure joy!

I bought a 2023 Rough a week ago and I love it !!!

@nelssenhamren2273

2 ай бұрын

I'm really happy with the one I have. I originally was going to buy a super z Hustler hyperdrive. But the ride quality is what won me over on purchasing a bad boy rogue. I've had two hustlers in my career. And they literally cut the same.

I like the cooler system. Vacuum is measured in inches not pounds so 18” of vacuum is a lot? Can you confirm those numbers?

All the customs mods are so cool!

You still have a bad mower. Nice

Did the revolt advance chute system work on the 72” deck or did you have to purchase a revolt control lever and a rogue grass flap kit?

@nelssenhamren2273

2 күн бұрын

@@jimmathieu4194 All you have to do is purchase the revolt cute system. It'll work with the revolt 36-in to 60 in. And it works just fine on a rogue 72. If you have a 61-in deck it works even better.

@jimmathieu4194

2 күн бұрын

@@nelssenhamren2273 what are the compromises for the 72” deck vs the 61” . I have a 72” deck.

@jimmathieu4194

2 күн бұрын

Also , Thank you for your quick reply.

Excellent review and mods. I like th0e heat shield concept as well the grass flap control. Do the newer models have increased Hyd oil capacity and cooling? Did you lock tight your lock nuts? Which is the better mower Ferris or Bad Boy

@nelssenhamren2273

10 күн бұрын

Sorry for responding so late. Thank you for the compliments. Your questions on the hydro and loctite. I did not do any loctite not necessary. The new models do not come with increased hydro capacity. I wish they would. The renegade is the only one that would have a higher volume of hydrofluid. Preference would be my thoughts on your question about Ferris versus bad boy. I guess it depends on if you want to spend more money get a Ferris. If you want to get something that's the same capacity and ride quality get a bad boy.

I just bought a Badboy Rogue w/72 inch cut,EFI Kawasaki motor. I’ve heard issues of very loud muffler exhaust. Is there an after market pipe boot to extend through the hole and 45* angle out on both side? Would a blue color thread lock work for the rear wheel hub issues? What is the real purpose of the mower discharge flapper?

@nelssenhamren2273

Ай бұрын

Regarding your question about the loud exhaust. Let's just say I've had louder! The pipe tips are 1"1/2 flange OD. And they do make multiple versions that will slip over that. Loctite would be a great for keeping the factory nuts that are on it. But just buy a set of lock nuts with a nylon embedded in them. And that'll work just fine for you. The purpose of the cute blocker that is being able to control it gives you the ability to drive anywhere around your property without worrying about the side discharge blowing all over everything. If you do a lot of landscaping for customers it's definitely a necessity.

Thanks for the review. Its sounding like bad boy may not be the same quality as some of your other big names. I guess that's why the price seems to be lower.

@nelssenhamren2273

2 ай бұрын

The manufacturers I've used in the past have all been outstanding. Test of time always tells where the pros and cons are in the build quality of any manufacturer. I've never owned a piece of equipment in any category operate without any problems. I don't criticize bad boy for their shortcuts. Most of the machines I have purchased I've always modified them in some way. This type of outlaw series will have its ups and downs. But the concept I love.

I love an advanced cute

@nelssenhamren2273

2 ай бұрын

The improvement is definitely worth it. A little ingenuity makes a big difference.

Where can I get the back orange plate??

Do the oil coolers stay full and was it hard to get all of the air out of them?

@nelssenhamren2273

2 ай бұрын

Two things you can do about that rear plate. One of the easiest way to do it is to go to your dealer. Two you can go online find the part number order it yourself. The plate is basically there just for extra protection for the big Kohler command engine. As far as your question about the oil coolers being full. The system will prime itself and stay full. as far as air pockets go. When I first started the system it had no problem bleeding all the air out. You can open up the reserve caps and see all the air bubbling through the system. It didn't take but a couple minutes. I had to add fluid three times before everything settled.

@davidwhitehead7760

2 ай бұрын

@@nelssenhamren2273 Thank I have one more question Would it be possible to send me a good picture or two showing how the cooler line are hooked up? I would really like to run some coolers on my Rogue.