“I’m not married to any of this shit. The car is yours to with as you please” Keith is a National Treasure!

Hahaha, the smile on her face as they open the trailer doors is just awesome. She's like a kid in a candy store for the first time. Go Alex.

You are a lucky girl and a hekk of a racedriver. And its nice to hear your sister talk more, not just filming. And she do a good job😊 Awesome family.

I worked for SCTA Speed Week and The Shootout at Bonneville as security for 7 years. I lived in Wendover and loved every minute of those events. The drivers and crews were all amazing people.

Bill at old mans garage is VERY familiar with blow thru carbs on small block chevys.

@lvillelville

2 ай бұрын

Weirdos lol, are an infant ?

I love the picture above your dad's head when you're looking at the block of “Wild Willie” Borsch that brought back memories

Bill with old man’s garage could help you out. He’s building a twin turbo blow through carburetor small block right now he’s a wizard with carburetors he hates fuel injection. He’s the perfect guy for you.

@ericaichinger4768

2 ай бұрын

Was thinking same

@jeffjankiewicz5100

2 ай бұрын

True, Bill knows his carbs, n/a or blow thru, doesn`t matter. Big fan of the family.

@danielhigley8543

2 ай бұрын

You absolutely beat me to this comment! Bill is the man when it comes to blow through tuning.

@chronicburful

2 ай бұрын

I was going to suggest Bill, too. His son Billy's S-10 was a small block, twin turbo with a blow through carburetor for years, and it was fast. Bill is a wizard with a carburetor, and he has a close relationship with ATM carburetor company.

Steve morris has experience with blow through carb race engines .

You definitely want a boost reference fuel pressure regulator. Regardless, if you're using the box or not. When using the smaller hat. You need to add extensions onto your bowl vents, and bent them over, so they are facing the incoming air. Make sure you get your reference from, on top of the carb, not under it. But the blow off valve, needs to be referenced from under the carb, being that's where the vacuum will form first, giving your BOV, the best response time.

Poor Dennis, once again it's " hurry up and get it done" - Alex! Father's day is coming!!! ha 😊😊😊

That is a very very special iconic car with legendary owners. No doubt this is the most recognizable salt flat car in modern history. A opportunity of a lifetime, congratulations

Get a hold of bill hoskinson at the old mans garage, he may have a blow through carb you could use. And he is a carb whisperer.

Watching NHRA and this at the same time. It’s a good day! I hope to see Alex running in a pro class soon🤞

Meg, you and Alex make great videos. I never pass over them. I'm a drag racing fan but I'm supremely interested and fascinated by the Bonneville content, love it. I want to attend speed week.

I really appreciate what a family and friends can get done when time is short. Love your videos and looking forward to more.

Alex your my hero! Can not believe what you have been able to accomplish so fast wishing y’all the best!

Alex Taylor you and your family are awesome people and good luck and be safe and God bless you guys

Bill with old man's garage and SRC channels. Bet could tune it perfectly.

@MarkMiller-nl6ud

2 ай бұрын

Put that ATM carburetor on let him work his magic.

Yes you have to run a boost reference regulator with blow thru carburetor I run a CSU 850cfm on my 427ci SBC that is procharged but I run a MSD 6AL programmable with a msd 3 bar map sensor.

Hmmm... Give Bill Hoskinson Sr. a call? He has a ton of blow through tuning experience as we have all seen. A different race model of course but his 1500HP+ exp cannot be denied.

@teknoaija1762

2 ай бұрын

You need only a full throttle tune and that is easy to tune.Billy went to EFI for reason.

@mitchhuested6244

2 ай бұрын

I was about to tell them the same thing!LOL if he can't do it, he knows who to call....

@curtisfarr9411

2 ай бұрын

Yeah i was coming down here to say they should talk to Nolan to reach out to SRC's old man

@SleeperC10

2 ай бұрын

@@teknoaija1762Billy when to EFI for data logging. Hard to compete these days when using a GoPro for data logging lol. Blow through will absolutely make the power. Many carb guys run EFI systems with carbs for data logging and power management. Old man can get it right but he is too busy building street cars on his channel. He has every old school sbc fan watching him do it too 😂

@AaronSweat-or8ec

2 ай бұрын

​@teknoaija1762 believe the only reason he went efi was for more data and at the moment of the nova build and switching the s10 over he was using the time at hand to further his own knowledge and all the og ppl will know what I mean...... can't deny old man is super knowledgeable with a carb and has plenty of big names to back him

Steve Morris has a hub Dyno!!

Call Bill Hoskinson from “old man’s garage” and ATM carb’s. Bill has been doing Billy’s and it’s well over 1200hp twin turbo setup. I’m sure Nick has there info!

Old man’s garage on KZread is a blow trough carb guru. Small block chevys.

@codyrogers190

2 ай бұрын

Came to say the same thing.. he can make a blow through sbc work

@teknoaija1762

2 ай бұрын

@@codyrogers190 If this carb is any good in the first place.

I’m so stoked for you, Alex. That’s a good car and between those two old guys you got this

i just love it the smile on your face say it all and must i say i really want to see you get a record !

Yep Bill Hoskinson and Steve Morris both have videos on here about blow through carbs.

Let's Go Alex !.. I'll bet Bill from OMG could set up a carb for that car pretty quick..

@teknoaija1762

2 ай бұрын

He never got Billys carb to run right,Billy said the car is undriveable part throttle.

@L.A55

2 ай бұрын

Always one 🙄​@@teknoaija1762

@honeybadgerlsx2204

2 ай бұрын

El oh El Better get Kevin Van Noy at CSU

@teknoaija1762

2 ай бұрын

@@honeybadgerlsx2204 Old man asks Kevin for advice and uses his carbs.It s Kevin ,not old man,who makes blow thrus work.

I can’t wait for your Plymouth to come out in hot wheels within the next month or two! It looks killer! Do you have any to show sneak peeks of?

Dennis/Alex, I recently converted a blow through carb (CSU) to EFI for drag and drive and other applications. It has a dominator base and was on a 555 with an F3-131 Procharger. Probably needs to be rebuilt, but I will donate to the project. If interested, I can provide details

Dennis is a champion fella really like him

You're a very talented person and I enjoy watching you.

Bill hoskinson !!!!!

A shakedown run at an asphalt airforce runway prior to running on the salt to get some idea for the tune?.

steve morris had one on the dyno a short time back

Talk with Steve Morris about smal l block procharged he is on top of building them he built a 372 and made 1022 horsepower on pump gas and 0 degrees of timing and turned boost up to 19psi and put c16 in tank and it made 1143 horsepower on 0 degrees timing.

Steve Morris knows how to tune blow thru carbs. He has a video on him tuning an engine he had built with one years ago.

Thats awesome, I met the Turks and David at the Loring Land Speed event in 09. That car is wicked 23:50

@jacobbarto1699

13 сағат бұрын

Same here in 2010, Keith got me to run on a record class in my Grand National that I believe still stands at Loring even though it was basically stock. Quality people, lots of fun!

Great garage segment, I love bench racing. This should be fun to follow along.

Alex, as you have I've been working on cars since I was a kid yet I still learn something in each of your videos--& they are fun to watch. :)

your buddy Steve Morris was doing some blow though carb

I liked how you walked underneath the wheelie bars that knocked your dad off the skateboard.

@54raceman

2 ай бұрын

They knocked the guy that owns the car down not dennis

Man I was hoping you were gonna go back that is awesome can’t wait to see you get that record!!!!

Steve Morris also builds big blocks procharged.

You might call Westech. With Steve B leaving they may have a blow through carb they will part with.

Love this! Been watching you since you were in your Camaro. And been watching this Camaro since David started driving it at the salt. This is a great collaboration. I can’t wait to see what you do with it.

When do we get to see any update on your "new" shop Alex?

FST has blow through carburetors available

It’s amazing to see a car you’ve seen in Hot Rod Magazine for years and then on Freiberger videos and it ends up at Dennis Taylor Racing for Speed Week preps forAlex Taylor Racing to drive. You just have to love it!! This is going to be an amazing video series! And Keith Turk is such an amazing dude!! That’s going to be a great team!!!

Keith is truly an awesome guy!!

Hey Steve Morris's Sugar ma ma was Twin super charged with blow through carb

Yes! Been waiting for your next run on the flats,Alex. Looking forward to this project and run!

Fuc yeah! One of the very few places that stands the hair up on the back of my neck!

Call fellow KZreadr Bill from old man’s garage. He is a blow through carb enthusiast. And has a wealth of experience with blow through on small block chef.

Awesome , will be fun to watch you ripen it on the salt.. looking forward to it. THX .

You look so adorable in this video young lady, i hope you realize how lucky you are to have a dad like you do , he's so smart and you can see his love for you in every video you put out. Lots of love from pa ❤❤

Perfect Caster effects explanation there. Shopping carts have negative caster, Choppers have positive caster. Positive Caster is essential to 'self-centering'.

@ZIPCORD

2 ай бұрын

That was my understanding regarding shopping carts too. But then I was corrected by someone wiser than me. A shopping cart front wheel has "slip" where the pivot point is not inclined but the wheel is offset set rearward (or could be forward) of the non-inclined pivot. For it to have caster the pivoting bolt holding the front wheel stirrup would have to be inclined. A bicycle fork has slip too when the fork curves forward. But the pivot of the fork below the handlebars (inclined rearward at the top) also has caster too. Most children's tricycles have slip, but no caster and as such they don't (typically) self center.

@PiDsPagePrototypes

2 ай бұрын

@@ZIPCORD The 'Shopping Cart" explantation is the easiest to give, and most commonly used, when explaing to non-engineers, because they've seen how shopping carts wander all over the place, especially over any bump in the floor.

Looking forward to seeing you at speed week again! Praying to the Salt gods for hot dry weather.

Your commentary & your dad's is awesome. Gotta speak about your talk about caster. First road bike I rode for many miles, was a 9 1/2' chopper ridged frame with 47° rake. Riding was riding the 250 rear tire, with 150hp went straight but corners were awesome the more throttle the tighter it went. Was mint, now ride comfy couch 2010 Road king. 😀 Small block from Summit is gonna be mint.

Call Steve Morris on the blow thru.

Hey Alex look up Bob Johnson 55 Chevy Belair Land speed record. He went 202 with a carb in 2013. It's in Hot Rod Mag.

Your arch nemesis Steve Morris has a hub dyno that might help with tuning.

ATM makes a great blow thru carburetor....

luv the video megan hello mika glad to se ya again- nice to see your mom too-dennis thanks for sharing how and why you do a job on anypart of the hot rod- i enjoy why you explain this works or doesnt work whenever your building hot rods. alex and megan crack me up when they film outside of ar.kansas!. also what about a t-shirt design with all of you onthe front-and mika! with somthin like motor maniacs or racing rascals ? yikes i forgot boss lady may not like since she has to deal with the t-shirt orders, etc. to ship out! alex does badradditude still run ? just turned 69 June 1st- l miss the 60s and 70s ! later and GF_HFand SP>-charlie from arkansas- also when racing-run like razorback-LOL

You can break the record if the salt is good for the whole week time is the toughest challenge

Come to north MS and hub dyno at the home of the 300 mph Bonneville Pontiac Trans am.

Steve Morris knows blow thru carb.. gale banks started on blow through carb n gas

Call Street Race Channel!

When the old men get to talking nothing gets done lol😂

@77Sunsetstrip

2 ай бұрын

Lot's of Bull being spread, that's all😂

put the car on a hub dyno to simulate and tune

This is going to be exciting ! Looking forward to it. Thanks for the video.

You’re videos are awesome, they always make me smile. Truly one of the hardest working folks in racing!

Because of conditions at Bonneville, it sounds like: Driving FAST, in slow motion.

Always love your content, thanks for everything you share

Doug's face showing a rollercoaster of emotions haha. priceless

Call the old man from old man’s garage Billy’s truck made big power with a blow through csu

I've wanted to run Bonneville since I was a kid and now I'm 45 and trying to figure out what class or classes I wanna run, I think I've got the car chosen but holy moly is there a bunch of classes and a BIG OL rule book. Can't wait to get started. Good luck y'all

Always fun watching y'all!

You’re dog is so cute and adorable ❤😊❤

Where's the NEW SHOP? Do you still have it, can we see what's going on with it? Why are you not in YOUR SHOP! WAITING !

Well done, my friend! Keep up the good work.

I'm glad to see you chasing the drama

Just adding Bill Hoskinson old man’s garage ATM carburetor can probably help you get it set up if you have all of your critical information

@Alex Taylor good thing you have a friend with a dyno hub Steve Morris to be able to test your set up before you hit the salt flats and Holley's MSD box can do your blow threw carb Good luck!

Talk to ATM Carbs and Bill in Ohio at OMG & SRC he does a lot with carbs on his sons trucks and cars.

Alex you are a very special driver in a very special car ITS YOUR TIME TO SHINE goodluck YOU feel the need THE NEED for speed? should be a shirt for Bonnyville Australia will be watching

😂 you just need a booster seat to see forward 😂

@angushoover8670

2 ай бұрын

Or a periscope.

We want all the shop talk!

Testing is available right there in Arkansas July 3.4.5 with the ECTA in Blytheville, AR. You can go up to 2K in distance and do some carb tuning. Also tuning time available end of June on the salt during g the USFRA Test n Tune weekend, June 28, 29, 30.

Bonneville is a brand new set of skills... IF you can earn that 200mph sticker? (gotta break an existing record to earn it ) look forward to seeing how you guys do... Good Luck!

Skate night! I'm ready. always enjoy the videos! thanks everyone! the best part was your dog when she came running out and said " I hope she brings my dinner out I'm hungry"

Love ur videos and content! You are so awesome and ur family! ❤😊❤

Another good one 👍👍

Well done keep up the awesome work Alex! 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

Then there is the all knowing FIA!

Great content thanks for sharing

2:26 Maybe hang a bright colored material on those bars for the foreigners to your shop.

Alex, I love your use of the word we!

A Samoyed husky I had one who was the sweetest most lovable dog and she would climb the fence and disappear for a couple hours at a time and visit other people

wow i haven't seen this car since hotrod mag in the 90s or early 2000s

Logbook, sounds very aviation related.