I used some of your techniques and my child came out awesome. Thank you!!

@YourGeekFix

3 жыл бұрын

You are Awesome! Well done!

@PantuscoL

3 жыл бұрын

I can send you pics of my version except I didn’t do hair since it’s for my 2 year old niece

@YourGeekFix

3 жыл бұрын

@@PantuscoL Wow, that would be awesome! You can send it to my email you can find here kzread.infoabout Let me know also if it is OK to share in our community section

@PantuscoL

3 жыл бұрын

Just sent :)

@YourGeekFix

3 жыл бұрын

@@PantuscoL It is posted. Thanks again for sharing it.

My mom loves Baby Yoda so much that we bought her one of these dolls for Christmas. The amount of time she spends with it confirms that she loves Baby Yoda more than her own children.

@YourGeekFix

3 жыл бұрын

That is sad and funny!

@Eternal_Satyr

2 жыл бұрын

My wife is the same way. She collects Grogus like there's no tomorrow. Meanwhile, our 16 year old and 22 year old barely ever see her. Which is probably just as well as the alternative. She made a horrible wife. She's turning out to be a horrible mother. ::shrug::

@rosyv5081

Жыл бұрын

@@Eternal_Satyr this is a very strange comment to make. I feel bad for her.

I’d like to see more ‘after’ footage.

@YourGeekFix

3 жыл бұрын

Understood

How disappointing when you stay the whole process just to barely see the final result. I learn a lot though. But I will be gratefull if you can show more angle shots of the final result.

@YourGeekFix

3 жыл бұрын

I am thinking about it. My own facial lighting was also a problem. Too white!

@guambalati

3 жыл бұрын

i agree. yourgeekfix if you read this please add more angle shots, and left/right before and after shots

@did3d523

3 жыл бұрын

he hide the result cause its horrible he ruin his model

@YourGeekFix

3 жыл бұрын

@@did3d523 I will have the person in possession take more.

Before anyone asks. Gold and brown paint with clear enamel is how I did the nails. I cut it out because it didn't fit in well where I had it. I also dusted the outfit with sand colored and tan chalk.

I actually filmed all three, but the video was long and redundant. Also, it seemed like everyo ne else started doing the same videos, so I cutt it down drastically. However I did not have enough video of him to show just the one doll at the end. I may revisit and add back ijn the other dolls or get the current owner to let me get more of the animatronic.

Look forward to seeing everyone there. Let me know if you bought these or modified them.

@alexvickers510

3 жыл бұрын

If I send you my Baby Yoda will you modify him for me please 🙏🏻

@YourGeekFix

3 жыл бұрын

@@alexvickers510 I think you would do a great job!

Very well done! Didn't expect it to look so much better than it was originally.

@YourGeekFix

3 жыл бұрын

Thanks Jimi

Great idea with the poly fill for fluffy hair. I'm doing the same to customise my Mattel 11" plush baby yoda. 👍🏼👽😊

@YourGeekFix

3 жыл бұрын

Awesome!

Absolutely fascinating!!! What an incredible experiment and certainly got my geek fix subscription! I really enjoyed your enthusiasm and the result looked incredible. Very well done and thank you!

@YourGeekFix

3 жыл бұрын

Wow, thank you Mike Shirley! It is nice to have someone like you in our community. Thanks for joining!

Love what you did. It looks great!

@YourGeekFix

3 жыл бұрын

Thanks karen

I have been waiting for a video just like this ever since I got my own. I was literally the person who was going to slap on cotton for hair lol. Thanks for this!

@YourGeekFix

3 жыл бұрын

Sure. You are awesome! Good luck!

wonderful thank you

@YourGeekFix

3 жыл бұрын

Thank you Debbie, you are wonderful for thinking so!

It looks sooo awesome

@YourGeekFix

3 жыл бұрын

You are awesome Jimmy!

Looks great!

@YourGeekFix

3 жыл бұрын

Thanks Blaine

I wish you did a side by side...I mean I have one so I just paused it to really see the difference. But doing a side by side really shows what an amazing job you did!

@YourGeekFix

3 жыл бұрын

Thanks

Your channel is a breath of fresh air I'm about to binge all your old videos so glad I found it

@YourGeekFix

3 жыл бұрын

Awesome! Glad to have you here.

wow the child came back to life after the mod! execellent job!

@YourGeekFix

3 жыл бұрын

Thanks Happy Wanderer

Sips tea

@YourGeekFix

3 жыл бұрын

He could, but there may be sparks after

Wow! So cool!!! Thanks for sharing!

@YourGeekFix

2 жыл бұрын

Thank you

Well done ! Amazing job

@YourGeekFix

3 жыл бұрын

Thanks Belgianred ranger! You are too kind.

Very cool stuff

@YourGeekFix

3 жыл бұрын

You are cool Kevin smith!

Jeez. You know something, I'm glad I discovered your channel, it's epic! Also your working pip-boy was rad! Definitely liking and subscribing!

@YourGeekFix

2 жыл бұрын

Thanks owo! Stay tuned for the third Pipboy video is coming out very soon.

Thank you

@YourGeekFix

2 жыл бұрын

Sure

OMG THATS AWESOME!! End result was amazing!!

@YourGeekFix

2 жыл бұрын

Thanks

@NovaScope

2 жыл бұрын

@@YourGeekFix Your welcome!! I don’t really see why people think this is “bad”, this is really accurate to the real show! Such a improvement.

@YourGeekFix

2 жыл бұрын

@@NovaScope Well thank you again!

C'est incroyable!💚!👍🏼!

@YourGeekFix

3 жыл бұрын

Thanks

Projeto magnífico, ansioso pela estréia Magnificent design, looking forward to debut

@YourGeekFix

3 жыл бұрын

Thanks LOBOI! Look forward to seeing you there

Amazing! You are brilliant! Thank you for sharing this. You are a real artist like me, I totally got you on the mediums used in paint, pencil, hair stuff etc

@YourGeekFix

Жыл бұрын

Thanks Chelle! Best of luck!

I LOVED THIS. SUBBED!

@YourGeekFix

3 жыл бұрын

I love you subbed

Would’ve had loved to have seen more before and after videos at the end but he looks awesome! :))

@YourGeekFix

3 жыл бұрын

Wish now I would've shot more if that one

video starts at 6:59

@YourGeekFix

3 жыл бұрын

The painting does.

incredible how it was finished, congratulations.Greetings from Argentina

@YourGeekFix

3 жыл бұрын

Thanks Nikusher, from the USA. I am unsure of the name of the brand, but they were oil pastels.

@nikusher654

3 жыл бұрын

@@YourGeekFix Yes, I looked for it in my country and I found them. I had edited the comment of the question but congratulations do not have to be missing, good job 🙌🙌🙌

@YourGeekFix

3 жыл бұрын

@@nikusher654 Awesome! Good luck.

Good job. Thanks :)

@YourGeekFix

3 жыл бұрын

Thanks IdolEyes84! You are awesome!

@IdolEyes84

3 жыл бұрын

@@YourGeekFix :)

this is a brilliant video!! I want to try adding some hair and details to my Mattel child thank you!!

@YourGeekFix

3 жыл бұрын

Sure. Good luck!

OMG!!!! I need more after!!!!! Please

@YourGeekFix

3 жыл бұрын

I'll try

I bought a hasbro and turned it into a puppet !

@YourGeekFix

2 жыл бұрын

Awesome!

I can't see so well the after! 😓 But it's so beautiful!!!!

@YourGeekFix

3 жыл бұрын

Thanks Karen

nice! i just reborned one of the mattel ones and was wondering about the hair, i still got some polyfil

@YourGeekFix

2 жыл бұрын

Awesome! Best of luck Harley!

Baby eczema! My son had it! Omg ok i subscribed you're cool! Lol

@YourGeekFix

3 жыл бұрын

Thanks for subbing! My kids did too. Really explains the things he ate this season.

Loving all of the baby yoda content creators are doing! Wow!!! Over on our parrot channel, our male conures are happily co-parenting baby yoda... & it’s adorable! Happy Holidays from Tupeck’s flock! ❤️🎄

@tupecktherappingparrot4345

3 жыл бұрын

They chose his lightsaber. 🥰

@YourGeekFix

3 жыл бұрын

Interesting

The video is great though I tried to paint the ears with my rembrandt pastels and it didn't work. The colors did not mix, they got dirty and the texture was of. Any advice?

@YourGeekFix

2 жыл бұрын

If they are like mine, heating it up slightly should allow you to mix the colors a little bit better. It's hard because those ears are a fine rubber. Remember the inside of the ears is done with morave oil pastel crayon . So adding a little heat with hair dryer helps.

I'm getting ready to destroy my grandpa's couch, gotta get that hair 😂 Thanks for the tutorial! Looks great!

@YourGeekFix

3 жыл бұрын

Thanks. Good luck!

@twisted62380

2 жыл бұрын

🤣🤣🤣🤣

Great Video! Damn Man, You Look like a Young, Adventurous *"Steven King"* I'm Serious.

@YourGeekFix

3 жыл бұрын

Thanks.... I think

@lovebbqnoles367

3 жыл бұрын

@@YourGeekFix Mine Just arrived Today (Hasbro) from Amazon .Its so Cute, 💕Groguuuuuuu💕,..Ah Coo-chi, Coo-chi, Choo!! Baby Yoda, So AMAZING!!💕

@YourGeekFix

3 жыл бұрын

@@lovebbqnoles367 awesome!

Hey there, I was thinking about attempting this myself and following along. Is this easy to perform by an amateur and would this work by using some regular pencils?

@YourGeekFix

3 жыл бұрын

I think so. Several people have, you can read their comments. The key is to do it a little at a time and to take your time. The ears have to be done using the oil crayons. Pensions won't work there. Normal color pencils also may not blend adequately. I did it this way rather than airbrush to make it more accessible to do.

I will try something similar with the basic Mattel version (little beanbag) for the body parts. I am not very good with layering (this is what you do here), but I hope if I take it slow, it will turn out good. I also got a reborn cloth body which I chose to match Grogu's proportions (half legs, will attach some 3D-printed feet I modded myself) and dye to match his body color. I will also get some teddybear modular skeleton (basically ball joints) which you can fully adapt to Grogu's body. Oh, and hair, of course. I have some natural white mohair wool left which I will use. But I will use just glue to attach it, no rooting. I do not think rooting looks that great.

@YourGeekFix

3 жыл бұрын

You can't go wrong Sandra. You will do awesome!

What kind of paint do you use?

@YourGeekFix

2 жыл бұрын

They are described in the video. Start there.

Hah nice credits :)

@YourGeekFix

3 жыл бұрын

I'm glad somebody got it

This is a crazy coincidence, real helpful! Super big coincidence too, as I just bought one of these as a gift and wanted to make it unique. Are you going to also be doing the 11” plush? That one has a vinyl head so you’d be able to do the hair rooting, and I’m interested in how you’d go about doing that. I wonder if you’d be able to use poly fill and a felting needle to do that with.

@YourGeekFix

3 жыл бұрын

Thanks Robert. I initially thought of using my smallest drill bit, which is thinner than a felting needle. Maybe smaller too. The head is still pretty thick. You could push hairs at that point. If you can push, I would probably use nylon doll, or human hair that is blond. You could still mix in poly fill. The key is to start at an inch out and work your way in until it looks right. I don't know if you have access to Stan Winston school videos, they do a great tutorial on hair that is thinner than dolls. Great projects by the way. The Captain America shield looks awesome!

@trebory6

3 жыл бұрын

@@YourGeekFix Thanks for the info! Yeah had been going into some of the weirder parts of KZread to look up Reborn baby doll hair installation. I might practice on the back of Grogu's head to get the hang of it. And thanks! Those are years old, haha I did a stint doing prop design and fabrication in the entertainment industry before transitioning to more corporate art direction with stable work. Check out some of my stuff on the first season of Super Fan Builds!

@YourGeekFix

3 жыл бұрын

@@trebory6 Very cool! My goal with this channel was always to have contact with others who enjoy making and prop building. Have a good one.

What kind of glue for the hair??

@YourGeekFix

Жыл бұрын

These days I would use Nimbafix or spirit gum. Too long ago to remember what I used.

Also rub and buff I had never heard of that.... I was dry brushing it I've been missing out

@YourGeekFix

3 жыл бұрын

Works good

The only thing I saw was 23 minutes of your face and 5 seconds of the actual thing.

@YourGeekFix

3 жыл бұрын

Thanks Alejandro! Technically 8.2 minutes had my face in it.

@aaaaaalowercasescream

3 жыл бұрын

Alejandro that’s kinda mean

@YourGeekFix

3 жыл бұрын

@@aaaaaalowercasescream Not really.

Can Vallejo’s matte varnish airbrush work to seal ? and ty I appreciate your video I look forward creating mines soon 🙂

@YourGeekFix

3 жыл бұрын

I wouldn't do it on the ears. That could stiffen up the rubber.

@Anthony-he3dp

3 жыл бұрын

@@YourGeekFix ty would Alclad 2 lawyer gloss sealer work? Or what would you recommend for the ears and head

@YourGeekFix

3 жыл бұрын

@@Anthony-he3dp Honestly, I wouldn't worry to much about the sealer. What I used is great. It does not dry things out or get hard.

@Anthony-he3dp

3 жыл бұрын

@@YourGeekFix awesome ty so much I’ll go with that thanks you again 🙂

@YourGeekFix

3 жыл бұрын

@@Anthony-he3dp good luck!

It was amazing !! What glue did you use to glue the hair and how is it possible to give that shine to the skin? Please help

@YourGeekFix

3 жыл бұрын

A close up of the glue is given as well as instructions. Gorilla glue.

@rodrigorios1028

3 жыл бұрын

@@YourGeekFix Thanks a lot. New subscriber!

@YourGeekFix

3 жыл бұрын

@@rodrigorios1028 sure. No problem.

This was extremely hard with the plush one

@YourGeekFix

2 жыл бұрын

Seems like it would be easier with the hard ears. Tell me about it and I will try to help.

What sort of glue did you use to stick the hair on?

@YourGeekFix

Жыл бұрын

That was a long time ago. Now, I would use spirit gum or nimbafix

@Chargamer94

Жыл бұрын

@@YourGeekFix Thanks for the reply, I'll try that!

I have never done something like this so I need some help on the items I need to buy Are those just coloured wooden pencils, what brand is that Can you give me all the item names and their respective brands? I know this is annoying request but I really want to do it right

@YourGeekFix

2 жыл бұрын

The pencils were from Wal-Mart. Polyfil from my couch. Also oil pastel crayons. If you watch closely can see brands. I used similar techniques in our how to upgrade figures video.

The Mattel Grogu is 12cm smaller. The original Grogu (from Sideshow, not the Hot Toys Garbage!!!) is 42cm.

@YourGeekFix

2 жыл бұрын

Ok

Can you update all the three dolls? By the way, I have the Hasbro one (only sounds)

@YourGeekFix

3 жыл бұрын

I actually filmed all three, but the video was long and redundant. Also, it seemed like everyo ne else started doing the same videos, so I cutt it down drastically. However I did not have enough video of him to show just the one doll at the end. I may revisit and add back ijn the other dolls or get the current owner to let me get more of the animatronic.

Wow ! You got lucky finding him at the Dollar store . They’re hard to find . The animatronic on sells for $59 and up . The Mattel one I found $20 on Amazon . I find that he looks too lime green plus too pink . I think they should of made him the color he is on film vs the actual color he is . Some has him with so much bright pink on him he looks like he has a bad rash,lol.

@YourGeekFix

3 жыл бұрын

I was corrected. It was family dollar, not dollar general.

Hey man! First off, your video is an absolute godsend; I haven’t been able to find anyone who modified the Hasbro animatronic. Though I do have a few inquiries... So, I don’t have any oil/pastel pencils. But I do have powder pastels sticks and watercolor pencils. I don’t know if you have used watercolor pencils before, but they work pretty well when used on top of Mister Super Clear Sealant. If you’ve used them before, what do you think? Should I just apply the pastel with a small paintbrush, or use the pencils? On the note of sealant, I’m curious what it does to the texture of the ears? Does it still feel somewhat rubbery/fleshy after the sealant? Or is the texture completely different? Also, how durable is it post-modifying? I’ll probably end up bringing this guy along if I cosplay Ahsoka sometime next year (because, why not) and I’d hate for the paint job to get damaged... I also have my three year old brother who loves running around the house with Grogu, and I’m wondering if the modifications could withstand that? Finally, I’m thinking about weathering the cloak a bit... any thoughts? Thanks again!

@YourGeekFix

3 жыл бұрын

Don't get wrapped up into pencil type. You could use a lot of options for the color. The process still works with layers. Most color types can be blended and wiped off. This is true for the plastic. The rubber is a different story. I used oils on th4e ears because pencil will not stick or blend as well. With water color pencils, very little dampness is needed for the blending process. The clear sealer, dull, will not bother the ears or dry them out. I had the luxury of being able to test on the cheep baby Yoda first, but not necessary. The biggest thing to remember is you can always fix paint. Be most careful with the glue on the ears. It will not come off. If you take your time and keep tweaking textures and colors until you feel good, it will look awesome! You will do great Sophia! One step at a time, experiment, and have fun!

@YourGeekFix

3 жыл бұрын

For cosplay, the animatronics' ears are fragile. He was made for kids, but I think safest to be put in one spot. I think the bigger doll may be a better one for cosplay. It is possible, ifg you make the carry bag and kept him on your chest ajd were careful, that he could survive and make it easier to walk around for long periods of time.

@sophiabills6213

3 жыл бұрын

@@YourGeekFix Thank you so much for the advice! Can’t wait to get started!

@YourGeekFix

3 жыл бұрын

@@sophiabills6213 good luck Sophia!

The face shading - are those oil pastel pencils?

@YourGeekFix

3 жыл бұрын

Yes.

@nightviolet

3 жыл бұрын

@@YourGeekFix thanks :) he is absolutely adorable and i love your mods!

@YourGeekFix

3 жыл бұрын

@@nightviolet Why thank you nightviolet! I appreciate you watching and interest in our projects. Stay tuned.

I am back

@YourGeekFix

3 жыл бұрын

Welcome back

I liked the valt teck 5000 thimg you put on your arm i liked that video the best

@YourGeekFix

3 жыл бұрын

Thanks

@TheDisappointedKenobi

3 жыл бұрын

Your welcome :D

@TheDisappointedKenobi

3 жыл бұрын

I would like to meet you in person

@YourGeekFix

3 жыл бұрын

@@TheDisappointedKenobi Maybe we will be going to comicons again soon. You could always say hi there.

Btw baby yodars Real name is gogoo

@YourGeekFix

3 жыл бұрын

I thought it was grogu?

But the final result? Just 3 seconds really? -_-

@YourGeekFix

3 жыл бұрын

Cut down dramatically after editing out an awkward joke about midichlorians.

@YourGeekFix

3 жыл бұрын

Was initially about updating all three dolls. Last second I removed the others.

0:41 thumbs down to canceling the Amazon card if you’re someone already subscribed to Amazon prime. Using their card to make purchases saves you 5% on anything you purchase in the form of points which you can redeem for cash back to either your account balance or direct cash payment into your checking account which is what I exclusively do. Top tip: It will also give you the option of using points towards purchasing but never do that or use them in any other way than redeeming for cash as stated above.

@YourGeekFix

3 жыл бұрын

Yeah, I have no debt and feel tguilty about encouraging people to get a credit card for a $60 toy, especially at a 26.9 percent Apr. I probably shouldn't talk negative about a group I am affiliated with.

@YourGeekFix

3 жыл бұрын

Thanks

I’m having some major problems with the ear color. I’m not loving how it’s turning out. It’s rather bumpy and not smooth. Do I need to use something rather than my finger to smooth out the oil pastels? Also, do I spray the ears with the matte sealer after the color is right? I just want to make sure the sealer won’t crack after time. Thanks a bunch!

@YourGeekFix

3 жыл бұрын

Are you using the crayon type? In my climate they go on pretty smooth, but don't use to much or too thick. I also used zeis wipes. TAKE YOUR TIME! Do it in small potions.

@jrad326

3 жыл бұрын

@@YourGeekFix Thank you so much! Giving this a go tomorrow when I’m fresh. Bought the wipes. Do I use these wipes to blend all the colors together at the end, or after each single color is layered on?

@jrad326

3 жыл бұрын

@@YourGeekFix And also the oil pastels I am using are Pentel Arts. They are crayons. I think I was attempting to apply too much for sure. I wiped it off best I can. So here’s to a fresh start tomorrow!

@YourGeekFix

3 жыл бұрын

Good luck. Try putting on one line and use the wipe to transition

@YourGeekFix

3 жыл бұрын

Good luck

Best result by far on youtube. Imho you can add some more hairs and then cut it just to make them a little bit more regular! Can you add a new video with more seconds of the result? :)

@YourGeekFix

3 жыл бұрын

I have thought about it. Have to get him back first

Below

@YourGeekFix

3 жыл бұрын

Below?

Baby yoda himself is full of polyfill

@YourGeekFix

3 жыл бұрын

I think at least one of them is.

Ya lo hizo Zprops men

@YourGeekFix

3 жыл бұрын

Chevere

Ok

@YourGeekFix

2 жыл бұрын

You are awesome!

You need way more final product shots

@YourGeekFix

3 жыл бұрын

Yeah. I can post more in the community area

@benfitzgerald7384

3 жыл бұрын

@@YourGeekFix .

@YourGeekFix

3 жыл бұрын

@@benfitzgerald7384 Yes. You tube.

Nice work.. do you offer this as a service? =D

@YourGeekFix

3 жыл бұрын

Sorry, no. But I believe you would do a great job at it. This is a good opportunity to practice.

@stevetb7777

3 жыл бұрын

@@YourGeekFix You are too kind. I can't draw stick figures. =D

@YourGeekFix

3 жыл бұрын

I think you shoulds still take a stab at it.

What type of colored pencils, fabulous job!’

@YourGeekFix

3 жыл бұрын

When I do these videos, I pick the cheapest most accessible materials. I would otherwise typically airbrush this. So, the pencils are a cheep set from Walmart. However, you could equally use any you can get. Or go with more expensive oil pastels or water color pencils. Keep in mind, for the animatronic you will need to avoid pencils on the ears. Use the crayon style or paint on the color. That will avoid the rubber from drying out. I tried to find my set to post a link, but could not find it. One step at a time, experiment, and have fun! You will do great Peggy!

@electric_kool-aid

3 жыл бұрын

@@YourGeekFix Can you explain about the ears? I planned on using makeup and color pencils but the ears are a rubber material. How you you apply such colors on the ears. I know it was in the video but I'm still figuring out how to paint the ears efficiently.

@YourGeekFix

3 жыл бұрын

@@electric_kool-aid so, I used the oils that are like crayons and Zeiss wipes. Take your time and only put on lightly and blend using the wipes.

@electric_kool-aid

3 жыл бұрын

@@YourGeekFix And the glue used for the head? Do I need to be careful about what glue I use on the head? I have the animatronic so its more of a plastic.

@YourGeekFix

3 жыл бұрын

@@electric_kool-aid be VERY careful. I dipped the tips of the hair. Let it sit for a minute before putting it on. It will stick better. Use very little or it will drop and be hard to remove. Spirit glue is the safest and easiest.

Did you use color pencil

@YourGeekFix

3 жыл бұрын

A combination of oil and pastel pencils.

@BettyWapp

3 жыл бұрын

@@YourGeekFix can I ask what brand of oils and pencils?

@YourGeekFix

3 жыл бұрын

@@BettyWapp Pretty generic. oil and pastel pencils and old pastel crayons

There’s baby yoda stuff at the Dollar General?!

@YourGeekFix

3 жыл бұрын

It turned out to be family dollar, but yes.

6 minutes left eeeeeee

@YourGeekFix

3 жыл бұрын

That is good excitement. You are awesome!

Amazing work ! Do you take commissions? I would gladly pay you to make my animatronic look like that! Great video 💛

@YourGeekFix

3 жыл бұрын

This comes up a lot. I don't. At least I haven't yet. I could have made thousands with pipboy mods, and maybe someday will change my mind. I mostly do this to encourage others to get into making and modding. I used pensils so others could do the same. Practice on a different toy if you have to. Good luck Ariane! You can do it!

@arianegauthier6021

3 жыл бұрын

Thanks for answering ! I might just get over my fear of messing up and buy the supplies to try it out one day! Keep up the great content and have a good day!! ☺️

@YourGeekFix

3 жыл бұрын

@@arianegauthier6021 tjanks

looks better stock

@YourGeekFix

3 жыл бұрын

Well, it does come that way.

Why not use Mr. Super clear?

@YourGeekFix

3 жыл бұрын

Ok

Please make over Mattel plushie (bean bag)🙏🏼🙏🏼🙏🏼

@YourGeekFix

3 жыл бұрын

Did you buy that one? I had all three, but the video was a bit long. Since people have done the same thing I did with an internal armature, but I used a grip camera mount. The same principles apply. If you have the tools and feel comfortable, use an airbrush on that one. This video was to show the most approachable method.

@kamil.p5134

3 жыл бұрын

@@YourGeekFix Yes i did

@kamil.p5134

3 жыл бұрын

@@YourGeekFix But ok, I get it

@YourGeekFix

3 жыл бұрын

@@kamil.p5134 cool!

@YourGeekFix

3 жыл бұрын

@@kamil.p5134 if you upgrade it, share it on! Look forward to hearing about it.

How much would you charge to do mine

@YourGeekFix

3 жыл бұрын

Too much to be worth it to you. I believe you can do it Lloyd

@lloydjohnson1071

3 жыл бұрын

@@YourGeekFix Is it more than dool cost can you give a number

@YourGeekFix

3 жыл бұрын

@@lloydjohnson1071 the hourly cost of a physician would be way more than would be reasonable.

I have done a lot of mods I'm looking forward to try these :)

@YourGeekFix

3 жыл бұрын

Awesome!

Did I miss something or you actually didn't want to show the final result?

@YourGeekFix

3 жыл бұрын

You missed about 40 minutes of footage. I filmed all three being modded and then cut two. By that point I was just happy to be done with editing and didn't refilm an ending to have more. I have a lot of photos and less video. It's nice to know people wanted more and weren't burnt out at the end. I may do another video with the footage if there really is interest.

@nicolastable6212

3 жыл бұрын

@@YourGeekFix I think you could use this example for next time. I liked your work but it cannot be appreciated as it should be. I mean, 40 minutes of working process does not match, like, 5 seconds of one final result frame? Just sayin' kzread.info/dash/bejne/fH-pyLBrnpPbmJc.html

I liked the before better

@YourGeekFix

Жыл бұрын

Ok. Thanks for watching either way Summer.

Ok Lol!

@YourGeekFix

3 жыл бұрын

LOL

Loved it also first

@YourGeekFix

3 жыл бұрын

Did you already see it?

@TheDisappointedKenobi

3 жыл бұрын

Yes

@TheDisappointedKenobi

3 жыл бұрын

He Used Valt Teck Hacks To See It Already

@YourGeekFix

3 жыл бұрын

@@TheDisappointedKenobi Wow

@YourGeekFix

3 жыл бұрын

@@TheDisappointedKenobi Ah

In Mexico City the cost for a baby yoda start at $130. Wich is an entire months salary. Can not believe they sell Baby Yoda's for $10 in the U.S :( I really want one 😔

@YourGeekFix

3 жыл бұрын

Come get one

Hi

@YourGeekFix

2 жыл бұрын

Hello Phillip!

Am I the only one surprised he got the talking plush for only $10?

@YourGeekFix

3 жыл бұрын

How much is it regularly?

@kingofallslime1159

3 жыл бұрын

Your Geek Fix it goes for around $25 and the Mattel goes for around $18-$20

@kingofallslime1159

3 жыл бұрын

I don’t wanna buy it until it’s on sale or the price is at about 15-20 dollars which is a more reasonable price for me But I do have the Mattel

@YourGeekFix

3 жыл бұрын

@@kingofallslime1159 got mine at family dollar. I said dollar general.

@moet3121

3 жыл бұрын

@@YourGeekFix went out to check right away after reading your comment, and it's 25😢

Would you be willing to paint mine? It’s terrific! Please let me know if I can hire you. 😃

@YourGeekFix

3 жыл бұрын

You are nice, but no. I believe you will do a great job.

I haven received my baby Yoda in the mail yet

@YourGeekFix

3 жыл бұрын

That is sad

10 USD??? Here in Spain the Mattel Baby Yoda costs almost 30€!!!!

@YourGeekFix

3 жыл бұрын

Whoa!

What’s your name

@YourGeekFix

2 жыл бұрын

Jeromy

I wish we see more of the doll instead of his face🙁

@YourGeekFix

3 жыл бұрын

I won't take it personal

Subtitles in Spanish Please 👍🏻👍🏻👍🏻👍🏻👍🏻❤

@YourGeekFix

3 жыл бұрын

Bueno.

You look like the guy from toy story fixing Woody

@YourGeekFix

3 жыл бұрын

The 90 year old guy? Thanks.

That's not true. The not animatronic plush stands up very easily!

@YourGeekFix

2 жыл бұрын

Good job! Mine is too rounded.

“That will go away when we use of of our SPECIAL treatments.”

@YourGeekFix

3 жыл бұрын

True!