AXIAL SCX10 - PROJECT BULLET PHASE 1 FRONT AXLE
Ойын-сауық
This is my build series on the Axial Scx10 Platform. In this video I assemble the front axles. Enjoy the video my friends and thanks for watching!
iROCK STUDIOS LLC
PO BOX 5053
KAILUA KONA HI, 96745
iROCK™ RC/ iROCK™ Studios © 2014 iROCK STUDIOS LLC. All rights reserved. Publication, reproduction or distribution of this film by any means whatsoever - including without limitation electronic transmission via internet or e-mail, or re-uploading existing videos & re-uploading such material on any website anywhere in the world - is strictly prohibited without the prior written consent of iROCK Studios LLC. iROCK Studios LLC is not liable for any damage or loss through the use of products or techniques shown - Use at your own risk! This film and the iROCK RC film series broadcast on KZread is intended for entertainment purposes only.
Пікірлер: 128
Man, I dreamed about stuff like this when I was a kid.
Very nice looking axle upgrades
Gorgeous
Nice upgrades thumbs up
Wow! Thanks man for such excellent mechanical engineering!
Great work, the parts in this...I can't even talk :) mesmerizing! !
now that is a monster axle wow well done my friend have fun rcing
Cool! 👍👍👍
It is a work of art iROCK!
@irockrc
9 жыл бұрын
Thank you BANTAM53!BANTAM53
@BANTAM53
9 жыл бұрын
NP iROCK! One day I will have those axles myself :-D
Hey iROCK! Great video as always, Great attention to detail in this build. Thanks for sharing and happy building bud!
That thing's a work of art!
@treemanlee07
8 жыл бұрын
Bet it costs a small fortune too
@IllusionSector
3 жыл бұрын
@@treemanlee07 It will Vanquish my credit card.
Looks like some fun right their cool build video cant wait to see the hole thing up and running
Nice Upgrades!Thumbs up!
Great build, excellent construction! That's gonna be a beast! MIDWID!
@irockrc
9 жыл бұрын
Thanks a ton Bro!BlackSmith RC
@rccross7906
2 жыл бұрын
@@irockrc J
Woow it's very very interesting indeed...i really enjoyed watching thanks for this video
Nice! I see you had the same with your Vanquish locker, I had a hard time getting that bearing on that thing lol Got too love then Vanquish Currie axel's! Have them on my Deadbolt, only mine are black! Silver look's good too!
Thats a searous upgrade dude,liked.
Excellent work👍👍👍
Very Very Nice Axles, i love them ! one day ill have a set under my jeep. !!
And yet again a great video bud, love them axials would like to get some at some point, cant wait to see the rest of the build Happy bashing
Great video, killer axle!
@irockrc
9 жыл бұрын
Thanks a ton Bro!clockwoood
Thanks for the video, you are a creative thousand thousand thanks
That's looks sick!! Be prepared to get a lot of questions from me when I get a SCX10! Infact, I'm going to create a playlist starting with this video!!
looks like good quality stuff man , liked
That has to be the most amazing axle ever dreamed up, especially the replaceable scuff - guard to protect the bottom of the housing. You truly have OCD my friend and its beautiful :-)
sweet axle ! nice vid
This is very very cool damn!!!!
Nice stuff! But you forgot to add threadlock to some of the screws.
Nice 👌
Wow
Dang. That axle is sick. Liked. =]
แจ๊วดีจังนะนะจ๊ะ ชอบๆๆ
Hi iRock.... thats very insane build... im now interested to scx10 and VP. ;) want to build my self a real crawler this time.... thanks for a nice videos always....
That is a serious looking axle and diff my friend...You are still the master of the build vids mate!
@irockrc
9 жыл бұрын
I try my best Jax. Build vids are not that easy but I enjoy doing them. Thanks for watching!Jax Teller WA
super!
10. Parabéns.
nice :) vanquish is best :P looks awesome :) Great video as always :)
awesome
That whole assembly is just screaming- You’ll Destroy Your Truck before you Break Me! ... Nice!
Muito legal,gostei.
Isso sim
Nice!
very cool man looks really sweet to
@javiernajera8922
6 жыл бұрын
Muy bonito y buena calidad en materiales. Un lujo,,,,, pero... ¿¿ y el diferencial......??? Donde está?? Vaya chasco. Me ha decepcionado .
im so envious those are the best looking axles on the market... Simply beautiful mate !!! cant wait to see what there going under !!
Wow this axle is huge. Any links on this product where to buy?
Wow thats a very realistic build can i ask how much cost that front axle and rear axle ?
Where did you get the parts? I looked on their website but couldn't find axles like this one.
are you sure this project shouldn't be named "bulletproof" not just bullet? That axle looks bulletproof to me!!
nice
whats the name of the axles? who is producing them? please can you tell me a part number for the axles . thank you nice rig. beautiful rig
funny watching vids of ppl putting stuff together and seeing to many lil mistakes to count. hopefully when hlf the screws u thread locked top of threads that arnt even being used falls out dont tear rest up.
Why no inner bearings on the spindles?
Omfg! That's a sexy axle!
Good
Man those are nice. :) I noticed and I'm sure did at some point, The lower control arm hangers were orientated one up and one down? :) Love the skid plate on them. The front gear ratio is over driven?
amazing video sir...and sir,Where can I get these parts? plzz tell me...
Hello Where can I buy such axes? If I understand correctly, they are not manufacturing axial?
I have wanted some of those forever now but I just cant afford them at moment but 1day my channel will pay for a set thats for sure since its already paid for stuff and I have it just building up at moment I actually have enough in it for another rc but its going on a gmade saw back for my daughter thats more important than getting more stuff for me to keep her into a great hobby she's gonna have a barbie jeep that she built im just gonna help n paint it for her
Damn thats sweet axles How much are this things lol
How wide this axle? From your video, compare to scx10 axle, it's looks narrower
@irockrc
Жыл бұрын
I'm not sure it's been a while. My guess the width should be similar to the SCX10 axle. I could be wrong. Thanks for watching my friend!
En donde puedo conseguir el axial.
Really like the videos and content just wish the music was better..
So is there a reason you did not install the large bearing on the inside of the stub shaft? I watched video 3 times and slowed it down to .25 speed to see if i somehow missed it but....so I'm curious if there is a reason behind leaving it out of the build or if it was an accidental omission that I am the only one to notice?
@mr.hankie
6 жыл бұрын
Dawn Moody there is no need for a bearing on the inside of the stub shaft due to the carrier bearing support the carrier and the outer bearings support the axle. Just like a real cars axle.
hi! is it your project? Nice!!
hello this a question how can i get al those parts to make a truck that has a small engine and where could i buy it
What axialchassis do you use for this tuto? (dingo? honcho?...). thks
@irockrc
8 жыл бұрын
Hi Denovan, I used the Axial SCX10 chassis. Hope that helps my friend & thanks for watching! +Denovan Hari
which metal is this ? Aluminium?
We're do you buy thing like that
hola me podrias enseñar como hacer un eje casero
Disculpen me puede ayudar donde puedo conseguir el motor por favor
what axles are those
where can i buy this front axle
at 300 a set ill gladly stick with plastic axles. SSD has some nice ones for 60
@irockrc
7 жыл бұрын
Everyone's budget is different. IMO money well invested. Currie is a big name not only in performance but in championships!
ở viiet nam có k a
waaaaahhhhwwww
Probably been asked a thousand times. But. Do you have a parts list for this build?
@irockrc
9 жыл бұрын
Sorry I don't have a part list but if your interested I can do an overview vid on the build and list the parts & links on the video. Thanks for watching Mike!Mike Reuling
@cheeops
9 жыл бұрын
That would be great. I'd like to do alot of the same things.
hope you know you forgot the inner steering knuckle bearing
Questions on this!?!?
Amigo gostaria de comprar um diferencial desses como faço
Quase que eu fico surdo e quase você ganha um 'thumbsdown'
una mini trasmisión
Eu, José Maciel sou de São Paulo, quero saber quanto custa todas peças completa, pretendo montar uma carreta com dois eixos diferencial interligados tudo semelhante a uma carreta real, motor é tudo. Em metal como tá no vídeo, aguardo a resposta, obrigado.
Are these axles the ones sold by Vanquish?
@irockrc
3 жыл бұрын
Yes
No Grease inside?
@irockrc
8 жыл бұрын
I always grease my gears but not in front of the camera. It can't get very messy. I'm sure you don't want to watch a greasy video with the lens all covered with grease. It's all about using your common sense and imagination. Hope that helps my friend & thanks for watching!
shop kaha hai inka
How to price
wher are to order this part 😁😀😃😄😄😆😂😍
preço?
This Materiel how purchase and price ?
@irockrc
3 жыл бұрын
www.vanquishproducts.com/currie-rockjock-scx10-ii-front-axle-grey-anodized/ Hope that helps my friend and thanks for watching!
link? for buy
@irockrc
3 жыл бұрын
www.vanquishproducts.com/scx-currie-axles-1/ Hope that helps my friend and thanks for watching!
this is Vanquish product
how many
Uno quiere madurar... y le sacan estos jugetes a...
bao nhiêu tiền
Hi where can I buy one of this ? :) tks
@irockrc
7 жыл бұрын
If your interested in the chassis it's for sale? +Jimngu Gk
@jimngugk4741
7 жыл бұрын
I like to buy the axle :) and transmission :)
Кто знайет где можно дастанет такию апарат
Eu quero um desses
lon
.
ใ