What exactly do I need to get to convert her to a 2 speed transmission spectrum mini servo and what else?

@RCGirl

4 жыл бұрын

You'll need the 2-speed gear set. This is the stock one: bit.ly/2Y4NDYL Hot racing and SSD also make a 2-speed conversion set, though i think a bit pricier.

@RCGirl

4 жыл бұрын

Oh and make sure this is for the updated scx10ii kit version (because it wont fit the older transmission case in the RTR)

@lstruggy

4 жыл бұрын

RC Girl ty soo much rc girl! I just ordered it from amazon (not cheap! $54 🙃) I’m finally ready to finish my scx10.2 the newly released scx3 inspired me lol cant wait! Also ordered my trick rc light set like u have on yours it’s gonna be awesome! ✌🏽

I love the build kits because you have to go through putting the RC together from the ground up. You know the in & outs of your rig. Makes it easier to repair/upgrade later on.

You nailed it on the two speed, it's a must FOR SURE!!! Hard to go back to a single speed since my trx4 2021 bronco

I also got the Traxxas shocks for my scx10 ii as they come highly recommended. Be aware that you will loose up travel as they are longer than the stock shocks when compressed. Also, consider centering your wheels in the wheel wells before you mount your body; I moved my body back about 4mm from the dimples and lengthened the rear links with nylon washers the same amount. A+ for your enthusiasm, but C- for no doggie this vid! Can't wait for your next update.

Yay, i was checking on your channel every day. Im so happy you uploaded. I might get my own kit soon

awesome video. i cant wait for a vid of it running

Time to invest in some ProLine or Incision shocks!

@chrislane597

5 жыл бұрын

thats what she said! lmao

Thanks for sharing! I def need to make it out to Axialfest this year.

Great vid, thanks for linking everything!

I have been looking at this kit as well. Your video was just what i needed to make up my mind. Thanks for another great video, you rock!

@RCGirl

5 жыл бұрын

Thanks, yeah it's a fun build. I'm excited to get some electronics in it.

Great video this rig was my 1st Axial Scx10ii kit. definitely looking forward to seen your all done 😃

Great to see you again, I have missed you

Great video as always!

Love your excitement! Oh, and with your guitars... you know you want to play something for us 🎸

Good video love the stratocaster and cute with the hat 😊👍

My future build:) nice unboxing! Thumbs up!!

Good stuff I love that kit !! I love your smile.!!!!!!!!! You look so happy

Finally made up my mind and going to be getting into the Scale Crawler genre so currently brushing up on your older vids, especially Axial ones like this as I’m looking to get an SCX10 kit (comparatively cheaper than buying a ready to run)…I have an idea on building RC stuff, as I’m used to pulling my existing stuff apart and customising them…but RC Crawlers seem to be like RC Drift cars….very very detailed and extremely scale…oh and fantastic fun with both upgrades and accessories lol On a side note, your vids during Axial fest a while back were brilliant - sadly we don’t get stuff like that here in the UK….yet (though at a local level clubs do have courses and fun days). Hopefully once COVID19 is over, they’ll run more and we get to see you out there having more fun 😎🙏

Great video! I’m working on my first build right now. TRX4! Adding the fender wells too. Thanks!

Excellent video. Much love for the scx10.2 series👌. Subscribed 😀👍

Cant wait for a comparison to the trx

@RCGirl

5 жыл бұрын

Me too!! Def think the trx-4 has some higher quality components and features, but doesn't mean this one can't perform just as well

Can’t wait to see the final look of it! SOR has some great wraps. Flipping the shocks actually does the opposite. The piston will be in a air pocket at the top of the stroke, which would be bad. Also, the links won’t rust because they’re aluminum. The cheap rod ends and plastic pivot balls will be the first thing to fail.

Cool video, informative , fun bloopers too, lol.

Cute presentation, I think I'll have a look at the SCX

Sweet build can't wait to see if finished yes we are going to axial fest this year to hope to see you there

@ronhopper2472

5 жыл бұрын

This is my first year all so

Great video✌👍

Holmes hobbys has a good crawler combo i have the 1800 Holmes hobbys revolver and sidewinder 4 in my trx4 great setup

I was pleasantly surprised by the packaging and product quality of my GRC inner fenders. I also got a forward servo mount and lcg battery tray. It's a fun kit build! Nice work 👍

@RCGirl

5 жыл бұрын

RIght?! Same. I thought it was a great quality kit. Usually with cheap stuff from china, you're lucky if you get bubble wrap. What servo mount and battery tray did you get?

@JK-qv8sv

5 жыл бұрын

@@RCGirl I got GAX0028A and GAX0029 from rcmart. They aren't necessary upgrades at all, the stock form works great, I just like how it cleans up the front end and gets rid of all that plastic, and it does provide a slightly lower LCG. Integy and Samix also make nice versions of this setup.

This kit is really good, the raw builders kit not so much, I turned mine in to my competition truck and it turned out really good., good unboxing, good build 👍🏻

Great video... Thank you. I Love getting a new RC. It does not happen enough. I always wanted one of these. Maybe someday. kits are so fun. altho i do hate biulding shocks.

You really are getting into every aspect of the rc hobby. I love my scx10 but I sometimes wish I had a rock racer/crawler. I would probably think the same if I had a crawler. Lol. I seen someone fit the wrangler body fenders that are on my scx10 but they cut like a half inch off the finished end and glued them on. I don't know if I would be able to do it but this gives you something to think about. I would look at the axial dingo fenders. If they have the same fender, wheel cutout size, it should be a clean bolt on part. I am going to look into getting those wheel wells cause I go by water alot, while walking on a river trail and my gorilla tape wheel wells eventually came off. I would probably have to cut more plastic off the front cause of my wrangler body. Thanks for sharing your experience in the hobby cause I learn more about the hobby this way. :)

The TRX4 shocks are great, Specially since they have many springs available to them you can fine tune the suspension way better than ANY other shock. You should give them a try, They dont leak and They CAN out perform all "Scaler" shocks... If they were only more detailed or scaled they would be the perfect shocks.

Congrats on your little exposè in that flight mag. Nice that you move over to Axial on this one always keeping it moving. I recieved your sticker my daughter loves it. Thanks for your time.✌✌✌🎯✌

@RCGirl

5 жыл бұрын

Awesome!! Glad she liked it. Does she rc too?

AWSOME video!

Awesome seeing a woman in the R/C game~! I enjoy your videos gurl.

awesome job girl!

I am a new sub to your KZread channel and I have the mud gard kit and I love how well it fits. Your SCX10 ll looks good have fun with it.

those tires are awesome

Nice video!

Thanks for doing this video very informative. Might have been helpful for us to see your struggles with the transmission so we could learn with you. Would be great to see if you do the 2 speed conversion.

@RCGirl

5 жыл бұрын

Next time! Yep, I'll probably pick up the 2 speed conversion at some point.

So adorable:)

Also since youre going sensored upgrade your drive gears in the transmission to tye hot racing ones.

That's a cool light kit

you do that in a very sympathetic way :)

"Back in the day...." we had a drinking game that involved watching the Bob Newhart television show.... Every time a character said "Hi Bob" everyone had to take a drink. Your assembly videos will become the modern version (along with craft beers for the drink of choice) ...to wit: " (These things) are SUPER COOL!" You be the master of RC hyperbole. :-)

@RCGirl

5 жыл бұрын

Haha when I'm editing and watching myself back... I realize I say some of the same things a ton. Whoops!

Great video, Thanks RC-Girl! Hope You’ll make a comparison video with the TRX-4.

I'd be overwhelmed as well

i ran brushless on my scx10v2 kit version (like yours)... i dont need 2 speeds, thats the reason i never bought a trx-4. the trx-4 sport kit version though, the one without 2 speed i am seriously considering... but i just bought a vs4-10, so that can wait. btw, the only upgrade i opted for the scx10v2 kit transmission is the vanquish motor mount... the gears have held up fine for almost 2 years now.

Good info. I would have bought the Yeti kit, but they quit selling it for some reason.

Hmmm my eyes is on this rig looks good and better than the old kit:)

Great video, hi from Costa Rica 🇨🇷 🇺🇸🤜🏻🤛🏻

@RCGirl

5 жыл бұрын

Hi!

Great review there! i thing scale builder's guild have right:) take incision they are epic:) Great work.. 👌👌

Nice build so far. Will be great to see it finished. I thought at 15:01 you said "shit servo" haha

@RCGirl

5 жыл бұрын

HAHA, I mean those are definitely out there!

Good stuff,,

Awesome vid and build... i have a lot of the same tools you do...😁👍👍🔥🔥

Go with the blue!

@RCGirl

5 жыл бұрын

Yeah I think I will! Even though it's not "era specific" 😁

Awesome built. Let see your fleet of RC cars/trucks. 👍👍👍👍👍

@RCGirl

5 жыл бұрын

I'll have to make a video on that!

@electroddxful

5 жыл бұрын

@@RCGirl That sound good. Thx. 👍👍👍👍

go girl your the best luv you

Castle mamba X with a 2280 or 2850 would be great. Tuned well, a 2850 would get rid of the need for a 2 speed. I typically gear 5.6:1 (spur/pinion) and have never had any desire for 2 speed transmissions

Great job! This is a nice kit, and it performs pretty well. The roof rack is going to be a pain to mount onto the body! ;)

@RCGirl

5 жыл бұрын

oh is it a pain? Ugh. fun! haha

@RevolutionX

5 жыл бұрын

@@RCGirl try pre-threading the holes on the inside brackets with the screws a little first. It might make it easier.

Great video. You need a Tamiya kit in your fleet. Gotta have at least one since they're the OGs of the RC hobby. The two speed transmission is more of a gimmick than anything. I mean if it was so great you'd see all the crawler companies doing it. Just optimize your gear ratio and you should be golden. By the way the company is called STRC. I've been using their parts for years. They make some awesome aluminum and brass parts.

nice! gotta get one crawler too, but im thinking about trx4 sport :) greets

I have never been a fan of the clear body, I just got the Toyota 4 Runner hard body, it’s really. Nice it would be cool if you gave your opinion. Nice video, I’m impressed

I want to assemble this one, too ;-D

I purchased the Vanquish motor mount & Atlas transfer case whenever I built my kit, they are great upgrades. I cracked one of my little motor mount tabs which is why I decided to buy those Vanquish parts, lol. I think Vanquish makes a proper spur gear shaft that eliminates that play as well. (:

@jahmenrcbuildingasone4254

5 жыл бұрын

I'm intrested in what you mentioned about Vanquish motor mount. I cant find them.

@mangzrc

5 жыл бұрын

Jahmen RC Building a One They are on Vanquish’s website under SCX10 ii accessories. They are available in “clear” & black.

Nice nice nice...😉👍👍👍

Lookin good so far rc girl! After using brushed motors for a while in my axial wraith, I tried a sensored brushless setup. I will never go back.

@RCGirl

5 жыл бұрын

Yeah, spoiled now... 😏

@stevenf0

5 жыл бұрын

Nah, it's just the evolution of technology. Brushed motors were the best like ten years ago. Now they're just old and obsolete. For what we do anyway.

@RCGirl

5 жыл бұрын

@@stevenf0 "old, not obsolete" -Terminator

@stevenf0

5 жыл бұрын

@@RCGirl I stand corrected 😉

sorry that through the translator you are the best, and you have golden hands 👍👍👍👍👍💝💝💝

@RCGirl

5 жыл бұрын

Thanks!

You are famous.😂👍

Hi.Very nice video! Tel me how you take out the torque twist to this truck.thanks

You better sticker sheet with kit. Like the camo windshield banner.

I only bought the Chassis and the truth that I disengaged with Axial. Too many pieces of plastic for what one pays. The Cheap Copy of Axial looks much better. I could not return. but I ended up buying another Redcat gen 8 brand chassis. Greetings. I love your videos.

Wow " This day just gets better and better. Thanks for topping off my great day. REAL COOL GIRL. LOL. Your personality is so fun. Your looks are so perfect. You know how to make a man smile. You would really make a great person to have in my life. Well you are but on KZread. That's good all except. I wish well let's just say. HEART TO YOU. ALSO RADICAL BUILD. Oh and so I'am a steel worker for the shipyard but I only work 40 hours a week but guess what? I got a weekend job at hobby town. So just wanted to tell you that because everytime I show up and see all the cool rigs. I think of you. 💌

@RCGirl

5 жыл бұрын

thanks for the kind words!!

@magia5035

5 жыл бұрын

@@RCGirl Thank you too. Rc girl. 💞💟💌💛💜. Ps your so dreamy.

super cool lol

nice😍

do you know if you can use the rear axle for a short course truck?

Hi, so I purchased my Axial scx10 2 Jeep Cherokee kit about 10 months ago and I built it for my wife and I to see if she likes it and if so we will be getting her one as well. The only thing is I only have a 550 Redcat motor and Esc for it but it’s sat on the shelf till now. We are going to finish building it hopefully this month if the funds permit us doing so. Your video on this rig was one of the first I watched before I built it and yours came out auwsome! I’m on the fence about maybe getting the rc4wd leaf spring conversion kit cause it certainly takes away a lot of the crawling capability but it looks great. Anyway I wanted to ask you where u got the wheel wells for your truck? Thank you...

I’m going to Axialfest 2019 and I went to Axialfest 2018

You prolly wanna get the cracked part replaced as its area where link is mounted. It will break in near future as it gets stressed from crawling

Hey I brought one and there was peace is mesing was there any gone in yours

Did you just use 1 of the 2 shims on the parts tree?

When you bye a rc from the company they ask you to put a protection insurance for 3 month is this a good thing or a waste of money?

I think you meant STRC, looks like the Street Racing Concepts logo. They make good gear.

@robertbrass6255

4 жыл бұрын

soleepiphany lol! smarten up

What motor and electronics did you use for your SCX 10 2 Jeep Cherokee

Nice build , and guitar . You Play ?

@RCGirl

5 жыл бұрын

Yep - mostly acoustic stuff now

Love this vid and many of your others, but I gotta correct one thing... it’s STRC.

What was the name of the tool kit you spoke about on Amazon

Hey RC Girl, my favorite highlight was you . Your videos are great too

@RCGirl

5 жыл бұрын

Aw shucks, thanks!

Better looking than rc sparks guy.

Holmes hobby brushless 👍

Gloves!!!? Don't need no stinkin gloves !!! ha ha great video,u da bomb girl !

@RCGirl

5 жыл бұрын

Haha no gloves for this build

I think the fender kit was for the axial dingo kit, more like a land rover body or the hard body cherokee or comanche body

@RCGirl

5 жыл бұрын

Yep, you're right

@RCGirl

5 жыл бұрын

🤦🏼‍♀️

Go with the SSD 2 speed don't go with the hot racing too much play I had the hot racing and swapped it out for the SSD way better car hot racing makes pretty good stuff

hello rcgirl, would you like to make a video tutorial of how to load the shock absorbers of scx 10II with oil ?? thanks !!!

maam im melvin from the philippines 1 of your subscriber may i ask something, could axial scx10 2 handle 4s lipo battery?

@RCGirl

5 жыл бұрын

Depends on your motor kv and esc combo and what lipo cell count they are compatible with. Typically the transmission/gears in crawlers are not meant for high speeds. If you want to run 4s, you can also change your gear ratio (swap out pinion gear) so you don't overheat your motor, but that get's beyond my expertise and advising.

How about some licks on that guitar @ the end of your next video?

@RCGirl

5 жыл бұрын

Haha! Back in the day I had a music youtube channel but I'm not gonna give that link out ;)

I'd like to find one of these kits. Must be like hens teeth though. Haven't seen a single one for sale anywhere.

What two shims and where do they go, I’m having the same problem or can I get a link to the vid please, thanks.

@RCGirl

5 жыл бұрын

This is the video I found. kzread.info/dash/bejne/lK141rxwoc22kdY.html He used a rubber o ring, but the parts tree comes with a small plastic ring that is the perfect size. I found the part because someone commented on his video that it's included as part of the parts tree (but is never mentioned anywhere!)

@RCGirl

5 жыл бұрын

Oh and I ended up just using one shim.

@nickthegrip7821

5 жыл бұрын

Awesome thank you very much!! 👍✌️

So it's worse than TRX as plastics are crap and brake so easy while assembling?

So i need the electronics and paint to get it ready to run?

@RCGirl

3 жыл бұрын

Yep, motor/esc, servo, receiver/transmitter, battery/charger, and paint. Or you can pick up the rtr which only requires a battery/charger

@cooperearhart2607

3 жыл бұрын

@@RCGirl Nice. I will probably be buying this soon. Thank you.