Timestamps Binding/ESC issues: 2:17 Benchmark course runs: 3:37 Lizard Ultimate and brushed motor demonstration: 5:53 Close look at the Furitek kit: 7:40 Finished product and first runs: 11:40 Upgraded course runs: 15:09 Final thoughts: 21:51

When I upgraded my servos on my AX24 I needed to set the trim for the rear as well. So I disconnected the front servo from the ESC and then set the trim for the rear. Plugged the front back in and it stayed right where I set it. It tracks better now than stock out of the box.

@CapeCrawlers

Жыл бұрын

So you plugged the rear into the CH1 to trim it and it stayed?

@juanaristizabal2875

Жыл бұрын

Exactly what I do too

@darksidejedi77

Жыл бұрын

@@CapeCrawlers yep that's what I did

@shadowmurloc9351

10 ай бұрын

Can you explain how you do the whoe process? Mine just goes back to what it was when I plug it back in

There were two reasons why we decided to bring the skid plate lower. One was of course clearance for the motor but the other one was to bring the weight of the transmission/motor lower on the chassis itself. The loss of ground clearance is more than made up by the lower center of gravity. I'm glad you enjoyed it 👍.

@CapeCrawlers

Жыл бұрын

The whole package worked together extremely well! Super happy with it. It completely changed my perception of the truck.

@bdog7262

6 ай бұрын

What is the absolute ultimate motor transmission package for this set up??

@Gamyrc

6 ай бұрын

@@bdog7262 I prefer Lizard pro and micro Komodo for this one but to be honest everyone is different in how they drive so you may get 100 different answers to that question 😅.

@bdog7262

6 ай бұрын

@@Gamyrc is the micro Komodo the only size that will fit in this? Also could you help me out with telling me what are some awesome axles for this build. I’m starting from scratch and want to do this right the first time. Save money that way. lol I want the best of everything

Your videos are great. For a product review video, you knocked this one out of the park. Definitely my favorite RC channel. I appreciate what you do for are hobby and thank you. 👍🏼

@CapeCrawlers

Жыл бұрын

Thank you, I appreciate that!

Awesome video as always, Adam. Making me want to get one of these.

@CapeCrawlers

Жыл бұрын

Thanks! It's a fun rig!

Great vid Adam!

@CapeCrawlers

Жыл бұрын

Thanks for watching!

Awesome video Adam 😊 what a difference in handling, it's like night and day

@CapeCrawlers

Жыл бұрын

Huge difference!

Super sweet, will catch on the next one

@CapeCrawlers

Жыл бұрын

Thanks for watching!

Nice man ! Works awesome 👍🏻

@CapeCrawlers

Жыл бұрын

Thanks! I enjoy it so much more now!

agree with the new up grade i have the injora 50 in mine and the brass plate but the wine with a little weight is insane

@jerryastevensjr4005

Жыл бұрын

Keep up the up grades and the new builds

Drops down a tad and moves it over a tad. The red part is the same for scx. They just made a new skid to be able to run the brushless. I tried without skid but it hits the link and bottom of battery tray. Glad to see they listened to me

Great video man keep going 🤙

@CapeCrawlers

Жыл бұрын

Thanks! Will do!

Great video! I have the RGT v2 defender. I love the look of it, but the slow crawl ability is crap. Last week I ordered an fcx24 with a bunch of upgrades. Today I ordered an fcx24 esc to put into the RGT v2. That slow crawl ability is what makes these things fun. Can't wait to upgrade the RGT v2.

@CapeCrawlers

Жыл бұрын

I agree with you about the slow crawl. It's probably the only vehicle oriented hobby where making it slower is better lol

Wow you just fixed my issue with the rear trim, can’t wait to mine done like this.

@CapeCrawlers

Жыл бұрын

I wish Axial had a trim function for the rear from the factory. It's a shame to have to find these expensive workarounds.

@surfcreature69

Жыл бұрын

I agree, but have to say the slow crawl looks pretty cool.

@surfcreature69

Жыл бұрын

After upgrading the servos and couldn’t align the rear very well I had to use the round disc servo horn just to get it close but it’s still not perfect and it’s ugly this way so I was excited to see you found they cure ha!

Rear servo trim solution! I cut two old steering links so I had the correct length to align the rear steering. Then I used marine grade heat shrink tube to glue them together. It took two tries to get it right. Also with an Injora red 050 motor the crawl control is awesome!

@BryanFolts

Жыл бұрын

I did the steering modification to the short drag link Not the knuckle to knuckle tie rod link.

@CapeCrawlers

Жыл бұрын

That's some clever problem solving right there!

@shockman8014

Жыл бұрын

I put an Injora motor on mine and the crawl control is much, much better. Not awesome but better. It also has a lot of brass. But when I see the technical and side hilling I will not put another penny into it. I hardly ever play with it. For the money I paid for it and the money I put into it I could have had something much better.

Been thinking of getting the AX24… With the Deadbolt and C10, I’m really getting into this hobby! Dad and even my young girls LOVE these things. They want another C10, a Bronco and the wife a Jeep. If I do that might as well get another for me, and I’m thinking AX24 ;)

@CapeCrawlers

Жыл бұрын

That is so awesome. You got the whole family into it!! Love it

hit the bind button a couple times and the light will blink however many times the number channel you're on. trim accordingly. turn off controller and turn back on to save and get back to the original channels

Far as the servo for the rear if you run proper steering link that will solve the issue your having. There are one made where the link mounts to the knuckle and the top arm is a certain length to account for the servo horn.

Great crawler does great on your course.. Now I hate mine, lol. Thanks for the ideas of what can be.

@CapeCrawlers

Жыл бұрын

LOL I hated mine too! But it can be revived!

mine weighs 436 with a 57% forward bias and 50/50 side to side and its a monster. I have picks and videos on IG showing it on the scales too. That furitek will obviously be a game changer though! 💪💯

@CapeCrawlers

Жыл бұрын

Yours is rad. What scale do you use out of curiosity?

@themidwestconnect

Жыл бұрын

@@CapeCrawlers skyrc bluetooth corner weight system! Great piece of equipment and really a bargain price compared to the older models. Setup is very simple and straightforward. Would highly recommend if your looking for a corner weight system!

adjustable links are the way to go. mine somehow worked with Treal links front and rear and the rear link connected on the top hole in the servo. I had adjustable links on hand though so I'm putting those oh the other AX24 in my build series. 💪💯

@CapeCrawlers

Жыл бұрын

That's a way easier solution than overhauling the transmitter combo!

@themidwestconnect

Жыл бұрын

@@CapeCrawlers 💯

Looks good man! What a change. One thing I noticed, I thing you could get away with mounting the ESC and receiver flat to the panel instead of sideways. The way you have it mounted seems to raise your center of gravity. Might be wrong.

@CapeCrawlers

Жыл бұрын

I think you're exactly right. It's awfully tall right now. I need to tweak that setup.

ive seen people set rear steering trim by cutting the stock arm that goes from the servo to the rack a drill it for a small bolt with head cut off and adjust that way

Love it

The ESC looks so clean

@LARANUD

Жыл бұрын

and the electronics

@CapeCrawlers

Жыл бұрын

It's a great looking setup

Good video! I have been having the same issue with my ax24. Took it all apart twice, trying to figure it out. Swap in a mofo rc 30 motor too to see it would help. Definitely going to Swap out the asc now.

@CapeCrawlers

Жыл бұрын

I was going crazy trying to figure it out! I almost put the thing up for sale I was so frustrated

@gatorrcgames

Жыл бұрын

@@CapeCrawlers yeah I haven't even touched mine in a few weeks other than putting on some mofo beadlocks wheels on it.

I want to do brushless soon but i have no clue what I would put it in! I've really fell in love with the look of the ax24.

@CapeCrawlers

Жыл бұрын

I'm eager to see what you choose. With this kit I don't think you could fit anything other than the micro. I did see Matt at 2FMRC put an ROP in his but completely reworked the chassis.

@farmboyrc

Жыл бұрын

@@CapeCrawlers I don't think I'll put it on an ax24 right now. I'm thinking about putting it on a deadbolt and making a comp build, but I'm not the richest person in the world so it might be a little later than I want but I'm definitely going to do one this year. I love my c10 to much to change the motor and electronics! 🤣

That’s really weird my ax24 never had an issue with any binding. Great video, and love the channel

@CapeCrawlers

Жыл бұрын

I'm glad to hear that! I must have overloaded mine somehow.

@aidenmizelle

Жыл бұрын

I did put some emac servos on it but still worked fine. I now plan on trying to convert it to a cheap injora chassis.

I have had that same noise at times on few rc trucks and cars. My dog herd it on your video on my tv and was looking to see where it was coming from 😂

@CapeCrawlers

Жыл бұрын

LOL was he doing the head tilt and confused look?!

@berniethompson8912

Жыл бұрын

@@CapeCrawlers yes sir 😂

I’ve found that brushless motors increase everything on a micro crawler including vertical even if they raise the center of gravity the slow speed will make it just as capable on a slope as a brushless motor while improving everywhere else.

@CapeCrawlers

Жыл бұрын

It's crazy how much of a difference that low speed torque and control make.

You can trim the rear steering manually with an Injora threaded steering link kit.

@CapeCrawlers

Жыл бұрын

That's a much more cost effective way to do it!

I’ve heard of you switch the front and rear servo wires, trim it, then switch them back, the rear will be set. Obviously if any adjustments are still needed a full repeat procedure is as well. Don’t have one so, not certain this would work.

@CapeCrawlers

Жыл бұрын

I tried that early on and I couldn't get the rear to keep the trim. Not sure if it's different with aftermarket servos, but my Emax's wouldnt maintain the trim

keep it up

@CapeCrawlers

Жыл бұрын

You got it!

I have the AX24 in my cart with the Furitek Stinger and other upgrades totaling ~$500. I can either do that or get the 1/10th K10 High Trail I want. I can't do both just yet.

Hey man! On your flysky you should try your rear servo on channel 5 or 6 and then you can have truly independent 4WS

@CapeCrawlers

Жыл бұрын

That uses the knobs at the top right? I've seen a lot of folks use that and it looks great. My only concern is one-handed driving

I feel the exact same thing I told my son that last night the exact same thing you said we all know that the stopping lectronics a junk if you're honest about it I mean yeah that you got a decent slow crawl but that's on the scx24

The only way I've found to trim the rear servo is with adjustable steering links.

@CapeCrawlers

Жыл бұрын

I've heard other folks say the same. That's a lot more cost effective than a electronics overhaul!

You should try Texoma's slayer chassis it's awesome! Mine is on fcx 24 axles. Park 250 motor injura shift servo(14 bucks but fast and powerful). Gladiator links by injura Tegu esc 3100 spectrum reciver. Injura scrambler style tires. 350 grams. Total beast!

@CapeCrawlers

Жыл бұрын

I need to check it out. I have had several people recommend that chassis recently.

I installed 1/12T 33% under drive gears front and rear , the slow crawl is now much better than stock .

@CapeCrawlers

Жыл бұрын

That's good to hear because I've got those on my bench right now debating on how best to utilize them!

@kevincasey6876

Жыл бұрын

I am also planning a front overdrive transmission in the future.

Having trouble getting the stock transmission to install in this upgrade kit. Do you have pictures of how it looks assembled?

I love my gt5 radio for crawlers, like ya said 75 bucks it has a lot going for it.

@CapeCrawlers

Жыл бұрын

Huge value in that setup

How do you manage to fit the body after installing the new receiver and module? seems the body won't reach the velcro mounts

I love the course & the videos. I did the furitek stinger in mine. Cut off the top plate & cut the lower plate just behind the trans. Moved the rx & esc to the rear of the bottom plate & the stock battery sits angled between the rx & front frame rails. It’s a little monster now.

@CapeCrawlers

Жыл бұрын

Sounds like a great setup!

I couldn't agree more with you these electronics they fitted to the Axial AX24 XC-1 has got to be the worst on the micro crawlers from axial Forward is bad bad but reverse is even worse... And yes I have also spent many hours trying to find out how to centralize the back servo! after fitting my e-maxx servos. So if you find out please let me know Thank you for sharing another epic video with us 🤜💥🤛

@CapeCrawlers

Жыл бұрын

The whole system is flawed. Good intentions but it fell short. So far I've only heard of folks switching the rear servo to the CH1, trimming, then returning to previous CH. But I tried that and the emax didnt keep it. Others have developed custom steering linkages to get the length to the point of centering the wheels. It's all crazy and unnecessary in my opinion.

@rcfungames

Жыл бұрын

@@CapeCrawlers yeah I managed to get my rear centralized by using the center hole on the servo horn 👍 And it's working great right now. 🤜💥🤛

Great video! Will share a link to the Lizard ultimate? Thank you.

@CapeCrawlers

6 ай бұрын

Here it is: furitek.com/products/furitek-lizard-ultimate-40a-70a-brushed-brushless-esc-for-axial-scx24-with-aluminium-and-bluetooth?variant=40137154232410 But I will say I think it has been discontinued and replaced by the new furitek python

@GeorgieBud2020

6 ай бұрын

@@CapeCrawlers much appreciated. Thank you!

Also if you have some injora double barrel springs swap them for the ax24 springs. Lowers CG some

@CapeCrawlers

Жыл бұрын

Great suggestion! I have a ton of those lying around.

@DadsRCGaragePNW

Жыл бұрын

@@CapeCrawlers the ones I like are about .25 shorter then stocks. Hit me up on the tok tik and we can chat parts and all that anytime. Hope that limit chain worked for ya if you ever used it. Lol.

I put my oem remote on 50% for slow crawl

Niiice 👍 it would be fine to see a comparison between this AX24 Furitek VS your titanium Trx4m beetle chassis w/ Furitek sys…💪 can you think about it ?

@CapeCrawlers

Жыл бұрын

Sure thing!

Is it as easy to toggle between steering styles as the original control controller?

@CapeCrawlers

Жыл бұрын

VERY easy. It's a switch on the side of the transmitter you can press with your thumb on the fly. Super simple. That is one thing I actually do miss about the stock electronics.

Hey Adam, have you noticed that the motor hits the front driveshaft on full compression? I have the same system and there is a perfect circle groove around the drive shaft where it hits.

@CapeCrawlers

Жыл бұрын

Yes I have! I saw a friend of mine fixed this by reversing the male and female ends of the drive shat and then trimming the female end just slightly to make room.

@payneja

Жыл бұрын

@@CapeCrawlers that’s a bummer. The drive shaft is pretty extended, not sure I have much more real estate to trim more. I will have to give it a go. I reached out Furitek and they recommended I switch shock position which is interesting since that is not an option with the stock chassis. Maybe the angry sparrow would give more mounting options to prevent this.

I just did this upgrade to mine yesterday and everything is good other than I get super bad torque twist? any reason to why that's happening. I mean its so bad that if I barely throttle forward the whole body is leaning.

@CapeCrawlers

Жыл бұрын

Torque twist is terrible on this thing. I think the additional power just amplifies it. You could put some aftermarket shocks on and adjust the preload and spring combos

Can I just use the Furitek system and plug my steering servos in it or do I need another esc to plug with my servos?

@CapeCrawlers

Жыл бұрын

You'll need a receiver to plug your servos into. The Furitek system comes with the esc, but no receiver.

What ESE did you use?

On the Note Fury Tech I feel like Nick's Motors 100% better so far navigate to Pancake so far so much better but maybe that's because I got the Revenge of pancake adjusted correctly on the blizzard Pro and I'm just still going to have to work out the Kinks on the new system

@CapeCrawlers

Жыл бұрын

I love Nick's motors. The SMP is probably my favorite. The smoothness is unreal. I don't know if I could fit one in the AX24 without significantly reworking the chassis, otherwise I would go for it

What battery did you end up using? Does it sit on top of esc?

@CapeCrawlers

Жыл бұрын

I’m still using the stock battery, or the EcoPower 450 trail batteries. It kept the same battery location

Will Furitek be selling just the ESC? I've got a slow-motion pancake waiting to go in my SCX. I like how the Bluetooth dongle is boxed up really nice. Any word on it possibly being waterproof?

@CapeCrawlers

Жыл бұрын

I am sure they will sell just the esc. They did the same thing with the UTB18 and I am sure they will follow suit with this. No word on waterproofing. I can tell you that I used the lizard ultimate, which is waterproof, with the flysky on this and it worked great. So if that's a big concern you could go that route.

@BPlus-oz7cm

Жыл бұрын

​@@CapeCrawlers just ordered the Flysky a couple days ago.. you're a heck of a salesman 😂

Any issues with rubbing in the front drive shaft?

@CapeCrawlers

Жыл бұрын

I can hear the tire lugs clicking as they touch the chassis but only at extreme angles and pretty minimally

Can the furitek brushless kit be installed and just keep the stock transmitter?

@CapeCrawlers

Жыл бұрын

I’ve seen some folks use the lizard pro with the stock esc with success

Hey do we think the cedar will fit into this rig?

@CapeCrawlers

Жыл бұрын

I think it's too long but I am confident Furitek will release a skid or mount to make it fit!

How much that combo cost? And were we can order it? 😊

At this point, would you recommend just buying the furitek pro complete rtr?

@CapeCrawlers

Жыл бұрын

For me I enjoy the process of incrementally modifying a vehicle. I get a lot of enjoyment and satisfaction seeing the performance increase as I go. Buying the RTR is kinda like a shortcut.

What was the box beside the new one called, and where did you by your Furitek kit at?

@CapeCrawlers

Жыл бұрын

I used a FlySky GT5 transmitter and receiver along with the Furitek setup. I get my Furitek parts from Furitek direct or from Helidirect.

@bricebullard579

Жыл бұрын

Thanks man

@bricebullard579

Жыл бұрын

If I was to do this would my stock battery work with the sky fly receiver or the Furitek system

Hey mate I put a mofo rop in mine and when it flexes the front shaft hit the motor and is wearing a groove into it. Any suggestions on how to stop this? Thanks mate.

@CapeCrawlers

Жыл бұрын

Yikes. That's a tough one. Any chance you could flip the skid around and mount it rear facing? Alternatively you could make some sort of stop, maybe a small screw in the skid plate that the driveshaft hits first before making contact with the motor?

@chrisnewman3395

Жыл бұрын

@@CapeCrawlers I ended up putting spacers on the front shocks to limit travel. Worked really well and didn’t loose much performance which is good. Thanks for the reply again mate. Love your work.

Im taking this AX and putting its goodness into a Scx24 platform, this thing is pretty terrible unit. Always cockeyed off to the right if its under any load. barely can climb 50degrees. BUT I think once its all installed into a stable Scx24 frame it will make for a awesome 4ws setup :)

@CapeCrawlers

Жыл бұрын

The tried and true SCX24 platform to the rescue!

What kind of tire its is it look way bigger

@CapeCrawlers

6 ай бұрын

It’s the LGRP swamp kings. Definitely bigger than stock

My rear steering quit working on mine, I was at my buddies house it worked before I left the house got to my buddies would not work we plugged another servo into it there is power to the servo but the switch it’s not working does nothing

@CapeCrawlers

Жыл бұрын

Thats a bummer! Do you think it's the esc or the transmitter?

@andrewrichey7374

Жыл бұрын

@@CapeCrawlers i’m thinking transmitter because there is juice to the servo pushing the A or the B Button does nothing you can’t turn the back wheels by hand that’s How I can tell there is juice to the servo

what tool " bit set " do you use? can you link it?

@CapeCrawlers

Жыл бұрын

Lately I have been using this tool kit from LGRP: littleguyracingparts.com/products/trx4m-complete-tool-kit?pr_prod_strat=use_description&pr_rec_id=be0408ccf&pr_rec_pid=8079136325944&pr_ref_pid=7132459761849&pr_seq=uniform

@vincentcronin3361

Жыл бұрын

@@CapeCrawlers Thank you! i will take a good look at them!

Komodo Vs. Micro Komodo shootout! 😉

@CapeCrawlers

Жыл бұрын

Good idea!

@boredom.victim

Жыл бұрын

@Cape Crawlers it would be great content, very informative and helpful 👌 plus, it should be fun

Wonder if this rig is gonna get the NSDRC treatment. 🤔🤨🧐

@CapeCrawlers

Жыл бұрын

It should. I feel better about taking the build further now that I have my issues sorted out!

@RCCrawlerz209

Жыл бұрын

@@CapeCrawlers Works WAY better now, it seems.

how is it with the axial ESC?

@CapeCrawlers

Жыл бұрын

I have to try this. I didn't get to it during my initial runs. I will test it in the next day or so and put up a short

##TLDR WARNING## I got a new AX24 for my nephew, saw your first video and ordered some wheels/tire/brass and that Injora 050 50T and sent all that with it. My brother reports that my nephew is doing good with it, but its really jumpy. Just like your video, I'm assuming. After watching your video I figured an aftermarket ESC to the rescue, looked at all the Furitek stuff and I'm getting concerned over compatibility with the 2-in1 receiver on the AX24. There are warnings on the Lizard Pro with BT dongle module (FUR-2073) that its not compatible with HRZ00005 receivers. Is the Spektrum (SPMXSE2425RX ?) that comes with the AX24 this variety with a HRZ0005 board? You show the Lizard ULTIMATE (Fur-2226) running on the 050 brushed motor. That's exactly the performance I'm targeting (its better than I'm looking for actually), but its on the flysky receiver. You comment in the video that it will work with the stock receiver and radio. I looked it up and found the Lizard Ultimate has no such compatibility warning on the Furitek site. So with or without the FlySky, this is a potential solution @+$100 I've seen other folks that have bought the full Stinger package including the integrated Lizard PRO (in the box with Blue Tooth inside). That one also works on stock electronics. So i'm thinking that the Lizard Pro in the AX24 stinger package is not equivalent to the Lizard PRO that you can just buy by itself (beyond the cosmetics being in the box with integrated BT and everything). Seeking lower cost solutions, I looked up the IGUANA ESC, thinking this would be a cheaper alternative, but same compatibility warnings. Bottom line, i'm looking for a "good enough" brushed ESC, appropriate for the heavier than stock weight modded AX24 with stock receiver, and would provide a good slow crawl experience for a budding enthusiast. Basically, how would you have fixed this without going Flysky and Brushless? That is specifically what I'm trying to avoid for cost reasons. The Ultimate is $110, feels like i should just get the whole AX24 stinger kit at that point. Is there a $50 or even $75 solution for brushed motors and stock radios? Any help would be greatly appreciated!

@CapeCrawlers

Жыл бұрын

I had to do some research before responding here. It’s easier to show you. Check out this short I just posted: kzread.infoU1CmNrgKvfc?feature=share To summarize, I think your best bet is to wait for furitek to release the ax24 lizard as a stand-alone purchase. The stinger combo does work, but it’s a pricey upgrade. Hope this helps!

@PoleKat11

Жыл бұрын

@@CapeCrawlers Thanks so much for looking into this! I think waiting till they release it is a good idea. A radio isn’t in the cards and I think waiting for an ESC only or finding funds for the whole stinger kit will be the answer. It’s still a super fun rig as is.

its funny i just remember it was the only video i had to mute just because of the noise aha

@CapeCrawlers

Жыл бұрын

The noise was so painful!

I bought one , should have built one instead.

@CapeCrawlers

Жыл бұрын

Sometimes you're better off that way!

Yeah putting a new motor in it don't do it really that good at Justice with that ESC it's like a start-stop switch that's it

If only money grew on trees

@CapeCrawlers

Жыл бұрын

That's why I need to get my budget build video up. This little monster has turned out expensive

Complicated little truck

@CapeCrawlers

Жыл бұрын

Yes it is. It was like navigating a maze getting this thing sorted out.

@rcjoe406

Жыл бұрын

@@CapeCrawlers can't wait lol it's on my to do list 💯💪🙏

SCX24 - Hidden Secret! Channel 3 & 4 Trim and Dual Rates / End Points! Even Throttle Dual Rate! kzread.info/dash/bejne/mJyWl8mrj8y9lJc.html&ab_channel=TheShop-MiniRC

Thanks for the waste of time

Ax24 or Scx24?

@CapeCrawlers

Жыл бұрын

AX

@americandeadhead5025

Жыл бұрын

@@CapeCrawlers I appreciate that thanks. I need a new project 😂