This press has worked like a charm for my projects kzread.infoUgkxajoEbapTfqWaadnqb04h6U576yxXp-FE . I didn't even secure it to my table top, mainly due to the fact that I was using a 15 lbs drill vise. It's not flimsy at all as to what others have claimed it to be. Make sure the locking nuts and levers are secured and there won't be any issues with light pressure and patience. I was able to drill through aluminum, plastic, and steel (steel took a while) with no problems at all. Yeah it took a little longer than a regular drill press, but I don't have the space OR the money for one.The instruction manual was worthless, but luckily assembling the press was intuitive. However, the manual would be good for ordering replacement parts if needed. There is a nice breakdown of the parts that are included in the kit. Before ordering, make sure it is compatible with your unit, it is clearly stated what models the press is compatible with.This was an excellent purchase for $40!!

the best home made drill press

@mr.ranyhomemade2466

11 күн бұрын

Thanks for your best time to watch this video Now I have upgraded this drill to menu speed and hope you like it. please help me comment

Very good!

@mr.ranyhomemade2466

Күн бұрын

Thank you for your best time to watch my work I do hope you like it. Nowadays I Rebuild homemade drill press and add two pulleys to the motor and spindle this is much better than the previous time used the motor and chuck directly. Now I'm stuck to finish my lathe because no items were found here. The most handmade-made but in this time I do need some. Thank again.

Thanks sharing your content

@mr.ranyhomemade2466

2 жыл бұрын

Many thanks for your comment I hope you guy enjoyed this video 🙏

muy bien 👍🏻 gracias, por su vídeo excelente.

O que eu posso dizer, você é ótimo! PARABÉNS 👏

Отличный станок, молодец, есть чему поучиться. 👍

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment and I hope you are enjoyed

Спасибо друг!!! Станочек просто огонь. Здоровья и успехов тебе.

@mr.ranyhomemade2466

2 жыл бұрын

Thanks mate

Parabéns amigo magnífico trabalho! ( Good Job magnifique Job!!) 🇧🇷🇧🇷❤️💜❤️👏👏👏👍🙏🥀🥀

Estou impressionado com sua criatividade e habilidades! Parabéns.

@mr.ranyhomemade2466

Жыл бұрын

Thanks for your comment it is handy to work I have only a problem because the speed motor one day has to change.

мастер на все руки, молодец мужик.

Eres un gran genio inventor, un cerebro y tienes mucho talento 😃👍🏻👏🏻👏🏻👏🏻

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment Now I’m making a cross table for Vise and will upload next week if possible. Hope you will enjoy this Thanks again

Thật tuyệt 👍!mọi thứ rất hoàn chỉnh chắc chắn,cho đến việc trình bày video của bạn,nó đã lôi cuốn tôi xem đến phút cuối cùng!

@mr.ranyhomemade2466

2 жыл бұрын

Thanks mate

Olá meu amigo trabalho projeto fantástico !!! Grande abraço!!!

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for the

@5AmazingIdeasMrZ

2 жыл бұрын

Amazing Video, thanks Mr Rany Home made!

Muito bom seu projeto parabéns

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment

Вот это техника такой же крепкий лайк и вечный подписка !!!👍👍👍👍👍

@mr.ranyhomemade2466

2 жыл бұрын

Thank you mate

Amazing...

Maravilha... muito bem explicado

@mr.ranyhomemade2466

Жыл бұрын

Thanks for your watching and comment

👏🏾👏🏾👏🏾alem de soldador é um ótimo ferramenteiro

@mr.ranyhomemade2466

Жыл бұрын

Thanks for your time to watch

Great job bro... You guy could make everything for using at home....

@mr.ranyhomemade2466

2 жыл бұрын

Thanks to my friend Now I got four machine ready support my workshop

Essa e a melhor que eu já vi no KZread! Parabéns pelo trabalho 👏👏👏👏

@mr.ranyhomemade2466

2 жыл бұрын

Many thanks for your comments

@bridges5659

Жыл бұрын

Isso é 100% correto. 👍

Show amigo 👏👏

@mr.ranyhomemade2466

2 жыл бұрын

Thanks to my friend How are you doing? Seem to long never see you launch

Hats off to your work, really it's the best, my greetings from Algeria 🇩🇿.

Perfeito esse trabalho show parabéns 👏👏👏👏👏🤝👍💖🇧🇷

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment I hope you enjoyed

Incredibly how you make this from scratch 😮

Quedó de lujo Hasi voy acontruir él mio

Nice work. We shared this video on our homemade tools forum this week :)

You are so talented! I love the blue!! Keep up the amazing work!!

@mr.ranyhomemade2466

2 жыл бұрын

Many thanks for your comment and watch my youtube video and I hope you get more impressed as did. Thanks again,

Good work Rany... you inspired me to make the same DIY Project... thank you for sharing, cheerss🍻

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your watching and comment Hope you enjoyed

@sushilkumar-yt6gx

2 жыл бұрын

Exilent

Muito bom mesmo gostei

@mr.ranyhomemade2466

Жыл бұрын

Thanks for your comment I hope you enjoyed

เยี่ยมเลยครับ👍👍👍

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment Hope you enjoy

I congratulate you excellent work

Класний апарат. Вподобайка.👍👏

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment

Aquele policorte foi você que fez também ficou tudo muito bom👍👍👍👍

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment l hope you enjoyed

SO.Good.I.like.so.much.

Well done great job

@mr.ranyhomemade2466

2 жыл бұрын

🙏

Really You are genius

@mr.ranyhomemade2466

8 ай бұрын

Thanks for your comment I will try my best

@RedmiXiaomi-jk8ql

5 ай бұрын

​@@mr.ranyhomemade246611

I am from brazil thanks you video is inspiration.

@mr.ranyhomemade2466

5 ай бұрын

Thanks I’m living in the third world country I’m not a good chance of finding a professional lathe cause the prices so homemade is the best. If you would like please like sub

bardzo fajna wiertarka super. bardzo dobre wykonanie i pomysłowość . zrobiłem kiedyś podobna wiertarkę . miałem silnik 3 fazowy 7500 Wat i 2800 obrotów, bez przekładni i sterowanie z falownika . pozdrawiam kierownika

@mr.ranyhomemade2466

2 жыл бұрын

Super handy this drill press it helps my workshop a lots Thanks

@badranalfalaki9881

11 ай бұрын

Good and useful 👍

Thats a very well made and rugged machine...well done.. Greets from Germany.

@mr.ranyhomemade2466

Жыл бұрын

Thanks for your comment I hope you like this video. This drill press is very handy to help shop cause do not have a professional drill Press. I will up loamy new video soon is homemade Wood Chipper.

Good Idea and job. I Like this drill press .

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment I hope you are enjoying this video

Beauty👍👍👍🤝

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment

Hola, Mr. Rany Homemade, excelente trabajo !...Estoy tratando de hacer uno igual, pero me faltan datos ....no tendra Ud. algun video con espesores y medidas del proyecto?...Gracias desde Mar del Plata, Argentina.

@mr.ranyhomemade2466

Жыл бұрын

Thanks for your comment I hope you enjoyed this video I will try the best if can. For now I’m making Wood Chipper I will upload soon I hope you will enjoy 😊

Excellent, you are creative

@mr.ranyhomemade2466

Жыл бұрын

Thanks for your best time

Respect from Russia. VERY GOOD JOB!

@mr.ranyhomemade2466

Жыл бұрын

Thanks for your watching and do hope you like 👍🏻

Vary vary good job thank you

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment and I hope you are enjoyed

Muito bom , só faltou um controle de velocidade pro motor , parabéns !

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment lovely

Well Done! Very nice drill press. Like to watch your videos! Best greetings!

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment and I hope you are enjoyed in this video

Excellent

@mr.ranyhomemade2466

4 ай бұрын

Thank you

Very nice done ! congratulations....

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment I will try more best

El mejor de todos

@mr.ranyhomemade2466

2 жыл бұрын

Thanks mate

Good work brother keep teaching us . Genius work to I will follow your illustration to make mine keep up

@mr.ranyhomemade2466

8 ай бұрын

Thanks for your comment. I appreciated and I am so happy, now everything seems to be slow, I’m sick and I knew to slow for my project another job not good and budgete too. However I'm glad of you

Well made Press with a good design, your Stick Welding is also very good 👍

@mr.ranyhomemade2466

Жыл бұрын

Thanks for your comment I hope you like it Actually I don’t have enough skill at all bait I have ideas how to make it. I do have other skill work but Covid 19 make a problem. Many thanks

@bridges5659

Жыл бұрын

@@mr.ranyhomemade2466 Your ideas and determination become or leads to the skill. When you decide to build something , you will be planning that in your mind. Imagination on that development is the key also and if you continue thinking and planning in your mind at night , it becomes hard to fall off to sleep. This happens to me as well. BUT , believe me , YOU ARE HIGHLY SKILLED. 👍🙏

Лучшая система на ютубе. Молодец

@mr.ranyhomemade2466

2 жыл бұрын

Thanks

Show 👍👍

@mr.ranyhomemade2466

Жыл бұрын

Thanks 🙏

Great job👍👍💖💖💖💖

@mr.ranyhomemade2466

2 жыл бұрын

Thanks mate

one of the best I have seen... (Y)

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment Hope you enjoy it today it very special support my workshop!

Aku suka sekali vidio ini

@mr.ranyhomemade2466

6 ай бұрын

Thank you for valuing me. I'm living in the third country everything expensive so brain is the best.

This is one heck of an idea ! Thanks for the video ! Very cool and inexpensive ❤ !

Good job mate, it works great too

@mr.ranyhomemade2466

2 жыл бұрын

Many thanks my friend your comment

👍 me gusta

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment This drill press so helpful my work

nota dez muito bom

@mr.ranyhomemade2466

Жыл бұрын

Thanks for your comment I will try the best now almost finish my magnetic drill press soon also I make from Shock Absorbers I hope you enjoying.

Excellent work and it looks like you use a homemade lathe and a homemade belt sanding table and more...

@mr.ranyhomemade2466

2 жыл бұрын

Many thanks your comment It very useful for supporting my homemade shop now I am making a cross slider table for drill press and I will upload this week I hope you are enjoy it,

Good luck man,Great

@mr.ranyhomemade2466

11 ай бұрын

Thanks for best time to watch

Espectacular trabajo mi estimado... felicitaciones 🍾 Ahora para que quede mucho mejor, instala un potenciómetro para poder controlar la velocidad del motor y podrás hacer las perforaciones más rápido y sin que se te estén quemando las brocas... Un abrazote 🤗

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment I hope you were enjoyed.

@leonvasquez2459

2 жыл бұрын

P

nice job man,,, i love it,,,,

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment and I hope you enjoyed it

Very nice build !!

@mr.ranyhomemade2466

Жыл бұрын

Thanks for your best time

Te felicito

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment I hope you are enjoying

very nice job

@mr.ranyhomemade2466

Жыл бұрын

Thanks for your comment

5:20 That is some sweet welding!

@mr.ranyhomemade2466

2 жыл бұрын

Much better than my old drill now it help me a lot

Man , that's great work. That's a quality drill press , far stronger and safer than one you would purchase. I will attempt this. You are a great teacher. Please provide me with the specs of the drilling motor that you have used for this project. Thank you and compliments from South Africa. 👍🙏

@mr.ranyhomemade2466

Жыл бұрын

I have appreciated your comments. I do happy to exploit this drill press and it helped my workshop continue the next machine. I will repair it someday with a motor drill press because the speed is so fast that I am going to replace another motor and work with pulley it sound of my plan yet. My concern about the spindle to keep the chuck it going to work or not. Thanks again

@user-yj8qt5ol8l

Жыл бұрын

добре вертарка

Wow

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment

W😲w.. Good Job Bro. ❤️🙏

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment I’m planning make CNC machine

Está precioso tú taladro de banco mi estimado amigo 👌 Y en cuanto sale hacerse uno así? No tengo nada de materiales de los que ocupaste... Saludos

@mr.ranyhomemade2466

2 жыл бұрын

Many thanks for your comment I really enjoyed this homemade drill press absolutely helping all the time

👏👏👏👏👏

@mr.ranyhomemade2466

Жыл бұрын

Thanks for your comment I hope you enjoyed

The amazing

@mr.ranyhomemade2466

2 жыл бұрын

Many thanks for your comment

top

Cool work sir thank you very much 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏

@mr.ranyhomemade2466

2 жыл бұрын

I'm so glad you enjoyed my video All love

@user-ct1mi1dl1x

2 жыл бұрын

@@mr.ranyhomemade2466 👍👍👍👍👍👍👍👍👍

@sheikhali2353

2 жыл бұрын

Nice making

Amazing work. you inspired me to make the same DIY Project... The best on youtube, thank you for sharing. Congrats...

@mr.ranyhomemade2466

2 жыл бұрын

Your welcome My country drill press cost expensive so impossible for buy I started hand drill now I can say I got handy machine drill press I’m glad it Bc help me a lots for my workshop. Thanks

@irvinemasakara9639

2 жыл бұрын

Wonderful work, I am going to copy from you soon.

You did very good with what you have to work with I noticed you made your own Vice you seem to be a very talented young man and very ingenious

@Larry-yo3wq

Жыл бұрын

LarryTessendorf

@mr.ranyhomemade2466

Жыл бұрын

Many thanks for your comment I do hope you enjoy it and will try my best for my next project.

Awesome bro, really i love it, i want to ask something, which machine did u used at 12.25.. what kind of machines can we use on this project, the tork power and rpm is important i think

@mr.ranyhomemade2466

Жыл бұрын

Thanks for your interest I am happy to share My is not good your asking but used motor technology Japan a kind of machine for drill press 750rpm I think it fast. Now I am busy new build lathe. When I finish lathe I will change this motor if possible.

👍👍👍👍👍👍👍👍👍👍10+

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment hope you are enjoying

Un genio, a partir de este diseño, podrías fabricar una rectificadora de corona volante, con piedra copa.

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment

Do a giveaway for it. 😊😊😊😊😊

Amazing Video, thanks Mr Rany Home made!

@mr.ranyhomemade2466

2 жыл бұрын

Thanks

what size of gi pipe to use that? your very intelligent for mde diy..

@mr.ranyhomemade2466

Жыл бұрын

Thanks for your comment I hope you liked Do you mean standing pipe, 100mm diameter

very clever man ...well done bro greets from australia

@mr.ranyhomemade2466

2 жыл бұрын

Thanks my dear friend I hope you enjoyed I will try more best

Muy buena la idea lo felicito falta que le adapte un un regulador de velocidad para las mechas más grande de esos electrónico

@mr.ranyhomemade2466

8 ай бұрын

Thanks for your comment. I appreciated and I am so happy, now everything seems to be slow, I’m sick and I knew to slow for my project another job not good and budgete too. However I'm glad of you

отлично!, только сверла заточить

awesome video ,but it would have been nice ,if the music level had been dropped . so i could hear Mr Rany explain what he was doing .otherwise it was a great built ,and i will subscribe and leave a like ,Mr Rany is an engineer . that is for sure :) there are many of us out there :) great work .respect

@mr.ranyhomemade2466

2 жыл бұрын

I am so glad for your comment and I really appreciated for your suggested. I’m sure that I want to make everything is good but I feel is not perfect at all because I’m not a good film and editor all thing I did by myself no one help especially I don’t have a good equipment. I knew music was loud because around my house and my village supper crazy noisy and I want to speak but my English very poor. I have more diy ideas to build some more machines but the problem is equipment and some tools never founded, like my drill press is not easy looking some if found cost so expensive. I appreciated your offer info I will try the best if I can.

(RJ, BRAZIL )O TEU TRABALHO FICOU MAGUINIFICO PARABÉNS

@mr.ranyhomemade2466

11 ай бұрын

Thank you

Good hit 👍🏻👍🏻 🇮🇳 Kuki 21|05|2022

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment

Its my dream

@mr.ranyhomemade2466

Ай бұрын

Very nice work it help me continue next machine, if you want to make it please check motor because mind a bit past.

@biharibabualive

Ай бұрын

Its parts are not available in my area, how can I make it?

hols buens alguien sabe que tipo de taladro uso para ese proyecto parece una taladro mezcladora de de alta potencia

@mr.ranyhomemade2466

2 жыл бұрын

Thank you mate 😍😍😍

Had to come back and watch this build. This old drill press has served you well hasn't it?

@mr.ranyhomemade2466

Жыл бұрын

Thank you for your patience and comment it is handy to work but I don't like the speed of the motor quite a bit fast I should be looking lower speed.

@A_Stereotypical_Guy

Жыл бұрын

​@@mr.ranyhomemade2466 look into getting a variable speed controller. A decent one is about $20 US. You can control the motors rotation output and maintain a good amount of torque. Much easier than rigging pulleys.

@mr.ranyhomemade2466

Жыл бұрын

It is funny for my country is not easy to look for I always stuck on my project sometime I found cost over. Thank you

@A_Stereotypical_Guy

Жыл бұрын

@@mr.ranyhomemade2466 you don't have e bay?

@mr.ranyhomemade2466

Жыл бұрын

Nothing here e bay and Amazon too

El problema que veo es que todo material no se perfora con las mismas revoluciones,y el taladro solo tiene una revolución.

@mr.ranyhomemade2466

7 ай бұрын

Thanks for your share.

Boa.tarde e mande um Visio desa maquina em português Bra

Bang klo saya pesen dinamonya saja yg persis seperti itu bisa nggak ? Harganya berapa ? Tolong dijawab, makasih

how much is your homemade late machine if you're going to sell one?

@mr.ranyhomemade2466

2 жыл бұрын

Thanks for your comment and info I made for my workshop I do need and I enjoyed to use it really handy work. Sorry I’m for sell.

D-20mm?

@mr.ranyhomemade2466

Жыл бұрын

It worked 16mm