My son and I replaced 3 feet of brake line on his 97 buick a few months ago. We used your first method of brake bleeding. It worked out great Gerry! MB BAR RANCH

@GerrysDiy

4 жыл бұрын

Hi Martin. Delighted it worked for you.We dont have many American cars here. Steering wheel on the other side and petrol / gas is lots more expensive here. Lots of diesel cars here getting 50+ miles per gallon. I worked in Oregon aver 20 years ago and loved the bigger engines. Thanks for commenting Cheers Gerry👍

@rikshulz9344

3 жыл бұрын

Great idea I'll try it 🙂

@humblewarrior6585

2 жыл бұрын

@@GerrysDiy When you use this method, is the brake pedal in the car pressed down or not ?...Not to sound stupid but just curious, as Ive done my brakes before using a short pole compressing the petal while lodged against the seat. By what you said, sounds like this method totally bypasses pressing the brake at all !!!...Thanks !!!

@savage22bolt32

2 жыл бұрын

@@humblewarrior6585 you don't touch the brake pedal with this method.

@enfield7123

2 жыл бұрын

Sorry to ask is a Buick the same as a vauxhall mokka

40 years as a mechanic and never thought of this. GENIUS!!

@adamborowiak4995

8 ай бұрын

You mean to tell me for 40 years of bleeding brakes I could of done this!?!? Ah! An't no way😂 the40yearguy

@rknight7509

2 ай бұрын

Don't be stupid 😂😂😂

@wouterkellerman4458

Ай бұрын

42 years a mech and never thought of this. Genius!

I’ve been bleeding brakes for 50 years - always needed two people. This is brilliant. Many thanks.

Dude, not even Auto school or professional experience has taught me something this useful as alternatives. Thank you.

@aviography

3 жыл бұрын

@RAGNAR Why knock on people? We all learn things at some point, and I'd bet your PhD neighbor is more financially well-off by building the medical devices, and can pay people who are auto technicians to work on his cars.

@davidparker9676

Жыл бұрын

I wouldn't trust it to get all the air out of the system. I have used suction to bleed the brakes and it is not very reliable. I will use a hand operated vacuum pump to get the fluid pulled through the system, but I found it never gets rid of all the air. I have found a simple product with a non-return (check valve) works like a charm. I use my phone's camera to video the fluid/bubbles out the tubing while I pump the pedal. I watch the video and can see when the bubbles are gone and when it is clean brake fluid flowing through. It is a true one-man bleeder product that works perfectly every time. The simple tool is the cost of a fast-food value meal. I don't need anybody's help to bleed the brakes now.

@theophany1770

Жыл бұрын

@@davidparker9676 but you don't share what the simple tool is?

@davidparker9676

Жыл бұрын

@@theophany1770 It's a GearWrench 2538 "One-Man Brake Bleeder"

@justleon721

Жыл бұрын

@@theophany1770 You can make a one man brake bleeder with a make-shift check valve just by taping a balloon to the end of a piece of tubing & cutting a slit or two in the folds on the side of the balloon. If you can't picture what I mean, just search "homemade one man brake bleeder" & it should come up.

If you're going to do it, use a turkey baster (or even the spray bottle) to suck all the old fluid out of the master reservoir and refill it with fresh clean fluid. You'll see the difference in colour. Then bleed the wheels until you see the clean fresh fluid come through. Keep topping up the reservoir. The colour in the fluid is contamination.

@ruck-a-tron

Ай бұрын

I did this with one of those pumps from a shampoo bottle. The big ones can pump quite a bit of fluid.

This man deserves a medal. He deserves to be in Guinness world records book. This man deserves a town named after him. This is the smartest thing I’ve ever seen a human being do in my entire life. Thank you sir

@markholroyde9412

Жыл бұрын

You must be mental LOL, silly lapdog, it does it itself by gravity , no need for all that bollox going on..YT mechanics, funny people

@Al_Swilling

7 күн бұрын

He deserves a Guinness. Cheers!

50 years working on cars (shade tree mechanic) and you teach me something new that is extremely useful

This method takes the fear out of bleeding brakes without a helper. Fantastic!

@davidparker9676

Жыл бұрын

This probably works well to get most of the air out of the system, but I wouldn't trust it enough to get it all out. Air at the bleeder is still air in the system that will compress and make the pedal feel softer than if it was properly bled.

@levyan4718

Жыл бұрын

Meh it's so easy to do

Done the same thing only using engine vacuum as a pulling source. Found that I was actually pulling air INTO the brake cylinder. It's designed to prevent fluid from leaking when it's pressurized. When pressurized, the seals in the cylinder hold tight, preventing leaks and operating the brakes. When you pull a vacuum from INSIDE the cylinder (engine vacuum or hand pump) air can slip past the seals easily. If you don't get those air bubbles out you're just making a bad situation possibly worse. Seen these things on the internet before. While people swear they work - and they do work to some degree - they don't do as good a job as is done when the brake system is pressurized from the master cylinder down through the brake tubes and wheel cylinders.

@anthonyh1896

Жыл бұрын

Could it be that manifold vacuum has that problem, but the very gentle pressure difference of a window cleaner bottle just doesn't?

@jonathantheunacceptable4259

9 ай бұрын

Anything more than 5psi of pressure is way too much... I only pump it to 5 and let it sit, eventually will go down as bubbles come up (FYI I attach a fitting to top of master, not caliper) continue until system holds pressure for an hour. This method works on the clutch master as well and is the only way to bleed gm clutches properly

Like you mentioned air is post fluid system. I worked as a brake and alignment monkey for ~8 years on flat rate. To bleed brakes even after caliper or wheel cyl replacement. Gravity bleed. crack all 4 bleeders let them drip until no more bubbles. close them. Two quick jabs on the pedal after they are closed. then start at furthes and crack bleeder. you'll get 2-3 bubbles and then solid fluid. 99.9% of time won't need a buddy or vacuum to bleed the brakes. usually did this while quoting another car. Worked in a few different shops and everyone did it this way. Quick Fast Easy.

@MakerTools

3 жыл бұрын

What about removing trapped air from clutch hydraulics? Same?

This is one of those slap your head obvious solutions...why didn't I think of this myself? Genius, Gerry! Well done.

@timcoppinger3373

3 жыл бұрын

Have to agree. Bloody obvious now. Can’t wait to try it.

@mrdrejonn

2 жыл бұрын

😂

@davidmathew603

2 жыл бұрын

The blue tube

@troublefollows9986

2 жыл бұрын

If the brake fluid is clean already.....should work but if the fluid is dirty rust or other debris....that tiny spray is clogged.

@sydsnott5042

2 жыл бұрын

Couldn't put it better myself.

If you’re doing the 2-person bleed, know that if the cup in the master cylinder piston hits a ridge on the bore, such as accumulated dirt, you’ll be rebuilding it. Use short half strokes, not all the way to the firewall. A block of wood under the pedal may help.

Now that's using your head for something besides a hat rack! Great idea! Thank you, Gerry! Never underestimate the ingenuity of the Irish!

Caveat: Bubbles further up in the lines will take longer to appear using any vacuum method, since they aren't being pushed by the master cylinder piston. This applies more with wheels further from the master cylinder location, which you should bleed first.

@YungEagle3k

Жыл бұрын

When the vacuum is on. Go in and press the brake

@billholt174

10 ай бұрын

As an aside, I like your channel name. 😄We need less attention to the laser pointers and loud noises, with more given to the back door shenanigans that will affect the quality of life of everyone. 😉 People have been fat, dumb and happy for too long, and their complacency, apathy and ignorance are coming to collect. As the saying goes, shit's gonna get real, really soon. I wish we could bleed the social system like a brake system. 😜

@joemendyk9994

8 ай бұрын

@@YungEagle3k should've stayed aside........

@shedrackobuene2521

5 ай бұрын

Must one bleed the car when changing oil? Or top it up

@oldmanevasion

3 ай бұрын

@@shedrackobuene2521 no, just about every 3 years

Thanks for the great tip. You might want to cut about 4 inches off the top of the empty window cleaner bottle and screw it back into the pump head so you have a more comfortable handle.

@rick_.

3 жыл бұрын

Or just stick the hose through a hole in the bottle..

@javorekbg6081

2 жыл бұрын

Damn right idea! :)

@rs_99_

Жыл бұрын

Genius

Today is 9/12/2023...i went to change my brakes and unscrewed the brake fluid line not paying attention..i end up getting air in lines..long story short i used his method and my brakes work amazing..thanks Sir

@thierryds7295

4 ай бұрын

Thank you sir, for your feed back. 👌

Been there and done this. The advice you were given was totally correct, the bleed nipple threads need to be sealed to ensure there are no bubbles drawn through the threads - these bubbles would give an indiction that the brake system still has air in it. or If we stop bleeding because we assume the bubbles are coming through the thread then were are assuming there are no leaks in the brake system. Dangerouse. The way I have cured this problem (for vacum or syphon bleeding) is - * Remove the nipple and get the nipple and the female threads dry. * Apply a thin coat of automotive silicone sealer to the threads on the nipple. * Screw the nipple back in and commence bleeding the brake caliper through the nipple. * When no bubbles in brake fluid coming from the calliper close the nipple. Repeat this process for all remaining callipers. The silicon sealer acts as a an airtight gasket while bleeding and corrosion protection for the threads.

@-Firestorm

3 ай бұрын

pressure bleeding is better, feeds fluid to the reservoir and pushes the fluid through the system so nothing can get sucked in

@lsvej1

Ай бұрын

I've done this method and I prefer it over the old way. Everyone has there preferences there's no right or wrong way. This method is quick and simple no need to get back up and down and checking and pouring or pumping brakes. Thats why I prefer this method!

For the last 50 years I have used a piece of plastic pipe, put a ball bearing in the end and cut a slit at the ball bearing end of the pipe, connect the open end and press the brake, the fluid exits the slit which recloses when pressure is released. To be 100% safe, put the pipe in a bottle and the fluid prevents any chance of air getting in the pipe. Great for one man bleeds.

Holy schnitke Batman! Wow - BRILLIANT!!! That tip alone gets You into My HALL OF FAME Car/Truck Guys Who TOTALLY Changed My Way Of Thinking After Decades Of Not Thinking Outside Of The Box!!!

Yes here is a tip for rusted bolts etc take a empty spray bottle fill with water about 3/4 way up add dish liquid shake well and use it to loosen rusted bolts etc works amazing

This is such an awesome and easy way to go about bleeding brakes! Don’t know why I haven’t thought of this, I did it today for two new calipers and it worked just as I hoped. Thanks!

This technique was unheard of for me then I had to try it and all I can say is WOW! This saved me 200 bucks for the moment and the brakes on my Magnum are the best they've ever been! I tip my hat to you my good sir, this helped me SO much! Wish I could shake your hand

40 years doing brakes and never heard of greasing the bleeder valve. Never had any issues. To each his own I guess? Great idea. I will try your spray bottle technic.

Now this is what i call innovation! Allways have to call the wife to pump brakes for some 40 years now. Very frustrating for both of us. And now i have found a solution! This is good news for me. You are a genius sir. Cannot thank you enough. God bless you.

@booogil

2 жыл бұрын

wow....so far it's been 20 years for me, so I can stop calling her now. save 20 years

@matthewmarch8707

7 ай бұрын

I would like to see the look on your wife's face when you tell her she has been replaced by a spray bottle!

@AwakeDude911

2 ай бұрын

@@matthewmarch8707 even better frame a picture of the spray bottle top and put it in the family room next to all the relatives.

Tip: If you wrap the bleeder screw with teflon tape, you will have a tighter seal AND less chance of the bleeder rusting in place.

@user-hh4hc2lt6e

Жыл бұрын

I don’t think you’re supposed to use any Teflon on brake fittings lol.

@larrydrozd2740

Жыл бұрын

@@user-hh4hc2lt6e On the bleeder screws....not the fittings. It keeps them from becoming one with the caliper.

It took a few moments to realize a spanner is a box end wrench. Just the difference between U.K. English and California English. This was an incredible idea. I need to bleed the brakes on my 1981 Mercedes 240d. The calipers were starting to leak and the hose had developed a crack. I replaced everything on the front brakes and next I need to do the back breaks. This was a great video.

This is fantastic. I may try this out, but before I crack the brake line, gonna pump the trigger a few times to get a good vacuum going, see if I can force some fluid out when I crack it.

Holy crap, that was so easy. I do all my repair work on vehicles myself and this is awesome 👌.

Loosen the Brake reservoir filler cap, gravity will move the fluid out from the bleeder nipple with much less air. Let the bubbles settle out along the clear tube. Air will always rise. No need for a pump. Don't let the reservoir get empty.

@tannerfinck4459

3 ай бұрын

So loosen cap and bleeder valve?

KZread has some great videos uploaded by smart people. This is excellent and can't wait to try it out soon when I change the rear calipers on my dad's car

I've been a mechanic for thirty years and I've never seen this. Brilliant.

Excellent! Can't believe how simple and cheap that procedure is. Thanks for that Gerry. 😊

Great video, you are a very likable guy. This break bleeding technique is the smartest one I've seen 👍👏

@HotSpotAction

Жыл бұрын

By far the smartest Its not just showing how to do it But also The best and cheapest solution to make it a 5 minute job for pretty much everyone above 12 years old

You know, it's only a very few times in life where something stops you and makes you think Genius! This is one.

30 years of DIY mechanics, building engines, restoring vehicles and that’s genius! Brakes on my 100HP panda need bleeding after a rear disc change, I’ll try this method...one of those light bulb moments someone had!

@larock-np8zc

2 жыл бұрын

30 years of doing all that mechanics and yet you think this ridiculous spray bottle "genius" hack is a good way of working on your brakes! Instead of using proper pressurising vessel with the gauge and doing the job properly!? That's just sad..

@MattGuzman-ng2yx

6 ай бұрын

​@@larock-np8zc Then wjy in the world would you watch this video?! 🤔

@ihatelols

26 күн бұрын

@@larock-np8zcIt works though, anyone can do it too if low on money etc.

So many years of working on cars and I come up with some pretty handy diy but never did I think of this. So simple yet so awesome. Thank you brother.

I use synthetic grease on the threads if I get air bubbles while bleeding. Do not use thread tape. Also, if you open the bleeder too much, you will create air bubbles. It just needs a tiny turn.

@DarkIzo

3 жыл бұрын

why no teflon tape ?

@johnmilner7603

3 жыл бұрын

@@DarkIzo you don’t want any of that tape getting into the fluid and plugging up the lines. Just use liquid teflon or pipe thread sealant.

Long story short just bought Miracle Gro AA battery powered sprayer in clearance at Walmart for only $2.50! So the “I know I’ll need this feel” is even better when truly works out! Lol

Yes good idea Gerry, but the main reason anyone needs to bleed their brakes is to remove any air trapped in the braking system, you can only be certain all air is removed from the system when no more bubbles exit the bleed nipples, in your demonstration it's wrong to assume the bubbles still exiting the nipple was due to air being sucked through the threads of the nipple, as some of those bubbles could be due to air still in the system. Best way to bleed brake systems is to use the pressurized method at the brake fluid reservoir, this way you get a steady flow of fluid being pushed out of the system, this steady flow is more likely to dislodge and remove trapped air pockets.

Top man Gerry you've definitely helped so many with this cheap effective quick fix, cheers mate.

I pondered this invention more than once without actually trying it. I just made mine using your steps. It’ll remain the single greatest tool in my garage. You Da Man!

@newfie-dean5803

2 ай бұрын

It’s better though to remove some of the old fluid from the master cylinder first and then add new fluid to it. Then as you do this you will see the fluid colour change to be the new clear, bubble free stuff. Then you know it’s air free. If you wanted to change the brake fluid for the entire car, do this starting with the rear passenger wheel first (furthest from the master cylinder) and then move on to the driver side rear wheel, then the passenger side front wheel and then the driver front wheel making sure to add new fluid to the master cylinder before starting each wheel to ensure you don’t run it dry and pull in air. When you do this you will have changed out your entire brake fluid system for new fluid.

I was going to buy a $20 dollar brake bleeder kit that appears in a video on the right hand side of the screen from Harbor Freight. Thanks, you saved me $20.! Thumbs up and subscribed from Folsom California.

This is real left field thinking..Brilliant. Better than pumping the brake which can damage the brake master cylinder seals on much older vehicles. Thanks mate most excellent !

Nice method to get the bulk of old fluid out of the system. I would suggest to a) repeat this 2-3 times and put new brake fluid into the reservoir (before it runs low) to get fresh fluid into the caliper. b) Additonally. Do the 2 man pedal pump/crack open method at least 2-3 times in the end to make sure no air made it into the caliper through the threads (as we can clearly see even with the grease theres a lot of air sucked in through the threads).

Now start that process with the right rear then left rear followed by passenger front and driver front. 👍🏻

Irish ingenuity at it's finest! Thanks Gerry what a fantastic tip.

Man and I was just about to head to harbor freight and buy a break bleeder,thanks for you knowledge sir

Brilliant ! Bloody easier than having to pump the pedal. 👍🏻

I love simplicity that actually works; great job!!!

Wow!!! I have tried several different ways. This by far is the easiest.

Kudos, its a smart way to make sure there is no air bubbles in your caliper or near the end of the lines. But for a whole fluid replacement I would still have someone sitting in the car and pump the brake. Its way faster. Nice vid.

That’s ingenious and a time saver. I’m doing my brakes right now

I love this mechanic wow!I don't need no one to pump up the brake for i,you never too old to learn thanks for this idea boss

I been working on cars for 40 years and I never seen anything like this, excellent video.

You MacGyvered the heck out of that! Stellar idea, or as you say across the pond, very clever!

Sir! Mind blown, I honestly wouldn't have thought of this. Great video!

Amazing. No words. Genius.

I have no words to describe how much I'm surprised by your fabulous method mister. Thank you so much for sharing this great idea with us.

I Just use a bottle and a piece of hose for brakes, but I am DEFINITELY going to try this next time I have to bleed a clutch master cylinder. Thanks for the great idea!

You are thinking on a different level. I LOVE THIS. Thank you!

I tried to bleed my brakes over the weekend using this spray bottle method and there are a lot of little pit falls that were not highlighted.... Like you need to seal the bleeders threads, and you need to remove the master cylinder reservoir cap, and it's a good idea to prime the sprayer with brake fluid first .... long story short, I ended up doing it with a pressure bottle a the reservoir, all done. lol

That is handy to know because 2 people doing the brakes is a pain. Thanks for the tip

Sir with your method, it is getting easier to bleed the brakes... thank u sir.

That's hysterically brilliant!!!

Awesome idea, I also took a 1/2 drill and used it to drill 1/2" hole in center of bottle cap, the spray nozzle fits snuggly, I ran a bead of permatex around the nozzle and cap to seal it, hot glue works well also, then with about two inches of fluid in bottle, for weight, u can use a rubber band to hold trigger compressed, with bottle standing and tubing running in smooth arc, the bottle with cap/nozzle/ rubber band, works well as a siphon to pull fluid thru the lines in a flush situation, so simply use beverage bottle, 1ltr coke I used, sealed cap/nozzle, pump til fluid comes in tubing, use rubber band, no loops, or sags in tubing, and u have a siphon, thanks for the start of a great idea

What i did last week, push the brake pedal 3 to 4 times, and put a piece of wooden board in between the pedal and the seat, went out to bleed....came up really good.

Awesome brother , God and Jesus bless you . 😇🙏😇🙏🤗

I love those simple ideas. Here's one: Buy a standard bottle brush for kitchen glasses, rip off the handle, and tighten it in your cordless drill. Now you can brush out a lot of things quicker with the drill. I even got a small bottle brush for reaching into smaller openings. Enjoy :)

@j-cubsden6603

3 жыл бұрын

I use mine for my cars wheels and other small tedious things I need to clean. It saves so much time

@orchids3332

2 жыл бұрын

Brilliant! I am about to do this to bleed my brakes and I noticed my wheels need a good cleaning. I'm going to use this brush idea if I can find out where I put my drill.

@kevindouglas8768

2 жыл бұрын

@@orchids3332 Thanks. I came up with that one all by myself. The next day I bought 8 brushes at the dollar store. I keep one in each bathroom, one at utility sink, two in the garage... Here's another trick I learned. I had a truck with super scratched glass from sand laying in the track. I took 000 fine steel wool, attached it to a cordless drill, used soapy water.. and buffed the glass to a super fine shine.

@igorpotocnik7231

Жыл бұрын

You can also uset toilet brush for scrubbing bigger objects like wheels? Just break the handle's uneven part off and put the rest in the drill. I saw it on Smart fox YT channel.

@codenamegordieray6541

Жыл бұрын

I will enjoy, I'm over 50 so it's time to do things the easy way 😁😁

Hey Gerry had a problem bleeding front brake on my Kawasaki vn1500, watched your video went out and tried your idea and straight away I had a front brake. Thanks bud keep the videos coming

Ingenious !!!.....only thing I could suggest about this idea would be to make hose long enough to reach the fluid reservoir to add fluid back into reservoir (front brakes only of course lol)

I've always used a mityvac, but this cheap solution is genius.

That was AWESOME!! I've done a lot of brake work over the years and it's such a pain to bleed them by my self until now..

@aviography

3 жыл бұрын

Except the old way builds my thigh and calf muscles each time I did it. :)

@savage22bolt32

2 жыл бұрын

I just put the hose on the bleeder going up, then down into a can, crack the bleeder and wait for the fluid to drain out & bubbles to stop. Gravity does all the work. It takes longer, but you can smoke one cigarette at each wheel. Just don't forget to keep an eye on the master cylinder level!

those bubbles are caused by agitation. took me a while to get it. You have to squeeze the trigger slowly up and down. Similar to pressing the pedal too much causing froth and liquid draining too fast from the master.

Superb bleeding technique using that spray bottle tube.

immensly fantastic brake bleeding DIY... you are a life savor. SUBSCRIBED

It’s always nice to do things and save a little cash especially you know you have to learn to be a one-man army thank you gerry

@GerrysDiy

3 жыл бұрын

Thanks Stephen. This is easy to do and works great. 👍

Outstanding idea!!! Thanks for sharing it with us!

Going to be doing brakes today. This is genius.. sealey one man brake bleeder kits have propably took a huge loss in sales recently thanks to this lol..

this is a new one ive learned from you gerry,, ive gotto do one this week as i have a calaper that has no compression left .,,have a nice summer.

Thank you very much!!!! Smart simplicity is the best choice ever.

Nice, clean , precise way of bleeding calipers. Oh no spills

That is a slick way to save the fluid as well no mess

Great idea, simple and quick. Well done!

@GerrysDiy

4 жыл бұрын

Thanks for commenting. Much appreciated Cheers Gerry👍

Heat up the plastic tubing at the end a little and it'll stretch over your fluid valve, no need for adapters.

@kashmoni1085

3 жыл бұрын

You sell alot of weed😁😁😁

Just got back from doing my brakes. Thanks YT... Definitely trying this next time. Thanks.

Lots of "good idea" claims from folks, but once-in-a-while you hear a really "good idea". This was one! Thx!!! Going to use it on the Harley.

This guy is a genius what a great idea it really came in handy when I bled my brakes by myself bcuz my helper wasn't able to help me. Thx

Great tip thanks i suggest you to remove master cilinder cap so the fluid will flow easier

That's brilliant! Here is a tip someone taught me long ago. Put a pry bar between the brake pedal and seat. Move the seat forward enough to force the brake pedal to the halfway point. This will cause the piston in the master cylinder to block off the fluid ports. This will prevent the master from running dry during repairs, but keep in mind some cars can have their brake lights on even with the key off. So keep the battery charger in mind. Saves time during bleeding.

@eduardomargutti

2 жыл бұрын

It works, very handy for changing brake calipers or flexible likes, only one or 2 drops of fluid comes out.

@hydewhyte4364

2 жыл бұрын

If you're opening the system, why would you not want to do a flush with fresh at the same time? If you're having to change a caliper or flex line, odds are the fluid is done too.

@eduardomargutti

2 жыл бұрын

@@hydewhyte4364 I agree with you, but if you are replacing the fluid as well I think it's better to empty the reservoir from the top and then disconnecting the lines you need to change, note that there will be some drips before the lines empty completely. But In my case I did a complete bleed and flush before I changed the lines. So I used the technique mentioned and it works wonders. If you are replacing the fluid and some lines and you don't wanna take the risk of emptying the master cylinder or getting air trapped in it, you do the bleeding first and then the brake pedal technique after, when changing the lines. Some master cylinders can get the trapped air removed only by disconnecting the output line, specially in motorbikes, and I don't like this.

@igorpotocnik7231

Жыл бұрын

Jus take out the brake lights bulbs out and there won't be closed circuit to drain the battery.

@MattGuzman-ng2yx

6 ай бұрын

​@@igorpotocnik7231 .. or pull tue fuse!

Great Tip! I learned this trick many years ago while I was in the Army.

Wow, can definitely get a cheap spray bottle of good quality. Thanks for the idea!

Thanks Gerry, brilliant as always!

@GerrysDiy

4 жыл бұрын

Glad you enjoyed it

Easy to use, cheap tools, thanks for the tip

Danke Gerry geniale Idee. Gruss aus der Schweiz!

I did that method but for my slave cylinder when I fix my Honda Civic 1997 clutch. Very effective. Thanks for the video.

Great idea. I’ve been doing things the hard way for quite a few years. Thank you.

My preferred method is a circular bleed, get a long piece of 5 or 6mm clear tube, put one end over nipple and the other back into the reservoir ( make a little hook of metal tube to hang there), then pump as hard as you like, gets lots of circulation. Then if your fluid is dirty, just fill the main with fresh fluid and catch the exiting fluid to throw away.

@bertiewooster3326

Жыл бұрын

Nah that puts the bubbles back into your system !!!

@user-hh4hc2lt6e

Жыл бұрын

Yeah this is too much dude that’s like self fellatio

@makingcookingfixing

7 ай бұрын

not if the bottle is above your caliper@@bertiewooster3326

Thanks for sharing. It has surely helped a lot of people n me as well. Keep up the great work. Cheers from Mauritius 🇲🇺

I find it easier to spray horizontally, if you point the nozzle downwards it has trouble to spray after a while. Just spray into bigger bottle which you hold at an angle bottom away from you.

@kiwiingenuity1677

Жыл бұрын

Yeah they are designed that way, so the pickup tube is in the liquid I.e pick up straight down. When you get your ears tuned in ,you can hear the atomized air fluid v straight brake fluid just by the different sound and spray pattern.

use a used shower gel pump. it doesn't squirt. just pump with more volume out. I made one and will try it out soon. shall post a video and the link if its successful.