Stop complaining about the quality of your videos or missing things here and there. Quit complaining about your content not being “good enough”. It’s like every video. Bro we are not worried about it... you could have recorded this with an old ass iPhone and we’d still watch it. It could be a video about putting a radio and intake in your daily or something stupid like that and we’d still watch it because... we like you. You’re the main ingredient. Chill out and don’t be so hard on yourself. You’ll be successful as long as you keep putting out videos frequently. Keep doing your thing, and we’ll keep supporting you.
@hammuffins26453 жыл бұрын
We all know our boy is a welder. When the legitimate first second of the video starts, you can see he has grinding dust all on his face and he has the common welders forehead marks from where his helmets head band sits. I appreciate your hussle!
@KWC03 жыл бұрын
Idk how that fill neck is gonna work based off that angle u made... 🤔 Looks like it's gonna be dumping out of the fill neck on the ground bud🤣
@johnfasano2846
3 жыл бұрын
Shit. I just wrote same comment wish i woulda read first
@andresmichel68563 жыл бұрын
This build is sick. And thanks for documenting it so well!
@BassManBobBassCovers3 жыл бұрын
Holy crap that thing is turning out mint! Always impressed with the fab work to say the lest.
@jcnpresser3 жыл бұрын
Your killing it dude!!!
@matthewmcclintock58063 жыл бұрын
I always put a couple tac welds on my nut certs because there's always atleast that one or two that spins and doesn't let you unbolt it at the worst time lol
@fredmortensen51073 жыл бұрын
Dude what’s going on with the Mazda I want to see that thing rip?!
@wickedmayhem76883 жыл бұрын
That filler neck won’t work very well going back up with that 90. Going to have to fill it ultra slow.
@Metigulous
3 жыл бұрын
Yes, I want to try this first because of where the tire sits in the wheel well I can't go much lower. We shall see how it works
@Neko-uh7cp
3 жыл бұрын
Metigulous it’s going to act like a toilet, fuel wil sit in the filler neck all the time
@BOOSTJUNKY
3 жыл бұрын
@@Neko-uh7cp was my thought soons I saw it
@802Garage
3 жыл бұрын
@@Neko-uh7cp A lot of factory filler necks have a low spot like that too though.
@Neko-uh7cp
3 жыл бұрын
802 Garage probably the ones that don’t fill fast enough and alway turn the pump off from back flow😉
@Anthony-vr3um3 жыл бұрын
so clean i love it
@NitroUnion3 жыл бұрын
Looking good!
@pilot5543 жыл бұрын
Every welder machine watching this is reporting u for weld porn xD Dude your welds are the best on youtube, looks like u always take your time to make it look good and hold. Best wishes, 100k subs is so close man, and tank is lookin great.
@matthewnickolas75093 жыл бұрын
Bro love your build.song at S1 built is my good frend.i just bought my awd transmission for my 04 rsx.can not wait to get all my parts.love watching your channel I like to learn everything I can.an from what I've seen your a amazing welder an great fabricator. Keep it up bro cant wait to see u rippin.#awd rsx # Nickolas mfg.
@lastmanstanding51173 жыл бұрын
Killing it!
@ajsgarage68023 жыл бұрын
Your the reason i bought a tig welder
@shawnrinkel83773 жыл бұрын
Hell yea more vids bro!
@EDWARDTREVEY3 жыл бұрын
I think the Filler neck is going to be clicking off the fill hose every time you try to fill. Just because the down and then up the fuel has to go. The build is going great can't wait to see the rest of this one and then the track.....
@BoostByGearPerformance3 жыл бұрын
Damn we’re gonna have 2 jdm front Integra’s reppin co! One white and one black!
@vintagespeed3 жыл бұрын
dude.....that filler neck is going to hold gas at that up-hill bend and run out over the paint... you can't run a filler up-hill man.
@matthewpostlewait18573 жыл бұрын
Since there is a rise in the filler neck will you not be able to use fuel cans? I dont think it will be able to run uphill.
@stevereinhart40673 жыл бұрын
You the Man
@vincyking33 жыл бұрын
How high does the tank sit in the trunk ? I was thinking if you Lexan the quarter panel window and put the filler neck there
@kemplozano3 жыл бұрын
Hayden you need to link up with Cooper Bogetti, he just got new welding machines ( Tig, Mig) and he said he needs help learning to tig weld. You could spend time in Florida making videos with Coop and check out Kyle’s new place.
@gearhead35003 жыл бұрын
thats actually a good ideal re using the stock gas filler location awesome cant wait till its finish
@okobojian18603 жыл бұрын
Dang getting them out.
@traitorhatergetarope31633 жыл бұрын
I want ti see the first fill up at the pump.... make sure you bring a fire extinguisher 🧯
@jmyd833 жыл бұрын
Broke Neck not Fill Neck 🤣 hope it works been liking you're recent uploads 👍Where's the Mazda?
@skulcandybmx943 жыл бұрын
Isn't the silicone hose not fuel safe?
@cocostacoyalgomas68033 жыл бұрын
Yes nice
@bigcam2503 жыл бұрын
Put a tac weld on each nutsert so they don't spin
@ngk3303 жыл бұрын
I need to find me a budget project.
@peebeegilmore94863 жыл бұрын
So what happens to your rx7 build
@B4Ctom13 жыл бұрын
Its gonna be hard to fill like that. The pump is gonna click and click and not fill.
@zekialfreido3 жыл бұрын
Should have been at fl2k but the build comes first right
@Patric-Kole3 жыл бұрын
You do good work man. But you should really use a bead roller to give your sheet some rigidity. Other than that, good work dude!
@gsxrk-sg7of3 жыл бұрын
What the heck is wrong with just filling it thru the trunk? Lmao. Cuz that fill neck wont work and now there will be a random hole in the trunk
@obezzyjohnson96803 жыл бұрын
There's no damn way that filler neck is gonna work n if it does I wanna see this work wit that 90degree elbow on it going up like dat
@tunatwo-times87353 жыл бұрын
+1 for TEGASUS
@ripnsoar3 жыл бұрын
🙌🙌🙌🔥🔥🔥🔥
@phcllc13233 жыл бұрын
👍
@CarstenMoyer3 жыл бұрын
Ayyyye
@belcebu59073 жыл бұрын
I NEED FULE CELL TO FOR 26 GALONS .THE ONE I GAR IS ONLY 15 I THINK
@ForgedEggs3 жыл бұрын
6 minute gang
@GonzosGarage3 жыл бұрын
It won't let me turn on my "Bell" notification. Says something about content is for kids 🤷♂️
@BadHorsie23 жыл бұрын
Be sure and pull that black foam out of the cell!!!
@DistrictDRIVE
3 жыл бұрын
Why?
@johnfasano28463 жыл бұрын
Yo that gas filler isnt going to work correct you can't excpect the gas to actually go up over the 90 instead of just coming back out the fill, that 90 needs to be removed or adjusted to have less of an uphill
@chicagovasko3 жыл бұрын
M tigz welds 247.
@joshuaparker41173 жыл бұрын
Last time I was this early I caught my wife cheating!!
@belcebu5907
3 жыл бұрын
Wtf 😂😂😂😂
@gullreefclub
3 жыл бұрын
Sorry about that dude but she told me you all had an open relationship and you liked to watch, I am just glad your mom had left before you showed up. 😁
@NajtuWorld3 жыл бұрын
Question of day for ya Im watching your builds from time to time but today i just spotted you have got two different eyes ?_?
@joshdobson27373 жыл бұрын
I understand people have lives and jobs but when are you going to get your RX-7 flagship ready to roll.... you and Kyle Call each other out 2 years ago . .......get your shit done and put a business card on it?
@USN_Ret-3 жыл бұрын
I wonder how chainsaw oil would work in the coupler
@curtish36703 жыл бұрын
Dude you need to make more vids specially all your vids bin so short man. Use too love watching your channel but getting to the point of wanting to unsubscribe
@wheeln24-793 жыл бұрын
Everybody's doing Honda stuff. I'd rather see you work on your rx7. Tired of Honda builds. They're too easy. Show us some work on your car.
@wheeln24-79
3 жыл бұрын
@hangtime 7190 glad I'm not the only one. Builds like this with bolt in awd kits I've seen installed 3-4 times already are just boring to watch. Idk how he can walk past his car everyday. Only thing I can think is he'd rather watch other people race instead of race himself. He'd have to get more massages spending late nights at the track crawling in and out of his car lol
Пікірлер: 67
Stop complaining about the quality of your videos or missing things here and there. Quit complaining about your content not being “good enough”. It’s like every video. Bro we are not worried about it... you could have recorded this with an old ass iPhone and we’d still watch it. It could be a video about putting a radio and intake in your daily or something stupid like that and we’d still watch it because... we like you. You’re the main ingredient. Chill out and don’t be so hard on yourself. You’ll be successful as long as you keep putting out videos frequently. Keep doing your thing, and we’ll keep supporting you.
We all know our boy is a welder. When the legitimate first second of the video starts, you can see he has grinding dust all on his face and he has the common welders forehead marks from where his helmets head band sits. I appreciate your hussle!
Idk how that fill neck is gonna work based off that angle u made... 🤔 Looks like it's gonna be dumping out of the fill neck on the ground bud🤣
@johnfasano2846
3 жыл бұрын
Shit. I just wrote same comment wish i woulda read first
This build is sick. And thanks for documenting it so well!
Holy crap that thing is turning out mint! Always impressed with the fab work to say the lest.
Your killing it dude!!!
I always put a couple tac welds on my nut certs because there's always atleast that one or two that spins and doesn't let you unbolt it at the worst time lol
Dude what’s going on with the Mazda I want to see that thing rip?!
That filler neck won’t work very well going back up with that 90. Going to have to fill it ultra slow.
@Metigulous
3 жыл бұрын
Yes, I want to try this first because of where the tire sits in the wheel well I can't go much lower. We shall see how it works
@Neko-uh7cp
3 жыл бұрын
Metigulous it’s going to act like a toilet, fuel wil sit in the filler neck all the time
@BOOSTJUNKY
3 жыл бұрын
@@Neko-uh7cp was my thought soons I saw it
@802Garage
3 жыл бұрын
@@Neko-uh7cp A lot of factory filler necks have a low spot like that too though.
@Neko-uh7cp
3 жыл бұрын
802 Garage probably the ones that don’t fill fast enough and alway turn the pump off from back flow😉
so clean i love it
Looking good!
Every welder machine watching this is reporting u for weld porn xD Dude your welds are the best on youtube, looks like u always take your time to make it look good and hold. Best wishes, 100k subs is so close man, and tank is lookin great.
Bro love your build.song at S1 built is my good frend.i just bought my awd transmission for my 04 rsx.can not wait to get all my parts.love watching your channel I like to learn everything I can.an from what I've seen your a amazing welder an great fabricator. Keep it up bro cant wait to see u rippin.#awd rsx # Nickolas mfg.
Killing it!
Your the reason i bought a tig welder
Hell yea more vids bro!
I think the Filler neck is going to be clicking off the fill hose every time you try to fill. Just because the down and then up the fuel has to go. The build is going great can't wait to see the rest of this one and then the track.....
Damn we’re gonna have 2 jdm front Integra’s reppin co! One white and one black!
dude.....that filler neck is going to hold gas at that up-hill bend and run out over the paint... you can't run a filler up-hill man.
Since there is a rise in the filler neck will you not be able to use fuel cans? I dont think it will be able to run uphill.
You the Man
How high does the tank sit in the trunk ? I was thinking if you Lexan the quarter panel window and put the filler neck there
Hayden you need to link up with Cooper Bogetti, he just got new welding machines ( Tig, Mig) and he said he needs help learning to tig weld. You could spend time in Florida making videos with Coop and check out Kyle’s new place.
thats actually a good ideal re using the stock gas filler location awesome cant wait till its finish
Dang getting them out.
I want ti see the first fill up at the pump.... make sure you bring a fire extinguisher 🧯
Broke Neck not Fill Neck 🤣 hope it works been liking you're recent uploads 👍Where's the Mazda?
Isn't the silicone hose not fuel safe?
Yes nice
Put a tac weld on each nutsert so they don't spin
I need to find me a budget project.
So what happens to your rx7 build
Its gonna be hard to fill like that. The pump is gonna click and click and not fill.
Should have been at fl2k but the build comes first right
You do good work man. But you should really use a bead roller to give your sheet some rigidity. Other than that, good work dude!
What the heck is wrong with just filling it thru the trunk? Lmao. Cuz that fill neck wont work and now there will be a random hole in the trunk
There's no damn way that filler neck is gonna work n if it does I wanna see this work wit that 90degree elbow on it going up like dat
+1 for TEGASUS
🙌🙌🙌🔥🔥🔥🔥
👍
Ayyyye
I NEED FULE CELL TO FOR 26 GALONS .THE ONE I GAR IS ONLY 15 I THINK
6 minute gang
It won't let me turn on my "Bell" notification. Says something about content is for kids 🤷♂️
Be sure and pull that black foam out of the cell!!!
@DistrictDRIVE
3 жыл бұрын
Why?
Yo that gas filler isnt going to work correct you can't excpect the gas to actually go up over the 90 instead of just coming back out the fill, that 90 needs to be removed or adjusted to have less of an uphill
M tigz welds 247.
Last time I was this early I caught my wife cheating!!
@belcebu5907
3 жыл бұрын
Wtf 😂😂😂😂
@gullreefclub
3 жыл бұрын
Sorry about that dude but she told me you all had an open relationship and you liked to watch, I am just glad your mom had left before you showed up. 😁
Question of day for ya Im watching your builds from time to time but today i just spotted you have got two different eyes ?_?
I understand people have lives and jobs but when are you going to get your RX-7 flagship ready to roll.... you and Kyle Call each other out 2 years ago . .......get your shit done and put a business card on it?
I wonder how chainsaw oil would work in the coupler
Dude you need to make more vids specially all your vids bin so short man. Use too love watching your channel but getting to the point of wanting to unsubscribe
Everybody's doing Honda stuff. I'd rather see you work on your rx7. Tired of Honda builds. They're too easy. Show us some work on your car.
@wheeln24-79
3 жыл бұрын
@hangtime 7190 glad I'm not the only one. Builds like this with bolt in awd kits I've seen installed 3-4 times already are just boring to watch. Idk how he can walk past his car everyday. Only thing I can think is he'd rather watch other people race instead of race himself. He'd have to get more massages spending late nights at the track crawling in and out of his car lol
👍