@AVRAME structural kit 120 going up in Rocky Mountains. Great product to work with so far. Subscribe for more videos on finishing this project. Thanks for the support & God Bless -
Жүктеу.....
Пікірлер: 62
@ItsMeAgain1239 ай бұрын
Too many folks concerned with the camera lens or quality of video. This is a construction video. They are not cinematographers. The other part is the part to focus on…the construction. I would be suspicious if these guys were GQ models with a team of videographers, personally. I found it interesting, guys! Wanna build one of these! I think the land around me would be massively expensive and if I could find some acreage without restrictions, it’d be off grid. Sounds romantic. But a single woman in a heavily snow covered area with dangerous freezing temps at times, may have to ponder that one pretty hard. Until my next life, I’ll keep watching and dreaming!
@IRONHORSEhomes
9 ай бұрын
Well said....except for the part when you said we weren't GQ Models!!
@sarwerahmed Жыл бұрын
amazing project
@Extrmach Жыл бұрын
What a cool project!
@joezen1693 Жыл бұрын
Great vid. Looking to building one also, very insightful
@thetruckersmanifesto3873 Жыл бұрын
I um. My fist A-frame I built, my helper nocked me off the roof. Broke my back, hip, don't remember the fall but coming to, still a night terror to remember.
@IRONHORSEhomes
Жыл бұрын
Sorry to hear that. I know what I’m signing up for, thanks.
@cesarosorio1057 Жыл бұрын
De lujo felicitaciones
@degraham9198 Жыл бұрын
Great music.
@codymcdonald3533 Жыл бұрын
Great work! If only you were located in Northern Wisconsin, currently trying to find someone to build a Avrame Trio 150. Seems like many contractors are scared of “kits”… Any recommendations, could this be a self-build?
@IRONHORSEhomes
Жыл бұрын
Find a way to get your foundation and concrete done by a professional and I'll come out for 2 weeks and erect the kit. You can do pretty much everything from there. Quality contractors shouldn't be scared of kits! If you have construction background or carpentry skills you could get the structural kit erected, otherwise I would not recommend. Hope this helps and good luck!
@Mrcox4214 ай бұрын
Hey did you’re footings call for vertical dowels? Getting ready to build one in Bailey. Thanks!
@IRONHORSEhomes
4 ай бұрын
Yeah you need vertical dowels centered in the middle of your 8" wall to connect footings to stem wall. So if your footing is 16" wide you want them 8" from outside footing form. We usually tie our dowels in place before we pour footings but you can also cut and bend them so inspector sees them and stab them after you pour once your concrete has had time to set up.
@yavuzzengin2112 Жыл бұрын
Do you need permits, Architect , engineer signed & sealed proof drawings etc to built something like that ?
@IRONHORSEhomes
Жыл бұрын
yes
@dustincreager45 ай бұрын
Where in Colorado was this? Looking at the Avrame kits and would love to have some one that has used their kit before doing the construction.
@IRONHORSEhomes
5 ай бұрын
Twin Lakes, CO
@everettepennington5072 Жыл бұрын
If they had regional teams i could see them selling more of these. Id buy one but dont think my local contractor could handle this and or it would cost a fortune
@IRONHORSEhomes
Жыл бұрын
Hopefully we can get to the point where someone buys the product and the company gives me a call to erect the kit (if its in the region) for a lump sum fee. Great product but yeah you have to know what you're doing.
@user-qy1ik1wh1t Жыл бұрын
Maybe next time don't use a fish lense, hard to see and very distracting. Otherwise looks awesome!
@paulhallion82032 ай бұрын
Hi mate, sick videos! how thick are the LVLs for the frame?
@IRONHORSEhomes
Ай бұрын
Thanks, 1 3/4 inch for thickness. I believe they are 14" for width.
@mufasa471 Жыл бұрын
What size of crew and what was the timeline from beginning to end for the Structure and Shell?
@IRONHORSEhomes
Жыл бұрын
2 guys & it took around 60 days from sill plate to last sheet of OSB for roofing. An experienced crew of 4 or more could do it in 2 weeks.
@onlyscience7120 Жыл бұрын
Trio 120 rafters are 32 ft., why not using a full/jointless I-joist (max 43 ft.)?
@IRONHORSEhomes
Жыл бұрын
LVL are the materials sold as part of structural kit for Avrame.
@siddhi4126 Жыл бұрын
what was total cost?
@mathewwhite1302 Жыл бұрын
What size timber is on the main roofs frame
@IRONHORSEhomes
Жыл бұрын
LVL @ 9" is the top of the truss above second floor joist. Believe LVL @ 11" is bottom of truss below second floor
@mathewwhite1302
Жыл бұрын
@@IRONHORSEhomes thanks for the reply mate
@Elon2024 Жыл бұрын
What does it cost to build this if i already have the land without utilities?
@IRONHORSEhomes
Жыл бұрын
depends on a lot of things, including the state you're building in. The exterior interior structural kit costs 149K.
@2feetsolomon Жыл бұрын
Question do they do this in denver or only utah
@IRONHORSEhomes
Жыл бұрын
They ship nationwide I believe. I have spoken with people from Washington to New Jersey
@2feetsolomon
Жыл бұрын
Thank u
@colintalkstech Жыл бұрын
This is awesome, thanks for sharing! Would you be open to sharing who you contracted to build this, and total budgeted build costs that you have estimated (without the land etc.)? We are looking into buying land and building an Avrame trio as well! EDIT: Just checked your profile and it appears you are the builder. Could you share a good email address for me to send you a note?
@Dorchwoods
Жыл бұрын
You're probably looking at roughly 300k to build a trio 100. That's about what we'll be at here in Maine. Not including land or anything
@colintalkstech
Жыл бұрын
@@Dorchwoods that roughly lines up with my calculations. Thanks! Have you started your build yet? If so, are you vlogging it?
@rumitaification
Жыл бұрын
@@Dorchwoods I’m assuming that’s the price including the kit?
@Dorchwoods
Жыл бұрын
@@rumitaification yeah that's including the kit, well, foundation and septic. Prices have dropped a bunch so it's looking like it might be closer to the 250k range at this point
@jennifergarces3473
Жыл бұрын
@@Dorchwoods where in Maine are you building? we are considering an trio 100 in Steuben
@leslieking2546 Жыл бұрын
Is this a pre cut kit?
@IRONHORSEhomes
Жыл бұрын
for the structural yes
@leslieking2546
Жыл бұрын
@@IRONHORSEhomes I've always wanted to build an A frame. I really like this design.
@kayladenette2050 Жыл бұрын
does it come with instructions like ikea ? 🤣
@IRONHORSEhomes
Жыл бұрын
haha It's probably easier to build then some of the stuff Ikea tries to sell!
@iyabomarvel8506
Жыл бұрын
@@IRONHORSEhomes did you use a general contractor? Also how much did it cost to add utilities on the land? And approx how much would it cost for a general contractor to do this and are you able to finance the build with a construction loan?
@IRONHORSEhomes
Жыл бұрын
@@iyabomarvel8506 I am a state licensed General Contractor. We typically charge 12-20% of the overall cost of construction to manage the project. email me at ironhorsecoconstruction@gmail.com for any other questions regarding pricing.
@michaelgardner258111 ай бұрын
Another 3ft you could have had a basement wasted space
@IRONHORSEhomes
11 ай бұрын
Basements are between 8-10'. Saved more than 60k by not doing the basement just in excavation and concrete costs, not to mention what interior finishes, appliances, etc would cost. Adequate space within the floor plan at more than 1500 square feet. Crawlspace still gives heaps of room for storage, etc.
@japa1947 Жыл бұрын
Please take the camera off your head as you turn away from the headache! You can't turn head too fast!
@loading4354 Жыл бұрын
Ngl, the fisheye is bad.
@aviccilostboy1755 Жыл бұрын
JUNK that camera or curved lense, its annoying and skews your view of everything !
The most useless building ever, I'm sorry, but every time you go in one, duck your head. A waste of materials and labor I was in an A Frame of sorts The base was 4 ft high and the frame mounted to that, thus no banging and ducking, nice set up.
Пікірлер: 62
Too many folks concerned with the camera lens or quality of video. This is a construction video. They are not cinematographers. The other part is the part to focus on…the construction. I would be suspicious if these guys were GQ models with a team of videographers, personally. I found it interesting, guys! Wanna build one of these! I think the land around me would be massively expensive and if I could find some acreage without restrictions, it’d be off grid. Sounds romantic. But a single woman in a heavily snow covered area with dangerous freezing temps at times, may have to ponder that one pretty hard. Until my next life, I’ll keep watching and dreaming!
@IRONHORSEhomes
9 ай бұрын
Well said....except for the part when you said we weren't GQ Models!!
amazing project
What a cool project!
Great vid. Looking to building one also, very insightful
I um. My fist A-frame I built, my helper nocked me off the roof. Broke my back, hip, don't remember the fall but coming to, still a night terror to remember.
@IRONHORSEhomes
Жыл бұрын
Sorry to hear that. I know what I’m signing up for, thanks.
De lujo felicitaciones
Great music.
Great work! If only you were located in Northern Wisconsin, currently trying to find someone to build a Avrame Trio 150. Seems like many contractors are scared of “kits”… Any recommendations, could this be a self-build?
@IRONHORSEhomes
Жыл бұрын
Find a way to get your foundation and concrete done by a professional and I'll come out for 2 weeks and erect the kit. You can do pretty much everything from there. Quality contractors shouldn't be scared of kits! If you have construction background or carpentry skills you could get the structural kit erected, otherwise I would not recommend. Hope this helps and good luck!
Hey did you’re footings call for vertical dowels? Getting ready to build one in Bailey. Thanks!
@IRONHORSEhomes
4 ай бұрын
Yeah you need vertical dowels centered in the middle of your 8" wall to connect footings to stem wall. So if your footing is 16" wide you want them 8" from outside footing form. We usually tie our dowels in place before we pour footings but you can also cut and bend them so inspector sees them and stab them after you pour once your concrete has had time to set up.
Do you need permits, Architect , engineer signed & sealed proof drawings etc to built something like that ?
@IRONHORSEhomes
Жыл бұрын
yes
Where in Colorado was this? Looking at the Avrame kits and would love to have some one that has used their kit before doing the construction.
@IRONHORSEhomes
5 ай бұрын
Twin Lakes, CO
If they had regional teams i could see them selling more of these. Id buy one but dont think my local contractor could handle this and or it would cost a fortune
@IRONHORSEhomes
Жыл бұрын
Hopefully we can get to the point where someone buys the product and the company gives me a call to erect the kit (if its in the region) for a lump sum fee. Great product but yeah you have to know what you're doing.
Maybe next time don't use a fish lense, hard to see and very distracting. Otherwise looks awesome!
Hi mate, sick videos! how thick are the LVLs for the frame?
@IRONHORSEhomes
Ай бұрын
Thanks, 1 3/4 inch for thickness. I believe they are 14" for width.
What size of crew and what was the timeline from beginning to end for the Structure and Shell?
@IRONHORSEhomes
Жыл бұрын
2 guys & it took around 60 days from sill plate to last sheet of OSB for roofing. An experienced crew of 4 or more could do it in 2 weeks.
Trio 120 rafters are 32 ft., why not using a full/jointless I-joist (max 43 ft.)?
@IRONHORSEhomes
Жыл бұрын
LVL are the materials sold as part of structural kit for Avrame.
what was total cost?
What size timber is on the main roofs frame
@IRONHORSEhomes
Жыл бұрын
LVL @ 9" is the top of the truss above second floor joist. Believe LVL @ 11" is bottom of truss below second floor
@mathewwhite1302
Жыл бұрын
@@IRONHORSEhomes thanks for the reply mate
What does it cost to build this if i already have the land without utilities?
@IRONHORSEhomes
Жыл бұрын
depends on a lot of things, including the state you're building in. The exterior interior structural kit costs 149K.
Question do they do this in denver or only utah
@IRONHORSEhomes
Жыл бұрын
They ship nationwide I believe. I have spoken with people from Washington to New Jersey
@2feetsolomon
Жыл бұрын
Thank u
This is awesome, thanks for sharing! Would you be open to sharing who you contracted to build this, and total budgeted build costs that you have estimated (without the land etc.)? We are looking into buying land and building an Avrame trio as well! EDIT: Just checked your profile and it appears you are the builder. Could you share a good email address for me to send you a note?
@Dorchwoods
Жыл бұрын
You're probably looking at roughly 300k to build a trio 100. That's about what we'll be at here in Maine. Not including land or anything
@colintalkstech
Жыл бұрын
@@Dorchwoods that roughly lines up with my calculations. Thanks! Have you started your build yet? If so, are you vlogging it?
@rumitaification
Жыл бұрын
@@Dorchwoods I’m assuming that’s the price including the kit?
@Dorchwoods
Жыл бұрын
@@rumitaification yeah that's including the kit, well, foundation and septic. Prices have dropped a bunch so it's looking like it might be closer to the 250k range at this point
@jennifergarces3473
Жыл бұрын
@@Dorchwoods where in Maine are you building? we are considering an trio 100 in Steuben
Is this a pre cut kit?
@IRONHORSEhomes
Жыл бұрын
for the structural yes
@leslieking2546
Жыл бұрын
@@IRONHORSEhomes I've always wanted to build an A frame. I really like this design.
does it come with instructions like ikea ? 🤣
@IRONHORSEhomes
Жыл бұрын
haha It's probably easier to build then some of the stuff Ikea tries to sell!
@iyabomarvel8506
Жыл бұрын
@@IRONHORSEhomes did you use a general contractor? Also how much did it cost to add utilities on the land? And approx how much would it cost for a general contractor to do this and are you able to finance the build with a construction loan?
@IRONHORSEhomes
Жыл бұрын
@@iyabomarvel8506 I am a state licensed General Contractor. We typically charge 12-20% of the overall cost of construction to manage the project. email me at ironhorsecoconstruction@gmail.com for any other questions regarding pricing.
Another 3ft you could have had a basement wasted space
@IRONHORSEhomes
11 ай бұрын
Basements are between 8-10'. Saved more than 60k by not doing the basement just in excavation and concrete costs, not to mention what interior finishes, appliances, etc would cost. Adequate space within the floor plan at more than 1500 square feet. Crawlspace still gives heaps of room for storage, etc.
Please take the camera off your head as you turn away from the headache! You can't turn head too fast!
Ngl, the fisheye is bad.
JUNK that camera or curved lense, its annoying and skews your view of everything !
@aviccilostboy1755
Жыл бұрын
@@IRONHORSEhomes kzread.info/dash/bejne/kYqKq7Fqe7y5kso.html
Do not do that.
@audimaster5000
Жыл бұрын
Do it!
The most useless building ever, I'm sorry, but every time you go in one, duck your head. A waste of materials and labor I was in an A Frame of sorts The base was 4 ft high and the frame mounted to that, thus no banging and ducking, nice set up.