AVOID CRACKING YOUR SUR RON X FRAME! DO THIS!
Автокөліктер мен көлік құралдары
A little something I'd recommend as they are cracking out there and some suggestions and alternatives of how you can avoid by possibly going a different route. Also added some others mods and took it out for a little ride. Enjoy!
Пікірлер: 34
congrats on 500 subs man!
@newbeginning2864
Жыл бұрын
ayyyyyy thank you thank you!!
You should consider getting the warp 9 direct mount and stem look it looks so much cleaner without the tube popping out and you can cut it to where it meets the frame. Looks so fresh 🔥 nice bike btw she’s a beauty
@newbeginning2864
Жыл бұрын
I have it already, I install it in this video. Thanks for the positive feedback! kzread.info/dash/bejne/ZoNmmdWro9eZXc4.html
@New Beginning 28 if your Fox forks are going basically all the way up, you definitely need to pump them up, they usually come stock with pretty low air in them, check the valve underneath and the specification to which pump them up to, then set the dampeners to your liking for low and high speed. Let us know how it goes please !
@newbeginning2864
Жыл бұрын
Yep I talk about doing that and adding volume spacers in another video. I'll have a good vid going up on how to tun them perfectly with a new tool when I get a chance to make it.
@davidsoto8307
Жыл бұрын
@@newbeginning2864 Thanks man, it just seemed odd that them fox 40s are bottoming out rather easily and some other people seem to be able to get pretty good air with them, I am saving up myself to hopefully be able to afford them XD.
@newbeginning2864
Жыл бұрын
@@davidsoto8307 Yea, well for one there MTB forks so using the numbers they recommend in their manual will be off so some experimenting needs to take place. It wasn't so bad before until I put the 72v batt in with its added weight. You'll love them, well worth it.
Quickly turning into one of the best builds on KZread! Do you have a link for that mud flap?
@newbeginning2864
Жыл бұрын
Thank you I appreciate the compliment! Have a couple more things left to do that I have in mind and open to suggestions so let me know! Of course, here ya go: www.ebay.com/itm/203858931247?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=hve8byo2tfa&sssrc=2047675&ssuid=&widget_ver=artemis&media=COPY
Nice video everytime man. BeautifuL settup. Do you have a Link with that aLLen tooL?
@newbeginning2864
Жыл бұрын
a.co/d/7V3m7AE
Do you have a link to the part? The ring that prevents the cracking.
@newbeginning2864
Жыл бұрын
surronshop.world/products/steer-tube-reinforcement
That Battery is huge. Ebmx do a 72v 57 ah battery with the electronics on the back. It come with a seat extender to fit. It looks alot neater in the bike.
@newbeginning2864
Жыл бұрын
Yea that's something new they came out with after I purchased the Chi battery. Can't say that I would've gotten the ebmx one over it though as I don't like where it puts the seat at since I'm a smaller fella. I'll be getting a thicker seat which will be more even with the batt looks wise and also am considering getting a second battery which would be the ebmx 72v42ah for when I'm not riding long rides.
@A-aron89
Жыл бұрын
@@newbeginning2864 the 72v 42 ah is the same battery im going to get. Same reason i am pretty short so dont want to sit too far back. I get my sur ron next week so im really keen to start modding
@newbeginning2864
Жыл бұрын
@@A-aron89 Nice, good call on going with that battery and brand. I can highly recommend any of the parts I've gone with in my videos other than the chi battery.
Hope has head set bearings that fits the Sur Ron
@newbeginning2864
Жыл бұрын
I had read they did. Looked around for a bit but on the forum I saw it on there were different part numbers being thrown around. Do you have the part numbers or model numbers they use? Might help someone looking on here trying to figure out an alternative to the cane creek or stock ones.
@melbournechugging2999
Жыл бұрын
@@newbeginning2864 it's ZS 44/28.6 upper ZS55/40 1.5 integral lower 🍻
@newbeginning2864
Жыл бұрын
@@melbournechugging2999 Awesome, appreciate it 👊
Drink when you hear "Freakin".
@newbeginning2864
Жыл бұрын
It's my safe word
@Rushfan74
Жыл бұрын
@@newbeginning2864 Thats "freakin"awesome! Love you bike dude.
@newbeginning2864
Жыл бұрын
@@Rushfan74 hahaha, thanks homie!
i think breaking the frame isnt so easy, with your style of riding i would only be worried about your phone tbh
@newbeginning2864
Жыл бұрын
Oh I wasn't aware you are with me everywhere I ride haha. It's not just the riding style that breaks them..from what I've been told they've been from crashing and having the bike tumble in all odd ways.
If your not gonna show the main topic of your video at the very least post a link of the part!
@slightlyjacked4425
Жыл бұрын
shows it instantly its the clamp that stops the frame from splitting . its on luna cycles.
@newbeginning2864
Жыл бұрын
@@slightlyjacked4425 I don't know if they started carrying it but I bought mine from here. surronshop.world/products/steer-tube-reinforcement
Please get to the point of the video, it is way to long and i have to skip through everything
@newbeginning2864
Жыл бұрын
I show and talk about it instantly.
@therealbojak
Жыл бұрын
He talked about the topic in the title within the first minute of the video. Not sure he could get to the point quicker than that.