Brilliant technology, simple when shown in the video but obviously very, very clever indeed!
@ayudan246882 жыл бұрын
will be using this exact machine on our site soon, fingers crossed!
@pavlochulovskyi28434 жыл бұрын
very handsome TBM operator
@ahmeddesoky32177 жыл бұрын
slurry pump valve was closed at min 5:19 ;)
@paulbenedictborile864710 ай бұрын
nice and friendly user machine
@hancy455 жыл бұрын
cotter disc is broken small machine how to change
@friendfriendly1898 Жыл бұрын
very Good
@user-bq2ys6ve2u Жыл бұрын
👍👍👍
@armandoespinoza4115 Жыл бұрын
How much for this mini TBM all set combo
@delm74414 жыл бұрын
how will you replace cutters during a run if needed, with no access hatch to the cutterhead?
@HerrenknechtAG
4 жыл бұрын
Like all machines smaller then AVN1200 (OD1505), the AVN600 machine does not provide a face access. These machines are too small to provide a face access which is compliant with the regulations. Anyhow with the right choice of the cutting wheel and the associated cutter tools usually the machine is able to build the tunnel w/o replacement of the cutter tools in accordance to the geology and tunnel length. These was shown in thousands of successful finished tunnel projects. Best regard, the Herrenknecht Corporate Communications Team
@delm7441
4 жыл бұрын
@@HerrenknechtAG thanks for the reply. The company I work for recently bought a micro TBM rom Herrenknecht. Its a 1500 if im not mistaken, ive mined a good run with it and it has a hatch to the cutters, thats why I ask. Cheers
@HerrenknechtAG
4 жыл бұрын
Hi, that should be clarify with your Herrenknecht sales or technical contact. If you dont know it, please send us more details at pr@herrenknecht.com and we'll take care. Best regards
@nandakumara268
3 жыл бұрын
How much clearance is there between the hole bored by the machine and the pipe outer diameter?
@HerrenknechtAG
3 жыл бұрын
@Nandakumar A The clearance value depends on the specific project requirements. There is no defined standard, but guidelines. Any specific project you would like to share with us? Please feel free to write us at pr@herrenknecht.com. Regards.
@thelukesternater2 жыл бұрын
Yeah it’s small but daum son how much I want one
@kouroshsalimi20253 жыл бұрын
How to change direction؟
@HerrenknechtAG
3 жыл бұрын
Thanks for your question. Hope you can find more details here on uor product page: www.herrenknecht.com/en/products/productdetail/avn-machine/ Best regards
Пікірлер: 21
Brilliant technology, simple when shown in the video but obviously very, very clever indeed!
will be using this exact machine on our site soon, fingers crossed!
very handsome TBM operator
slurry pump valve was closed at min 5:19 ;)
nice and friendly user machine
cotter disc is broken small machine how to change
very Good
👍👍👍
How much for this mini TBM all set combo
how will you replace cutters during a run if needed, with no access hatch to the cutterhead?
@HerrenknechtAG
4 жыл бұрын
Like all machines smaller then AVN1200 (OD1505), the AVN600 machine does not provide a face access. These machines are too small to provide a face access which is compliant with the regulations. Anyhow with the right choice of the cutting wheel and the associated cutter tools usually the machine is able to build the tunnel w/o replacement of the cutter tools in accordance to the geology and tunnel length. These was shown in thousands of successful finished tunnel projects. Best regard, the Herrenknecht Corporate Communications Team
@delm7441
4 жыл бұрын
@@HerrenknechtAG thanks for the reply. The company I work for recently bought a micro TBM rom Herrenknecht. Its a 1500 if im not mistaken, ive mined a good run with it and it has a hatch to the cutters, thats why I ask. Cheers
@HerrenknechtAG
4 жыл бұрын
Hi, that should be clarify with your Herrenknecht sales or technical contact. If you dont know it, please send us more details at pr@herrenknecht.com and we'll take care. Best regards
@nandakumara268
3 жыл бұрын
How much clearance is there between the hole bored by the machine and the pipe outer diameter?
@HerrenknechtAG
3 жыл бұрын
@Nandakumar A The clearance value depends on the specific project requirements. There is no defined standard, but guidelines. Any specific project you would like to share with us? Please feel free to write us at pr@herrenknecht.com. Regards.
Yeah it’s small but daum son how much I want one
How to change direction؟
@HerrenknechtAG
3 жыл бұрын
Thanks for your question. Hope you can find more details here on uor product page: www.herrenknecht.com/en/products/productdetail/avn-machine/ Best regards
Eddihi mustapha
Am into micro tunnel meintanace need job