AvE Knife clean-up, assembly and thoughts

Тәжірибелік нұсқаулар және стиль

This is the assembly of the knife made by KZreadr "AvE." The "knife" is sold as a "blade holder" and comes in parts that need to be cleaned up and assembled. It is made of stainless steel and titanium parts and is designed to hold a 25mm or 1" snap-off blade.
AvE has a few videos about this knife and the assembly of it. My video shows the clean up of the parts, the assembly, and my thoughts on the knife.
I took a bit more time to clean up the parts than AvE does in his assembly video though the total time was not more than a half hour. I could have taken more time to get a mirror finish, or to make the edges perfect, but I was running short on time, and after all, it's a utility knife; I plan to use it not look at it.
The knife has a nice weight to it and feels very solid. The action on it is rough at first but gets better if you take the time to sand the internals and I assume it will get smoother over time.
A couple things that I noticed that could be improved are that the screws protrude out the back, the edges are not very clean or line up well, and I'd like it if it had a belt clip.
Overall this knife is very nice looking and feels nice in the hand. The push-button action is smooth if you take the time to get it there. It's pretty close to "one-of-a-kind" at the moment but I know my coworkers will be asking me where to get it. The price is steep for a utility knife but taking into account the materials and the quantity being made I think it's worth it.
@arduinoversusevil2025

Пікірлер: 105

  • @peterrenn6341
    @peterrenn634123 күн бұрын

    Who else was shouting "FOCUS YOU F***!" 😀

  • @1pcfred
    @1pcfredАй бұрын

    The finest that can be made in Canukistan.

  • @A_Retired_MSgt
    @A_Retired_MSgtАй бұрын

    Applying a little molly powder with an acid brush helps too. I didn't mind the cost because i like AvEs channel and it was a good way help support him.

  • @paulthompson8613

    @paulthompson8613

    Ай бұрын

    He is such a good story teller

  • @Karaon

    @Karaon

    25 күн бұрын

    a little molly, powder with an acid, brushed teeth and good for the journey

  • @andrewgiles6192

    @andrewgiles6192

    24 күн бұрын

    A little dab'l do ya.

  • @therealidaho6094

    @therealidaho6094

    23 күн бұрын

    The bigger the gob the better the job

  • @craigpreston8260
    @craigpreston826024 күн бұрын

    I bought one too and agree with most of your observations I enjoyed the assembly and cleanup part

  • @flocksbyknight
    @flocksbyknightАй бұрын

    Nice job. Thank you for the review.

  • @lspringerjones
    @lspringerjones23 күн бұрын

    A thing of beauty is a joy to behold.

  • @m5nut
    @m5nut20 күн бұрын

    Just got the email an hour ago to say my knife has shipped, WOOHOO! Thanks for the assembly tips....and only for a second.

  • @Torgo63
    @Torgo6325 күн бұрын

    Great Video, thank you. Great description of how someone who uses these knives often evaluates them. I'm just using it to cut up boxes, and I realize I'm way overpaying, but I don't mind supporting a YT channel that I've enjoyed watching for a long time makes it worthwhile (I have no use for stickers, mugs, etc.)

  • @scofab
    @scofab4 күн бұрын

    I flushed and polished my outer edges too, came out really nice. You can also easily flush the protruding screws too, that's what I did. Finally slightly rounded and polished the corner edges, feels great. Well done and regards.

  • @paulthompson8613
    @paulthompson8613Ай бұрын

    Nice to see one still waiting for my knife

  • @a-yates

    @a-yates

    26 күн бұрын

    Me too😂

  • @alex4alexn
    @alex4alexn28 күн бұрын

    I just got mine, thanks for the video, maybe he will come out with some upprade parts like blade guides for tightness or a belt clip, thanks again for showing us how to do it, cheers

  • @barrylinkiewich9688

    @barrylinkiewich9688

    22 күн бұрын

    AvE's production guy could make the blade spacers from thinner materials to tighten things up but then it runs the risk of being too tight if someone uses a thicker blade or gunk gets built up in there.

  • @81five
    @81five24 күн бұрын

    I like that you gave it a fair shake... it's nice to see constutive criticism without totally bashing.. good video. And yes I like AVE.

  • @therealidaho6094

    @therealidaho6094

    23 күн бұрын

    Absolutely love ave. Could not be more happy seeing an honest tool review. That's the reason we watched ave 2 start with. Good job on your review.

  • @pgtool3047
    @pgtool304726 күн бұрын

    Great clip. Thank you. Would the outside layered edges turn out better if the bulk of the edge sanding was done after assembly? I will try that.

  • @blakemorgan8590
    @blakemorgan8590Ай бұрын

    There is a lot of blade play, i wonder if sanding down the titanium guides a bit would help…kinda risky might make it way to tight.

  • @shavedneon
    @shavedneonАй бұрын

    Just put mine together last Friday, it’s surprisingly skookum. Contemplating some color on the layers.

  • @RandomGuy0987
    @RandomGuy09873 күн бұрын

    I just got mine in the mail, I think of it more like merch but instead of a novelty t shirt its a tool I can use to cut boxes.

  • @travisk5589
    @travisk558922 күн бұрын

    Its like building a model as a kid. You more time that you spend prepping each part before assembly, the better the completed product is.

  • @y0ur_name_here
    @y0ur_name_here3 күн бұрын

    If you have an auto tumbler with appropriate media it will put a perfect finish on the material and save almost all that sanding. I say almost as it will still need fine tuning here & there. Fantastic tool.

  • @wallacegrommet9343
    @wallacegrommet9343Ай бұрын

    When can I buy one at Cambodian Tire?

  • @bgebbq314
    @bgebbq31429 күн бұрын

    She's a beauty anna Bonnie anna joy to behold... said some famous KZreadr somewhere.

  • @aguyinback
    @aguyinback27 күн бұрын

    Graphic illustration of "the other part of the machine shop" that is rarely talked about-Deburring! It's often done by hand and is absolutely necessary to get the fit and finish that is expected of machine parts and assemblies.

  • @nerddub
    @nerddubАй бұрын

    If a couple of shims could make up that blade wobble this would be a nice knife. I like the heavyweight aspect of it.

  • @barrylinkiewich9688
    @barrylinkiewich968822 күн бұрын

    As a laser operator I see things about how this kit was cut that kinda grate against my standards. The cut lead-ins (little divots on the side of the parts) should have been on an inside facing edge or the end of the part and the bridges on the two spacers could have been much thinner for easier cleanup. Speaking of clean up, the operator could have gave the parts a gentle wipe when the slag was hot and it mostly would have brushed off, or refine the cut to reduce how much is produced in the first place. Whining aside, you've done a great job cleaning it up and I love the idea of the knife but these small changes wouldn't have cost any production time to result in a better finished product.

  • @johnnyp5573
    @johnnyp5573Ай бұрын

    +1 for a belt clip and rounding off edges a bit

  • @koga7349
    @koga73494 сағат бұрын

    Is there a 3d printable version?

  • @DuckyFuzzer
    @DuckyFuzzerАй бұрын

    Love mine only thing it needs is a pocket clip

  • @_TraMor
    @_TraMor28 күн бұрын

    The one thing that I wasn't sure about on this is if it could be assembled ambidextrous or not, it seems like it could with the swapping of panels?

  • @fromthebackyard2415

    @fromthebackyard2415

    28 күн бұрын

    I think that would work

  • @richardbarnes4699
    @richardbarnes469925 күн бұрын

    I'm still waiting on mine.

  • @DIRTVENTURE
    @DIRTVENTURE21 күн бұрын

    I’m still waiting on mine to shore up

  • @adamdejesus4017
    @adamdejesus4017Ай бұрын

    @4:23 a couple drops of wiener schleiden definitely helps make it run smooooooth.

  • @mikehunt8968
    @mikehunt896828 күн бұрын

    Hmmm, I have some tungsten disulphide in the workshop, even slipperyer than Molly...

  • @MrM1CHA3L
    @MrM1CHA3L3 күн бұрын

    Still Waiting for mine, in aus

  • @NerdTouchingGrass
    @NerdTouchingGrassАй бұрын

    i sanded mine all the way down by hand... i love the knife but i really hated doing that i need more tools!

  • @krismorey
    @krismorey2 күн бұрын

    I wonder when mine will come, its been a month since i ordered.

  • @fromthebackyard2415

    @fromthebackyard2415

    2 күн бұрын

    Mine took about a month maybe more

  • @colgesuks
    @colgesuks28 күн бұрын

    I got mine is the mail the other day. I'm also going to post a video on my channel. It's not this account

  • @PuppetNerd
    @PuppetNerd18 күн бұрын

    I know he said 4-6 weeks. But did anyone get a tracking number?

  • @fromthebackyard2415

    @fromthebackyard2415

    18 күн бұрын

    You have to get the “shop” app. It’ll notify you when it ships

  • @PuppetNerd

    @PuppetNerd

    18 күн бұрын

    @@fromthebackyard2415 I have it. No updates on this order.

  • @coloradosean2005
    @coloradosean2005Ай бұрын

    Got mine put together too. I am going to peen the screws over on the backside once I make sure I never want to open it again.

  • @lindboknifeandtool
    @lindboknifeandtool24 күн бұрын

    I just learned I had to confirm order number with phone number… I hope I end up with one… I ordered the instant they were available.

  • @NeverMetTheGuy
    @NeverMetTheGuy20 күн бұрын

    I've got a sneaking suspicion that you're going to get quite a few views on this; it popped up, and I'm not even looking for it.

  • @MattHmm-rq6dn
    @MattHmm-rq6dnАй бұрын

    That's a fun knife but for thoes who don't want to spend that much and want a ridiculous heavy sturdy 25mm snap knife look into tajima acm-700c even on board blade storage. Something a little lighter yet still stupid strong tajima ac-700s and it comes in many styles of locks and colors. 👍

  • @barrylinkiewich9688

    @barrylinkiewich9688

    22 күн бұрын

    Those look great, I've got an older Stanley fat max 25mm knife that I love, I wanted to get another but I think it's discontinued so I'll have to hunt down one of these Tajimas!

  • @ccubsfan94
    @ccubsfan9416 күн бұрын

    You could probably overlay random audio from his channel it'd somehow make sense.

  • @electroluxlad
    @electroluxlad23 күн бұрын

    I’m having a problem where I live I can’t find the blades

  • @fromthebackyard2415

    @fromthebackyard2415

    23 күн бұрын

    I’ve never seen them in stores around me. I order them online. 25mm or 1” snap-off blades

  • @Domester101
    @Domester10126 күн бұрын

    Is it the best knife, no. Is it cool as hell, yes. does it make sense, no. But, for all the laughs and education ive received from watching Ave's channel, i bought one immediately. Also, took me about 10 minutes to assemble. Make cool shit and put it on tinternet.

  • @scottsutherland7426
    @scottsutherland742621 сағат бұрын

    Not opening package with chainsaw = major fail

  • @jcoul1sc
    @jcoul1sc22 күн бұрын

    Mine came in bubble wrap, interestingly

  • @bobaverage
    @bobaverage28 күн бұрын

    Something about this AvE blade holder ticks my boxes. Ill just stick with the broke arsed plastic one for the time being.

  • @lazerusmfh
    @lazerusmfh23 күн бұрын

    I prefer a carpet knife personally

  • @gannas42
    @gannas42Ай бұрын

    Why on earth did you sand to such a fine grit? I took mine down to 120 and stopped there.

  • @fitzyholden1036
    @fitzyholden1036Ай бұрын

    Not tea bag.

  • @Convolutedtubules
    @ConvolutedtubulesАй бұрын

    Cool looking paperweight.

  • @davidfrombrisbane1144
    @davidfrombrisbane114426 күн бұрын

    Utility….no.

  • @fireandcopper
    @fireandcopperАй бұрын

    It's a nice little ditty if you want to support the Creator but it's genuinely a bad tool it's better to just buy an olfa

  • @leftyeh6495

    @leftyeh6495

    Ай бұрын

    Did you buy one? Have you held one? 😂 It feels better in the hand than my $35 snap-on. If only I could find 25mm blades. Every store in town has 9mm and 18mm and that's it😢

  • @fireandcopper

    @fireandcopper

    Ай бұрын

    @@leftyeh6495 I know overbuilt when I see it, for the price and actual use, it's not worth it. Exotic blades, I'll stick to the olfa I've had since I was 14

  • @fromthebackyard2415

    @fromthebackyard2415

    Ай бұрын

    I have to order 25mm blades online. I’ve never seen them in stores around me.

  • @Mikel30222

    @Mikel30222

    Ай бұрын

    ​@@leftyeh6495 had the same issue. Lowe's sells OLFA 25mm black blades for 12 bucks for a 10 pack. They fit perfectly.

  • @thedevilinthecircuit1414

    @thedevilinthecircuit1414

    Ай бұрын

    This is not for someone that just wants a knife. It's for someone that likes to work with their hands and have a part in the construction and assembly of a tool that will last lifetimes. Or until you lose it or it gets stolen

  • @soaringbumnm8374
    @soaringbumnm8374Ай бұрын

    AvE cashing in 😂

  • @TheUncleRuckus
    @TheUncleRuckusАй бұрын

    I'd love one, but there is no way I could justify 100 bucks for a razor knife handle. I also thought it was odd there was no pocket clip. I thick it would look good with some chemical/cold bluing.

  • @_JamesBrown

    @_JamesBrown

    Ай бұрын

    I used a pocket clip of a beat up Kershaw

  • @TheHighpotinuse
    @TheHighpotinuse24 күн бұрын

    Thank you for not showing your vice.

  • @gerbil7771
    @gerbil7771Ай бұрын

    Dust collector much. 6:1 fastback all the way for me or a cheap Olfa with the slide lock button.

  • @Monkstameth
    @Monkstameth15 сағат бұрын

    Just a blonde-one o' play at the business end there...

  • @boppins
    @boppins25 күн бұрын

    Looks cool but too much play for me.

  • @A6Legit
    @A6LegitАй бұрын

    Hi AvE

  • @mitchcumstein9808
    @mitchcumstein98087 сағат бұрын

    This type with break off blades are garbage. Not one have I ever owned dies the blade break properly

  • @notajp
    @notajpАй бұрын

    It costs $100 smackers and you have to do a bunch of hand work before you can even assemble it? Fail! I’ll stick with my Milwaukee Fastback for $20…….and it’s not a one trick pony like this thing…

  • @gorak9000

    @gorak9000

    Ай бұрын

    Yeah, kinda backwards. If it's going to require so much finishing work, and is essentially a starting point kit, it's supposed to be cheaper than a ready to go product. It'd be like buying a Chinese digital caliper that's rough and full of grinding dust that needs to be cleaned out and deburred before use, and it cost 5x what a mitutoyo does that's ready to go out of the box... what the fukover??

  • @gorak9000

    @gorak9000

    Ай бұрын

    This is basically just raw laser cut parts that he buys in bulk from China for 5 or 10, and sells for 100

  • @franzkoviakalak6981

    @franzkoviakalak6981

    Ай бұрын

    Point missed.

  • @alex4alexn

    @alex4alexn

    28 күн бұрын

    @@gorak9000 its more for the peope who have been watching his free content for 10 years or whatever who just want to throw a tip in the tip jar, and get a sanding workout haha, i bought one so we will see

  • @lindboknifeandtool

    @lindboknifeandtool

    24 күн бұрын

    It’s a TWO trick pony!

  • @whilomforge3402
    @whilomforge3402Ай бұрын

    Not worth $100.

  • @64Pete

    @64Pete

    28 күн бұрын

    Gotta pay for that Haas somehow.

  • @armandbourque2468
    @armandbourque2468Ай бұрын

    Jesus h. Thats HALF a real knife. Buy the 'knife', then buy the blades? Plus, it's a light duty craft knife, for matt cutting. Almost a toy.

  • @wotnoturbo
    @wotnoturbo27 күн бұрын

    AvE is overrated.

  • @jazzmusiccontinues1134

    @jazzmusiccontinues1134

    22 күн бұрын

    Hey look a contrarian, how unusual in the youtube comments, surely that's their real opinion and they aren't just looking for attention or trying to make someone else as miserable as they are

  • @y0ur_name_here

    @y0ur_name_here

    3 күн бұрын

    Coming from a troll, that's so edgy and insightful.

  • @wotnoturbo

    @wotnoturbo

    3 күн бұрын

    @@y0ur_name_here You don't like my opinion so clearly i am a troll..... let me guess - Democrat ?

  • @choke666
    @choke6663 күн бұрын

    I bought the double bit pencil topper. Badass as all hell! I cant do much with it.. but thats besides the point.🫡

Келесі