Automatic cradle from kerala -DIY
Ойын-сауық
Simple automatic vertically swinging cradle.
Components:
1. Spring cradle : This can be bought from the local market: Make sure to buy the hanger also as shown in the video.
www.flipkart.com/kidbee-baby-...
2. Wheel
www.electronicscomp.com/index...
3. Geared motor (Any of the below)
a. Geared Motor 60 RPM - 12V Low quality www.electronicscomp.com/index...
Clamp for above geared motor : www.electronicscomp.com/mount...
b. Geared motor, 60 RPM - 12V High quality ( recommended ): www.electronicscomp.com/60-rp...
: Clamp for the same might not be available in the website. The above clamp can be used with some modifications or you can build your own.
How to build ?
============
This doesn't need extensive electronic knowledge. Just an interest in electronics is enough.
I built this in 2020 for my daughter and I couldn't provide a description for the video then. Watch the video a couple of times. The set up is self-explanatory. I recommend to buy components from the above website.
1. Mounting the motor and wheel under the cot is the tricky part for this set-up. Screw the clamp in such a way that the wheel is aligned close to the cot side.
2. We need an object which has two holes. One hole is to mount a screw on the edge of the wheel and another hole is to tie the rope of the cradle.(stainless steel object attached to the wheel in the video. I found it from my scrap yard)
3. Make a small hole on any point of the edge of the wheel and screw the above object. This object should be freely rotating while this wheel rotates.
4. Remove one spring from the cradle. This is to make sure that the spring action is seamless. You can add the other spring later as your Baby grows (Refer video)
5. Adjusting the rope length is an important step. The swing can be adjusted by adjusting the rope's tight/loose adjustment with the wheel. :)
6. A clip can be added in the rope to immediately remove the cradle from the wheel. (Black object in the video in the middle of the rope)
7. I recommend using the High quality geared motor which lasts long, but we have to build a custom clamp for that. This motor is still with me.
The low quality motor lasted only one month for me. This motor can be easily attached to the clamp with the inbuilt big nuts that comes with the motor.
8. A 12v variable DC adapter can be used to power the motor. Adjusting the voltage plays an important role in the speed of spring action. I have an old DC adapter and the output voltage can be varied from 1v to 12v.
9. Put a safety rope between the spring (A green rope in this video). This will help to hang the baby safely in case the spring breaks. (Elasticity of the spring decreases after some months)
10. Connect these components together, connect the power and place a weight on the cradle to simulate the working. :) .In my case a laptop bag with a laptop was the weight.
11. Once everything works fine, start cradling the baby. Make sure the set-up is 100% safe.
Hope this helps.. Add comments if you have any further doubts or concerns.
Пікірлер: 39
Ooooh my God how will the baby sleep in that horrible sounds, GOD GIVEN TWO HANDS R DER JUST SWING SWEETLY N PUT THE BABY TO SLEEP SILENTLY, ❤
spring cradles are not good for baby as it may cause heart problems due to the up and down motion of the spring.
@eeestudycorner5883
9 ай бұрын
No... its wrong no pblm from experience
@kavyahk160
Ай бұрын
@@eeestudycorner5883 I am using same any problem?
@kavyahk160
27 күн бұрын
@@eeestudycorner5883hi mam will baby addict to this
Wooow I was searching for such machine for my niece❤❤
@Trueman571
6 ай бұрын
Did you proceed with such a horrible setup? Babies might end up in hearing problems or even shaking baby syndrome. Yes, it might look easy on parents, but definitely not good for the developing brain of kids.
Hi All.... I have added notes on how to build in the description section.
@SuperKrish008
Жыл бұрын
Better you upload the demonstration video bro
Danjaur credle
Without spring is good.
How u made
Hi
Can you please make a video on this... How to make the motor... It's really very usefull.. I couldn't understand the description to make that motor... Pls it's just a request fr my baby
@tojikdominic
Жыл бұрын
This motor can be bought from the links given in the description.
Please avoid up down motion as it may cause shake brain syndrome in babies, instead just swing slowly
Spring cradle is not good for babys health .
Online the price is high... I ll try making it in home
@chikkondrarajurj4444
Жыл бұрын
How much sir
Can make video or explanation how did u make this
@tojikdominic
2 жыл бұрын
Hi.. I have added notes on how to build in the description section.
@nagitanafil4610
3 ай бұрын
@@tojikdominicAyuannBaim
Could you please help us with the adaptor link to purchase
@tojikdominic
2 жыл бұрын
I don't find a low cost variable dc power supply online. You can buy it from local electronics shop. Just ask them to provide a 6 volt variable dc adaptor. You can also use your old mobile charger but the issue is you cannot adjust the output voltage. An electronic technician can easily guide you in this.
@tojikdominic
2 жыл бұрын
Else you can buy a 12 v power adapter and connect a voltage variable knob set up at the out put. Local electronic shop can guide you.
@tojikdominic
2 жыл бұрын
You can reach out to me on watsapp here if you have further queries. wa.me/919747389586
Bro engane undakkunne
@tojikdominic
2 жыл бұрын
Description il und bro. Parts details um und.
Moter name please
@tojikdominic
10 ай бұрын
Press 3 dots menu and see description. All details are already added there..
Can u please explain and tell us the products that u used here
@tojikdominic
2 жыл бұрын
Hi.. I have added notes on how to build in the description section.
@vinijeeva1355
2 жыл бұрын
@@tojikdominic TQ.. sorry I haven't noticed that... Great to see u replied 😊
Sir how order this product
@tojikdominic
2 жыл бұрын
I built it myself with couple of electronic components. There are several similar products in internet which you can buy. I will post the links shortly.
@tojikdominic
2 жыл бұрын
kzread.info/dash/bejne/ZKp8sqWLYMyymJM.html&ab_channel=CLASSYFURNITURE
@aneeshavp4058
2 жыл бұрын
Could you pls mention the name of electronic components. It will help ful for all mothers
@tojikdominic
2 жыл бұрын
@@aneeshavp4058 Hi.. I have added notes on how to build in the description section.
Phone Number onnu tharaamo?