AUTO SANITIZER ADVANCED KIT

Тәжірибелік нұсқаулар және стиль

Sanitizer dispenser kit designed using new IR module built on LM567 Tone decoder IC with built in PLL or Voltage Controlled Oscillator.
This IR board avoids interference from Sunlight as the IR signal is modulated and the sensing range is also much more compared to LM358 IR Modules.
The control board is designed using PIC 16F722 IC , pwm enabled.2 presets are provided to control speed of motor and also the ON time of motor.
Very reliable design and effective one.
Buy from :
www.alselectro.com/auto-saniti...

Пікірлер: 93

  • @electronic7979
    @electronic79794 жыл бұрын

    Very good project 👍

  • @parthbekal172
    @parthbekal1724 жыл бұрын

    We are manufacturers of touch free hand sanitisers in Mumbai. From where can i get these chip and sensors in bulk quantity? suggest me some manufacturer of the setup in india.

  • @pradeepgupta1190
    @pradeepgupta11903 жыл бұрын

    I want to make automatic water hand washing machine ( not sanitizer ). I dont want to control quantity of water. I want water let flow till hand is under nozzle. I want to use two container , one for water Other for soap liquid , can i make from your kit ? Is conroller (pic) necessary as i dont want to control quantity of any thing.

  • @raghuannavarapu9982
    @raghuannavarapu99824 жыл бұрын

    This is called subject sir yes it's work properly now

  • @manasray2417

    @manasray2417

    4 жыл бұрын

    &

  • @Projects_Circuits_Boards

    @Projects_Circuits_Boards

    4 жыл бұрын

    I have used this kzread.info/dash/bejne/doiql7Btn5fFZrA.html

  • @Ceneloctronics
    @Ceneloctronics4 жыл бұрын

    what is the range of the IR sensor I need 20cm to 25cm ????????

  • @malayghosh3922
    @malayghosh39224 жыл бұрын

    it is good . i want complete assembled product for testing purpose how much the cost

  • @yogeshsaini2730

    @yogeshsaini2730

    4 жыл бұрын

    Hiii sir... Mere paas hand sanetizer ki puri kit hai... Aap ko jo b cahaheye mere paas mil jayega.. Mob.. 7830226868

  • @bvjelecrotech5545
    @bvjelecrotech55454 жыл бұрын

    please give any ideas to create bottle water dust sesor...

  • @bvjelecrotech5545
    @bvjelecrotech55454 жыл бұрын

    Please give any ideas to create bottle water dust sensor..

  • @akshayrayate5541
    @akshayrayate55414 жыл бұрын

    Are surely we can use moulded dc pump in sanitizer container or tank?

  • @dpraveen519

    @dpraveen519

    4 жыл бұрын

    Y did u get this question ? Does your pump melted?

  • @swaranverma5191
    @swaranverma51914 жыл бұрын

    Pls I wants complete serkits to assembling this product

  • @sudalemuthu8114

    @sudalemuthu8114

    4 жыл бұрын

    8884570727...

  • @AbhishekSharma-dw8fm
    @AbhishekSharma-dw8fm4 жыл бұрын

    So, the basic difference between a 12v dispenser and 24v dispenser is of solenoid only?

  • @pavankejdiwal182
    @pavankejdiwal1824 жыл бұрын

    Sir when lighting get switch on /off my Arduino board get hangs

  • @ankurverma2453
    @ankurverma24534 жыл бұрын

    What should be the input power supply which you connected?(

  • @surajchauhan-ug4fl
    @surajchauhan-ug4fl4 жыл бұрын

    Can you please tell from where i can get this lm567 ir module??

  • @sudalemuthu8114

    @sudalemuthu8114

    4 жыл бұрын

    8884570727...

  • @PardeepKumar-gw5ow
    @PardeepKumar-gw5ow4 жыл бұрын

    Sir please explain the program for giving the timing to sanitiz on hand

  • @OperationAllOut
    @OperationAllOut4 жыл бұрын

    Nice , but one simple question? how many components are from the entire project can be sourced indigenously with out a Chinese tag...

  • @mullapudi0331
    @mullapudi03314 жыл бұрын

    Can this work for gel type sanitizer

  • @arjunkoparde3760
    @arjunkoparde37604 жыл бұрын

    Hello, Are you sure this will work in sunlight. Have you checked outside in daylight. Could you please post a videos of working IR sensor module working in daylight. I am sure it will work in house with little amount sunlight coming but detection range will drastically reduced & it will not be detected in daylight i.e. outdoor.

  • @Projects_Circuits_Boards

    @Projects_Circuits_Boards

    4 жыл бұрын

    I have used this kzread.info/dash/bejne/doiql7Btn5fFZrA.html

  • @k.joshshnarajesh2607
    @k.joshshnarajesh26074 жыл бұрын

    I want borad available

  • @navadeep.ganesh
    @navadeep.ganesh4 жыл бұрын

    What is the use of PIC16FXX there? Is really that 28 pin microcontroller necessary?

  • @raghuannavarapu9982

    @raghuannavarapu9982

    4 жыл бұрын

    Not that much needed unless u want to increase the cost if u want go for pic 10 f family

  • @vamsidanda

    @vamsidanda

    4 жыл бұрын

    @@raghuannavarapu9982 or you can go for OTP mcus that cost only 10% of the PIC16F..

  • @arvindaditya19
    @arvindaditya194 жыл бұрын

    At 1.35 min u are telling not sensitivity to sun light I made a prototype in that I placed the model on white table ,the sensor is triggering repeatedly and pumping water .how to fix it? What is the issue on placing on white surface

  • @dhaivathareeswaran

    @dhaivathareeswaran

    4 жыл бұрын

    You have used or sensor. It sensor will work on day light. That means it will operate in the presence of lights. That's y you are getting triggering always and pump will on and off

  • @karuppusamynataraj1954
    @karuppusamynataraj19544 жыл бұрын

    Hai sir..,Am using tone director but sensing time was 5 volt to 0 output how use sir please .... Reply...

  • @sandipshastri5487
    @sandipshastri54874 жыл бұрын

    Please price of this kit and pump

  • @prashantchavan9774
    @prashantchavan97744 жыл бұрын

    Price pls all kit its urgent

  • @yogeshsaini2730

    @yogeshsaini2730

    4 жыл бұрын

    Hiii sir... Mere paas hand sanetizer ki puri kit hai... Aap ko jo b cahaheye mere paas mil jayega.. Mob.. 7830226868

  • @ashishsavaliya6352
    @ashishsavaliya63524 жыл бұрын

    Which MOSFET use for 24 and 12 v

  • @yogeshsaini2730

    @yogeshsaini2730

    4 жыл бұрын

    Hiii sir... Mere paas hand sanetizer ki puri kit hai... Aap ko jo b cahaheye mere paas mil jayega.. Mob.. 7830226868

  • @VIJAYK_54321
    @VIJAYK_543214 жыл бұрын

    Sir can i use this circuit with ultrasonic sensor. If it is possible than programme your audrino board with ultrasonic sensor and send me with diagram then I will connect all parts of material and make a automatic hand wash dispenser. Plz reply me asap.

  • @VIJAYK_54321

    @VIJAYK_54321

    4 жыл бұрын

    If I use these circuit, can i set a liquid dispense time.i.e. 1.5 seconds to 3 seconds off in one time again we put hands in front of sensor it works for next max 3 seconds only

  • @johnson7906
    @johnson79064 жыл бұрын

    How much cost... I want 10 piece

  • @ibrahimibrahim9854
    @ibrahimibrahim98544 жыл бұрын

    Sir where can I bay this boards ? I am chennai

  • @sudalemuthu8114

    @sudalemuthu8114

    4 жыл бұрын

    I have 8884570727....

  • @yogeshsaini2730

    @yogeshsaini2730

    4 жыл бұрын

    Hiii sir... Mere paas hand sanetizer ki puri kit hai... Aap ko jo b cahaheye mere paas mil jayega.. Mob.. 7830226868

  • @tulsiramparihar8240
    @tulsiramparihar82404 жыл бұрын

    SIR how to connect with AA battery ??

  • @buddhimaamarasinghe9997
    @buddhimaamarasinghe99974 жыл бұрын

    How to buy IR LM567 KIT please send link. Thanks.

  • @SaravananAL

    @SaravananAL

    4 жыл бұрын

    www.alselectro.com/auto-sanitizer-control-kit.html

  • @ANOOPGDON

    @ANOOPGDON

    4 жыл бұрын

    @@SaravananAL contact numbr pls

  • @buddhimaamarasinghe9997

    @buddhimaamarasinghe9997

    4 жыл бұрын

    Thanks lot sir.

  • @Teckbhan
    @Teckbhan4 жыл бұрын

    Sir please add timer cut off

  • @BABATECHNICALKNOWLEDGE
    @BABATECHNICALKNOWLEDGE4 жыл бұрын

    Plz sir upload circuit diagram and code

  • @k.joshshnarajesh2607
    @k.joshshnarajesh26074 жыл бұрын

    250 nos

  • @Projects_Circuits_Boards

    @Projects_Circuits_Boards

    4 жыл бұрын

    I have used this kzread.info/dash/bejne/doiql7Btn5fFZrA.html

  • @amansinghsolanki7715
    @amansinghsolanki77154 жыл бұрын

    Price of this kit and where i can buy this

  • @yogeshsaini2730

    @yogeshsaini2730

    4 жыл бұрын

    Hiii sir... Mere paas hand sanetizer ki puri kit hai... Aap ko jo b cahaheye mere paas mil jayega.. Mob.. 7830226868

  • @RK-kh6fi
    @RK-kh6fi4 жыл бұрын

    Plz sir upload circuit diagram and all parts list

  • @samueldinesh
    @samueldinesh4 жыл бұрын

    what is the price

  • @abalasubramanyam9887

    @abalasubramanyam9887

    4 жыл бұрын

    What is price of pcb

  • @sudalemuthu8114

    @sudalemuthu8114

    4 жыл бұрын

    @@abalasubramanyam9887 8884570727...

  • @terracegardnerdeshrajsingh7550
    @terracegardnerdeshrajsingh75504 жыл бұрын

    Hi What is the pcb cost.

  • @yogeshsaini2730

    @yogeshsaini2730

    4 жыл бұрын

    Hiii sir... Mere paas hand sanetizer ki puri kit hai... Aap ko jo b cahaheye mere paas mil jayega.. Mob.. 7830226868

  • @Projects_Circuits_Boards

    @Projects_Circuits_Boards

    4 жыл бұрын

    I have used this kzread.info/dash/bejne/doiql7Btn5fFZrA.html

  • @rajendrasrivastava2692
    @rajendrasrivastava26924 жыл бұрын

    हमे ज्यादा संख्या मे बोर्ड चाहिये रेट व पता कैसे आयेगा विवरण भेजे

  • @Projects_Circuits_Boards

    @Projects_Circuits_Boards

    4 жыл бұрын

    I have used this kzread.info/dash/bejne/doiql7Btn5fFZrA.html

  • @zakhirhussain6238
    @zakhirhussain62384 жыл бұрын

    Sir, What is the kit price pls.

  • @SaravananAL

    @SaravananAL

    4 жыл бұрын

    you can order from www.alselectro.com/auto-sanitizer-control-kit.html

  • @yogeshsaini2730

    @yogeshsaini2730

    4 жыл бұрын

    Hiii sir... Mere paas hand sanetizer ki puri kit hai... Aap ko jo b cahaheye mere paas mil jayega.. Mob.. 7830226868

  • @suneilnevgi8386
    @suneilnevgi83864 жыл бұрын

    Sir pl cut down the price of board from 650/- to 350/- for bulk

  • @Projects_Circuits_Boards

    @Projects_Circuits_Boards

    4 жыл бұрын

    I have used this kzread.info/dash/bejne/doiql7Btn5fFZrA.html

  • @monupal827
    @monupal8274 жыл бұрын

    Good

  • @betkingrocky5103
    @betkingrocky51034 жыл бұрын

    Sir. Want this kit how I get it

  • @SaravananAL

    @SaravananAL

    4 жыл бұрын

    www.alselectro.com/auto-sanitizer-control-kit.html

  • @falgunkhimasiya2531

    @falgunkhimasiya2531

    4 жыл бұрын

    Want to connect for a project

  • @srinivasaraomeesala972
    @srinivasaraomeesala9724 жыл бұрын

    Price?

  • @yogeshsaini2730

    @yogeshsaini2730

    4 жыл бұрын

    Hiii sir... Mere paas hand sanetizer ki puri kit hai... Aap ko jo b cahaheye mere paas mil jayega.. Mob.. 7830226868

  • @jayakumarramakrishnapillai6180
    @jayakumarramakrishnapillai61804 жыл бұрын

    Sir price

  • @munirhandicrafts4497
    @munirhandicrafts44974 жыл бұрын

    Sir i need this kitt in bulk order

  • @yogeshsaini2730

    @yogeshsaini2730

    4 жыл бұрын

    Hiii sir... Mere paas hand sanetizer ki puri kit hai... Aap ko jo b cahaheye mere paas mil jayega.. Mob.. 7830226868

  • @Projects_Circuits_Boards

    @Projects_Circuits_Boards

    4 жыл бұрын

    I have used this kzread.info/dash/bejne/doiql7Btn5fFZrA.html

  • @dheerajanand8267
    @dheerajanand82674 жыл бұрын

    Kitne ka milega ,please rate

  • @yogeshsaini2730

    @yogeshsaini2730

    4 жыл бұрын

    Hiii sir... Mere paas hand sanetizer ki puri kit hai... Aap ko jo b cahaheye mere paas mil jayega.. Mob.. 7830226868

  • @dhaivathareeswaran
    @dhaivathareeswaran4 жыл бұрын

    Logic is not complete. The motor continuous ON untill you remove the hand. That means there is no off delay.

  • @Projects_Circuits_Boards

    @Projects_Circuits_Boards

    4 жыл бұрын

    I have used this kzread.info/dash/bejne/doiql7Btn5fFZrA.html

  • @ratsrc
    @ratsrc4 жыл бұрын

    i think this board is too costly near about 700 rs.. with delivery.

  • @yogeshsaini2730

    @yogeshsaini2730

    4 жыл бұрын

    Hiii sir... Mere paas hand sanetizer ki puri kit hai... Aap ko jo b cahaheye mere paas mil jayega.. Mob.. 7830226868

  • @NissiEmbeddedLab
    @NissiEmbeddedLab4 жыл бұрын

    Price sir

Келесі