How to Connect Sensor PNP/NPN with Relay and Motor? II OMRON MY2N-GS II Hand Sanitizer Circuit
Sanitation circuit using PNP/NPN photo sensor with relay and motor pump has been explained.The wiring of sensor can be easily done with OMRON(MY2N) relay and hand sanitizer dispenser. This type of wiring is used in sanitation machine and Hand Sanitizer Dispenser. You can download the circuit diagram using the links given below:
**Circuit Diagram for PNP sensor with Relay and Motor:
drive.google.com/file/d/18ltH...
**Circuit Diagram for NPN sensor with Relay and Motor:
drive.google.com/file/d/1xHef...
For Ordering Sensors, Controllers, Timers, Counter. Buy at Discounted Rates at:
made2automate.com/
(Circuit Diagram also Available for Free)
**********************************************************************************************
**********************************************************************************************
Devices used in video:
1. Photo-electric Sensor/ IR sensor
2.OMRON MY2N-GS (Relay 24VDC): • OMRON MY2N-GS Relays l...
3.24VDC Pump
*********************************************************************************************
For buying Sensors and Relay and SMPS:
Dolphin Device,Delhi
Ph: 9868092093
www.dolphindevice.com
*******************************************************************************************
Follow me on instagram: @sparrow_automates
Link: / sparrow_automates
Some devices in my video are Chinese(due to lack of availability), and i genuinely want to promote MAKE in INDIA Products.
Any Indian manufacturers for Motor, pump and Relay. Mail Your company details at
sparrowsenses@gmail.com
***********I WILL ONLY PROMOTE MAKE IN INDIA***************************
Пікірлер: 283
For Ordering Sensors, Controllers, Timers, Counter. Buy at Discounted Rates at: made2automate.com/ (Circuit Diagram also Available for Free)
brother bhut acha samjhate ho aap.. mere ko in sab chijo me ekdm intrest nhi tha.. but really ab mjaa aa rha h.. or kafi kuch sikh bhi rha hu.
@made2automate
4 жыл бұрын
Bohot khushi hui,Jaan kar.
AWESOME , Thank you ! One of the most outstanding vids on the explanation of the difference between PNP & NPN that I have seen on KZread. Most over explain complicating the understanding even more You were precise & to the point with a fantastic Labs demonstration . Freak'n OUTSTANDING !
You deserve an applause. I am a mechanical GM of a MNC. You have explained the working so clearly; even i could understand without difficulty. You have become my teacher, young guy. Keep going and keep looking very smart. You will be MD of a company someday.
काफी अच्छा काम कर रहा है, बहुत आसानी से आप समजा देते है,
@made2automate
4 жыл бұрын
धन्यवाद,Sir.
बहुत अच्छी तरह समझाया बेटा
Thank you so much h bro main bohot dino se yha sensor k uper video search krrha tha lkin nhi mila my be 3-4 years phle lkin, finally so.. Thanks again bro good job..👌
@made2automate
3 жыл бұрын
Goodluck 👍🏻
Apne language me sikhne me maza hi kuchh aur hai thank you alot
@made2automate
4 жыл бұрын
Ekdum sahi baat,Sir.
Thank you so much sir ab ja kr mujhe pnp & npn ka concept samjh aya.
@made2automate
3 жыл бұрын
You're welcome:)
the way you explain is really attractive ... very helpful
Good one ! Keep uploading more useful videos, they are handy especially for DIY projects
Thank you bhai logon ko Jankari dene ke liye
Very informative and most needed video for sensor applications all time . Keep it up
@made2automate
4 жыл бұрын
Glad it helped!
Nice information, both acha se boll rahahai.
Thank you so much ! Loved the way you patiently explained each and every aspect. 👌👌
@made2automate
4 жыл бұрын
Glad you liked it
Demonstration is very practical
even thanks is not not enough. i also work on some project in Bangladesh on this COVID-19 situation . your sensor based video help me a lot to have idea. great working. keep up the good work.
@made2automate
4 жыл бұрын
Happy to hear from you, Sir.
@jaideepsinghsoin4715
3 жыл бұрын
@@made2automate Brother please make a video on the difference between PNP and NPN sensors with NO and NC types. I appreciate your time and service.
You are really a good teacher. You simplify these complicated things and make it so easy. Thanks for your efforts and keep going.. My best wishes to you. 😊
@made2automate
4 жыл бұрын
Thanks a lot,Sir.
This is the Bestest video on PNP and npn proximity sensor connection sir ..
@made2automate
4 жыл бұрын
Thanks a lot!
@arunvishwakarma6812
4 жыл бұрын
Sir plz make video over yokogawa pid controller ut35a how to do programming in controller
@made2automate
4 жыл бұрын
@@arunvishwakarma6812 I have OMRON PID controller, I will try to make video on it!
@arunvishwakarma6812
4 жыл бұрын
@@made2automate okay sure sir
Super Masha Allah Allah bless you
Thank you bhai . You help me and guided me
Sir thank you Very helpful video.
@made2automate
4 жыл бұрын
I am very happy that it helped!
Loved the content and ur way of explaining things, pls. Continue to do put this kind of content.
@made2automate
3 жыл бұрын
Thank you so much:)
Very good way to explain You are Doing great job Keep doing
@made2automate
4 жыл бұрын
Thanks a lot
This is a treasure ❤️. Great and professional presentation. 👏👏
@made2automate
4 жыл бұрын
Thank you so much 🤗
@pba21
4 жыл бұрын
@@made2automate You're welcome. Mypin load cell (single point) with load attached will be greatly appreciated🙏
Well done Rishab
@made2automate
4 жыл бұрын
Thanks a lot, Sir
Easy Understandable Brother
Masaallah Bhut achcha kaam kar rahe hai janab aap. aur bhut hi saleeke se aur pyare andaz mai .dusro ki madad karne walon ko allah bhut pasand karta hai .Allah khoob tarakki de aapko janab.
@made2automate
4 жыл бұрын
Bohot khushi hui sunke, apne desh ke log aage bade yahi meri ichha hai!
Yr bahut km age ma bahut jyada knowledge ha aapko
You are very young but super in explaining and presenting a project in other words you peel the banana skin and give fruit to eat🙏
Thank u for sound knowledge of sensors Plz make video on inclinometer sensor
Thankyou sir good job expln so good again thanks
I was free and I m starting searching something and I found ur channel ...Bhai u r great one day ur channel will be 1M soon ...
Thank you so much it was so informative please make more video's like this.
@made2automate
3 жыл бұрын
Thank so much for your valuable opinion. Definitely, I will make more⚡
hats off to you bro love to learn 🙏🙏👏😊
@made2automate
3 жыл бұрын
It's my pleasure
Thank you. asse se Details bole.
*Nice convincing presentation*
@made2automate
4 жыл бұрын
🤝
Bhai mast hua video, nice
@made2automate
4 жыл бұрын
Thanks a lot,Sir
Thanks thanks thanks..
Well elaborated buddy ❤
@made2automate
4 жыл бұрын
Thanks a lot,Sir.
Thanks Rishabh....
Thank you
Good knowledge
Thank you so much sir
@made2automate
4 жыл бұрын
All the best
Thanks
Hello Mr Rishab, Very well explained the connection from Sensor to Relay then to Motor. If you would have carried on explaining how to connect the Solenoid Valve it would have been completed the whole connection diagram.Looking forward to see the connections.THANKS. I have emailed to you yesterday regarding the same issue. KEEP IT UP WELL DONE.
@made2automate
4 жыл бұрын
It's very easy, you have to connect the solenoid valve at the same Connection where the motor has been connected. I hope this clears the doubt.
@vickysouza8858
4 жыл бұрын
To be connected from Motor output to Solenoid Valve then to the nozzle.?Then what about the electrical connection, pls if you can explain to me. Thanks.
@made2automate
4 жыл бұрын
@@vickysouza8858 everything given in circuit diagram in description of video. Simply replace motor Connection with SV and do exact same.
Thanks bro
Good explain
@made2automate
3 жыл бұрын
Thank you,Sir.
Brilliant my little master
thanks dost
Awesome
Sir please tell me ,this item 24 volt but my motor volt 12, so why my motor sating. Thank you.
Good job bro
NE555 Delay Timer Switch Adjustable 0-10 Sec 12V Relay Module touchless hand senitizer mai timer ke tarah use kar sakte hai kya sir ji please bataye sir.
Nice👍
@made2automate
4 жыл бұрын
Thanks ✌
Tnc u so much
Lajawab
Nice
@made2automate
4 жыл бұрын
Thanks
Brother how can i hold the signal of sensor? I'm designing a sanitizer gate using timer relay and ir sensor
V good
@made2automate
4 жыл бұрын
Thanks
Without relay direct motor supply de sakte hain kya
@made2automate
4 жыл бұрын
NO, aise karoge toh sensor kharab ho jaega ekdum se.
@nitin761
4 жыл бұрын
Thanks sir
vi good job......
@made2automate
3 жыл бұрын
Thanks:)
Mast
And what if i use 24 v dc motor with 5 v ir sensor should i use this relay to control or 12 v dc relay can handle for the sanitisation project ?
@made2automate
4 жыл бұрын
5v sensor needs 5v relay. 12v sensor needs 12 relay Relay is just a switch with it you can control any voltage appliance AC or DC
Nice video
I do prefer your Introduction.
Superb aor
Pulses grain pe sence konsa sensor chalega
it can build for gripper concept?
good
Sunlight mai work karega?
How can i use photoelectric sensor in a dusty environment... I am planning to install a photoelectric sensor on top of hopper of a chakki and sometimes i need to grind course powder. So while adding it inside hopper, dust can be seen flying around the hopper. So how can i install sensor on the top as dust may settle on the sensor glass and this will result in inaccurate operation... Pls help me as how can i overcome this issue !
@made2automate
4 жыл бұрын
Very true, this is a major problem in industry with photoelectric sensor. The possible solution is using a capacitive sensor,but sensing range is less but it will work in dusty environment. Try to mount sensor closer to target!
Please make a video highlighting the differences between PNP and NPN sensors with Normally Open and Normally Closed types. Thank you for your great service.
@made2automate
3 жыл бұрын
I have already made : search PNP and NPN Output in sensor
Keep it up
Good 🙂
Great video and amazingly explained. Just had one doubt that why you connected 9th pin of the relay with +ve terminal of SMPS while connecting load?
Brother ek bar connection adapter ke sath samjha dete to 110% clear ho jata..
@made2automate
4 жыл бұрын
Koi baat nhi,agar samaj nhi aae. Toh mai aapko adapter ke saath smjha dunga: mob: 9625356243(whatsapp)
@princeYADAV-ft8yc
4 жыл бұрын
@@made2automate already did
What fantastic work bro .. iam asking if I want to add timer ... Where can I connect it in the circuit?
Good
@bakhttechnicalchannel
4 жыл бұрын
I buy dh48j counter his base was 8 pin his 1.3 pin cp pin. the pin show 3v DC .I want a sansor for this counter . replay and guide me
I want see a double relay and double sensor for exit and entry and see the connection relay delay circuits diagram.
❤️ like 👍 good super bro ❤️ very super👌❤️ like super good
I want to run the motor with vfd ,sensor and relay card
Sir, if the PIR /microwave sensor having relay n timer inbuilt already then can we connect motor directly...will it work properly?
@made2automate
4 жыл бұрын
This system does not have a long life, trust me I have tried and tested
@jayantapurkayastha1565
4 жыл бұрын
@@made2automate Thanks for your prompt reply...I don't have a strong electrical educational knowledge...though you have explained quite in detail in your videos...but sir I need a little more... If you haven't any problem...for a 'Sanitizer tunnel' n 'hand sanitizer' unit can you please listed the each n every electrical components with technical specifications n circuit diagram ready for the technicians... Don't mind actually I need a ready-made list as such I can buy these items without any confusion from market. I know,am expecting a little high... hopefully you will extend your hand for help... My wtsup no. is 9435093933... Thanking you again
@made2automate
4 жыл бұрын
@@jayantapurkayastha1565 kzread.info/dash/bejne/i6t6mdCil7K-mbw.html Please see my recent video for Electrical devices needed for making a tunnel
Bro could you please help me with the 12v Dc pump and 12v relay. Which type sensor can i use
@made2automate
4 жыл бұрын
Use the same sensor shown in video.
Hello Rishabh Good Project just need know which smps you have used with capacity 12v/24v
@made2automate
4 жыл бұрын
I used 24DC smps with 4.5 A rating
Bro I want to make car bell switch,.when my car is come on my home gate .I push my car horn and my gate bell switch automatically on with my horn. Is it possible , which type of siensor is use for this project
@made2automate
4 жыл бұрын
You need a sound Sensor for your application you said. But I have a better solution, use a sensor at the gate and when car reaches at the gate it detects the car and switch will automatically will turn on
@gaganenggtoolstome431
4 жыл бұрын
@@made2automate sir but this happens with all cars that reach at gate But I want to do. like same two sensor ( that detact only each other) is use. Is any sensor like this type available in the market?
Can we get 230 volt direct output
Hi... approximately how much will a 2meter range Sensor cost? Also there are inductive, capacitive type sensors so how do we choose and which one is better?
@made2automate
4 жыл бұрын
2 meter, single IR sensor doesnt come in market. (This is my gaurantee) To sense more than 1m you can use these types of sensor: *Through Beam sensor *Retro-Reflective sensor
@rampr4225
4 жыл бұрын
@@made2automate Thank you for the valuable information 🙏👌👍
Isme Sensor kr samne object Ane par motor ko off karna ho to keshe kare?
thanks for explain, But any motor correct to use or what type motor correct to use
@made2automate
4 жыл бұрын
Use RO pump 24VDC
White wire connect for what purpose??
White wire kis liye use ki sir
Sanitizer tunnel me analog timer (selec) company ka me sensor or motor ka connection kese karen batayen
कोई movie करने वाला part अगर रुक गए हैं, उसी को integrate करने के लिए, कौन सा sensor लगाना है ? आप बताएंगे?
Pnp sensar available na hoy to npn sensar vapray to aeno dryagarm batavo
and bro yeh smps box ke begar bhi ho sakta hai kya sirf relay se
@made2automate
3 жыл бұрын
Use a simple adapter
good mornig
E sob spare & parts kaha milega thora sa side de do,kiu ki amazon me nehi mil ra hai.
@yogeshsaini2730
4 жыл бұрын
Sir aapko humare paas puri kit mil jayegi... Mob.. 7830226868
3 wire motor may kya karega
sensor supply 24 volt से ज्यादा volt supply के भी sensor आते हैं क्या, तथा A C supply के भी आते हैं क्या, कृपा करके बताऐं
@made2automate
4 жыл бұрын
Yes aaten hai 220vac ke sensor
@yogeshsaini2730
4 жыл бұрын
Yas... Aate hai... Or aapko humare paas mil jayenge...