Auto Body Repair: Pull on a 2005 Ford Focus
Interested in auto body reconstruction? Take a look at the skills you can learn at the Auto Body Collision Technology program at Dakota County Technical College in Rosemount, Minnesota. Here, we have second-year student Chad Stigsell with Instructor Gerry Rainford describing a pull they are doing on a 2005 Ford Focus. To learn more about DCTC's Auto Body programs, visit: www.dctc.edu/academics/program...
Пікірлер: 104
This student will never be unemployed. He is learning a valuable and useful trade.
@eliaquinangeles6413
2 жыл бұрын
He isn't learning safety ways of how to operate the frame machine this lesson was so unsafe.
Impressive demonstration. The instructor and student both did an excellent job.
Can you show how to pull out a section of a rear passenger quarter panel by the lower part of the rear door I want learn how to make a successful pull on my own to repair my car thank you love the video
Doesn't repairing that rail weaken that rail or how do u get structure and strengthen it
Nice thinking dears
Nice tools !!!
Where can I buy those pulling clamps?
How much is coast that frame machine with Diacnostic
Crush zone is kinked and torn, the rail is done. get it straight and cut. Weld in the new one in days time.
I don't have a machine I have a strong tree and thats what I use 🤣🤣🤣
Arthur tussik is king at rebuilding weecks
Arthur Tussik's watching this and laughing at both of them
@omarhore6272
4 жыл бұрын
جيد
@nowhereman6945
4 жыл бұрын
Rumen H. These 2 guys perfectly showing the public as the best of clowns... dont know what theyre doing .. a simple kink and tiny torn ... they would confuse and misled viewers
@nowhereman6945
3 жыл бұрын
Shut up , youve been on that stage as a beginner just remember your good and shitty days
2 to 3 weeks .. what u only work on the week end??
@frankboykin3940
3 жыл бұрын
Smh I would hope 2 to 3 days smh
I had to scroll down to see the shit talking comments for this one haha
whats the name of the clamps on the chassis
@hxhdfjifzirstc894
3 жыл бұрын
Chassis clamps
Who honestly loves this measuring machine... Velocty < Car-Oliner...
@collextoys
4 жыл бұрын
car o liner is better we have a velocity it just sit there and no one uses it . I like it better for full frames though, because it moves with the car in stead of working off a bridge.
Сенгкю 👍👍
75 x40 is 3000 x 3 weeks 9000k car work only 1200 usd
Interesting, why not cut the damaged part off and weld on a new piece? Is'nt the integrity of the metal where it collapsed compromised?
@robii387
3 жыл бұрын
That is what I was thinking. If the frame rail is kinked or torn it must go.
@JuanYRuby1209Marine
2 жыл бұрын
I'm guessing, it's an option wich welding might cost more than just pulling
A frame was bent due to hit in the rear, trunk doesn't close. Can it be straightened by pulling by that frame with another car? Thank you for the informative film.
@omarhore6272
4 жыл бұрын
Yas
👍👍
I would of done replaced it
How much does something like this cost? I need to get a frame straighten on a car.
@sresto1
4 жыл бұрын
MrOldeastdallas same question here
PS you shouldn't have your hand on the chains
This video should have been approved by a Chief frame tech..
The worst part is ordering parts because 9 out of 10 parts will come damage.
Who oh why does the 10 thousand pound quote always pop up... If it is not my rig is 50 thousand pounds etc lol The handle of the hammer is too long you need to be using a block of wood and stand back then bash it....
OHSA would have a field day.
While they were talking I wouldve had that car pulled and putting it back together....
If that clamp on the right slips off he’s directly taking a shot to the knees with a 5 pound clamp
All you need is on the job training companies need to get back to that
✌✌✌✌✌
Looks like it's his first day at the frame machine for being an apprentice..
Arthur tussik is a true oid school craftsman he would run rings around all of these so called 'techs' way too much time to get that job out the door.time is money,s safety first.
All the parts on site , I ll hand that car to my paint guy in 8 hours .. 2-3 weeks for what ?? 😀😀
@UshouldTryReality
4 жыл бұрын
Paint is included in the 2 weeks and he is a student working @ school not all day! Everyone is a hero in the comment section!
OMM
Colin Farrell was an auto tech before becoming an actor
u know what u doin or what
Poor Chad.
Guys with a Oak tree and a Harbor Freight chinesium chain laugh at these guys.
This set up is so unsafe it's ridiculous. Using the wrong chains, hooks and no guarding. A technical school teaching unsafe practices such as this is unfortunate. The rigging is not used for dynamic variable loads. The guy hitting the hammer on the load and having his head near the line of fire if the chain brakes creates is a major safety hazard.
@spinhotmotors3081
Жыл бұрын
your right
@MarkInLA
Жыл бұрын
Though I see your point, I really don't think those chains or the bolts/other linkage is going to snap and fly in the air... This stuff looks like it could hold King Kong !!
2 weeks at the school. Not in real time. Course at least in omaha,Ne is 3 hours long, one night a week,at night. And most is book work first. Just wanted to lay that out there because all these complainers are forgetting that it is a school. 6 hrs for frame repair is about right. For that repair.
I can’t believe what I’m seeing that rail is not repairable 😳
@spinhotmotors3081
Жыл бұрын
you must be new comer in auto repair
@davidaguirre6614
Жыл бұрын
you got to straighten it before you can replace it
That rail is NOT repairable.
@lewiscollins1045
5 жыл бұрын
It's fucked...
@dvk578
4 жыл бұрын
I was thinking the same thing, but I am a noob so I was going with the flow. I figure once it starts tearing like that it has to be replaced. Can they weld the tears?
i do that job in 5 day complete repair fixing and paint
@robcrissinger776
4 жыл бұрын
My my aren't you proud of yourself... Were you that fast your first time tearing down , setting Datums , fixing the frame, rebuilding the a/c, replacing Panels, priming, painting I highly doubt it ahole....
That repair should take about a week, that’s including working 10 plus others car also
@alimightytaco8443
4 жыл бұрын
Jonathan Olsson plus waiting on parts lol
@nowhereman6945
4 жыл бұрын
Jonathan Ollson hahahahaha,that was funny
That is dangerous 1 and 2 I don’t really believe that is going never be the same ever again once the metal is damaged you’ll never ever gonna get it 100% straight but for educational and training purposes 👍👍
new metal please. You gotta Focus on the metal.
Used some heat U guys are not very experience and its scary to see u work .
@bstevermer9293
5 жыл бұрын
damian ramdass Did u miss the point of it’s a school??
@scarjd95
4 жыл бұрын
you could not use heat on high strength to straighten it
@alimightytaco8443
4 жыл бұрын
Scar JD right lol just gotta replace it now
@Jasonshepard2
3 жыл бұрын
They’re not supposed to be grabbing the chain while pressure is applied
Your hand on the chians is a big no no bro.. you coach should be correcting you
They have no safety gear on, not covering the chains with safety blanket, and they are standing so close to all that pressure... If the chain snaps smh
@keithclark486
Жыл бұрын
What about taking 2 to 3 weeks doing the repair? Shouldn't take but 3 days at the most, what do you think?
🤣
Two weeks? lol Thats more then the car is worth.
@mikenismogtr
3 жыл бұрын
The parts are already checked in and ready, car will be done in two weeks? i can make enough money to buy that focus in 2 weeks
Typically if you got damage to your intake, a/c compressor, alternator or whatever other "deeper" component, then that unibody is far from being fit for repairs for the usa or Canadian market. Oh, and freon is not used in that car. You chose to be technical in your descriptions, but lack use of proper terminology when it comes to the refrigerant.
@davidaguirre6614
Жыл бұрын
what are you talking about intake alternator are not part of the unibody whatever is damaged in the unibody it gets replaced
Are you kidding me!! Unbelievable!! This must be an episode of the Twilight Zone auto body edition!! Cannot believe that a so called technical college is teaching kids how to completely repair a car THE WRONG WAY! That rail is DONE. You don't weld tears and hammer and dolly sharp kinks in frame rails!! What a disaster!
Stop saying ummmm
Rocky and Bullwinkle trying to fix a written off piece of crap to start with.
Dude looks like a bald Colin Farrell
2 weeks 🤣
Самый хреновый оператор
2005 ford focus should be for spare not for repair
Um,,,um....and...um...I have..ah...um..um...um...Bro's, learn how to talk.
What a joke!!!!!
Andate a riparare biciclette non auto
Uhmmm uhmmmm
👍👍