No video

AUTEL MP808 Clear Your CHECK ENGINE LIGHT Plus PROGRAMMING - [Mercedes-Benz S CLASS S500 S550 W220]

#AUTELMP808 #ENGINEDIAGNOSTICS #CHECKENGINELIGHT
In this video I'll walk you through some of the programming features for the Autel MP808. This scan tool is great for anyway who owns a luxury car, especially the Mercedes Benz. I believe it's a must have if you own the Mercedes S Class S430 S500 S550 W220 W221 and W222. Specially if you want to clear your check engine light. This video is quite long so I've marked off the sections of the video that are might interest you the most which are listed below with timestamps. Thanks for watching!!
_________________________________________________________________________________________________
▶🔔Please like and SUBSCRIBE + Turn on Bell Notifications🔔 Thanks!
▶💲 Show Your Support By Clicking On The "Thanks" Button Below This Video
▶💲VENMO: account.venmo....
▶💲 PAYPAL: www.paypal.com...
▶TWITTER 🐤: / garage_dynamics
▶FACEBOOK: www.facebook.c...
_________________________________________________________________________________________________
🛒 Amazon
Autel MaxiPRO MP808K Diagnostic Scan Tool: amzn.to/3jRj4Qm
🎦Video Equipment Used For Videos
▶Main Camera: amzn.to/3XPXiz6
▶GoPro: amzn.to/3XJXgsG
▶Wireless Microphone: amzn.to/3H1bBLu
▶Microphone (Voice Over): amzn.to/3UgMdnS
▶Camera Microphone: amzn.to/3irXaG2
▶Dead Cat: amzn.to/3OSfLXJ
▶Tripod: amzn.to/3AZlqWn
▶C Stand: amzn.to/3GYgcOv
▶Lights: amzn.to/3UrPalA
▶Light Stand: amzn.to/3in5c2R
Suspension Programing: 6:00
Suspension Calibration: 9:40
PSE- Pneumatic Pump Programming: 16:03
Transmission Programming: 27:14
Engine Diagnostic Features; Fault Codes (DTC): 33:13

Пікірлер: 32

  • @Sabzilatv
    @Sabzilatv3 ай бұрын

    Great channel !! with no scan tool can you set the lumber to zero on the seat and will that also make it not active? also by blocking the outlet pipe on the pump that goes to the lumber stop it from using that line?

  • @keepitsimple7042
    @keepitsimple7042 Жыл бұрын

    That's what i call it a full review, thanks for sharing, i was confused which model should i buy a DS808 or MP808 and now I'm going with the latest MP808S which is the 2023 version of Autel Maxipro version of MP808, thanks to you sir! Cheers from Saudi Arabia 👋🤍

  • @chrisparker8539
    @chrisparker85392 жыл бұрын

    I don't know what this is but it looks cool!

  • @GarageDynamics

    @GarageDynamics

    2 жыл бұрын

    Looking cool is all that matters Chris :D

  • @landonthompson5604
    @landonthompson5604 Жыл бұрын

    Plus if you are programming it's always a good idea to slap a battery charger on it or jump box.

  • @GarageDynamics

    @GarageDynamics

    Жыл бұрын

    Hello Landon Thompson, Yes, very true! Always hook up a battery charger to the car while you're programming 👍

  • @austinbruhn7683
    @austinbruhn7683 Жыл бұрын

    Very informative!

  • @GarageDynamics

    @GarageDynamics

    Жыл бұрын

    Thank you Austin Bruhn! :)

  • @rckrazy2047
    @rckrazy2047 Жыл бұрын

    HEY! G/D GREAT VID helped me understand my scanner better. On my 2004 s500 Having issues with Door locks, R/Headrest, Trunk not working (open/closing) when pressing key fob or buttons on the dash, new battery in fob. Side mirrors working open/close when locking with fob. Switched out PSE pump replaced fuse under back seat used my BT808 to check PSE functions still not working. I'M thinking PSE pump is working because sideview mirrors open/close with fob. So what am I missing any suggestions. I know I can fix it just need to know where to look. Any help is appreciated thanks in advance.

  • @slimatmim
    @slimatmim2 жыл бұрын

    Nice job on explaining how to use it. I going to use it for the the air ride calibration and for the trans conductor plate I also need it to code out the factory navigation because I installed a aftermarket radio. I was reading the w220 forums you can code it out and adjust the clock from the steering wheel controls but that’s with Star so hopefully I can do it will mp808. Do you know if it will code a key or ignition switch. If you can let know if you can delete the navigation out.

  • @GarageDynamics

    @GarageDynamics

    2 жыл бұрын

    Thank you James Yurko! The MP808 is a great choice for the suspension and transmission. In regards to coding keys, I believe you still have to go through Mercedes even though it has key coding options for the Mercedes. I hope this helps. Cheers!

  • @lynixhosley316
    @lynixhosley3162 жыл бұрын

    Hey GD great vid by the way I just recently replaced my PSE pump I have the same scanner that you have in this video My issue is when I when I try to lock the doors they don't lock or open for that fact The rear head rest do not go down the rear visor doesn't go up or down and the trunk does not open But the 2 side mirrors still open and close when I push the key it sets the alarm Lights Flash ECT... Any idea of what this can be Thanks in advance please keep making these awesome vids

  • @GarageDynamics

    @GarageDynamics

    Жыл бұрын

    Hello Lynix Hosley, Thank you for the kind words. Do you have a strong battery? Is the pump wires and hoses all connected securely? Also, have you reprogrammed the new PSE pump with a scan tool such as Autel MP808 or STAR? If non of these things have helped then I would try asking the people over at www.mbworld.org for some advice. You're welcome! Wish I could have been of more help. I'll definitely keep making videos for you. 😁Cheers!

  • @petrosmpampa.3188
    @petrosmpampa.31884 ай бұрын

    I have a 2017 ms sprinter 2.1 liter w906 will it work ???

  • @iann8642
    @iann86422 жыл бұрын

    For the lumbar settings, neither of my front seats lumbar works. I fixed an air hose that was leaking but all I hear are clicks under each front seat when I try to adjust either lumbar. Yours shows not active so I’m guessing yours are not working either? I have a new pse pump and I’ve swapped out out but no difference then switched it back. I’ve heard these need to be reprogrammed so maybe that’s what I have to do. Any thoughts?

  • @GarageDynamics

    @GarageDynamics

    2 жыл бұрын

    Hello Ian N! I'm not sure what the clicks could be from. It could be that once you program the seats then clicking will go away. I have lumbar support on my car, but I chose to turn it off. That's why it shows "not active". If I set it to "active", then the pump will just run and I want to save the lifespan of the pump. I would try programing the seats through the PSE pump using the Autel MP808. I hope this helps. Cheers!

  • @flobencracaku2212
    @flobencracaku2212 Жыл бұрын

    please help me...I installed a sbc abs pump for mercedes benz w211 and I want to register the new pump..what should I do? coding or programming.. I heard that the vin number must be adjusted with the new pump.. you can do this procedure with autel mp808bt

  • @GarageDynamics

    @GarageDynamics

    Жыл бұрын

    Hello Flobenc Racaku, You will want a scanner that can do both actually. I looked through the autel mp808 and It might be able to do it. I would email autel directly to know exactly which model will be best for your application. I hope this helps. Cheers!

  • @flobencracaku2212

    @flobencracaku2212

    Жыл бұрын

    @@GarageDynamics thanks a lot

  • @GarageDynamics

    @GarageDynamics

    Жыл бұрын

    @@flobencracaku2212 You're welcome! 😊

  • @hunterkemp7664
    @hunterkemp76642 жыл бұрын

    I’m getting trouble code C1517‐032, Stabilizing times when emptying or filling are too large. Rear passenger shock is stuck all the way up. Has been like this for months. Have any idea what would be causing this?

  • @hunterkemp7664

    @hunterkemp7664

    2 жыл бұрын

    2000 s500 with airmatic

  • @GarageDynamics

    @GarageDynamics

    2 жыл бұрын

    Hello Hunter Kemp, It could be that your pump is going out. Have you tried replacing the air strut relay to the Hella relay? It's about $10.00 dollars for the relay and that could fix the issue for a small investment. I hope this helps. Cheers!

  • @hunterkemp7664

    @hunterkemp7664

    2 жыл бұрын

    @@GarageDynamics thanks for the lead. I will try it and post what fixes it

  • @GarageDynamics

    @GarageDynamics

    2 жыл бұрын

    @@hunterkemp7664 Sounds good brother!

  • @czechboy1986
    @czechboy1986 Жыл бұрын

    Hi Whats the different to the mk 808 ?

  • @GarageDynamics

    @GarageDynamics

    Жыл бұрын

    Hello Josef Jelinek, I believe the mk 808 does not do programing. It's pretty much just a basic scan tool. The MP 808 has programing features which is what you want.

  • @vikingrobot4179
    @vikingrobot4179 Жыл бұрын

    Some things Mercedes’ testers won’t clear anyways like a hard fault like a stUCK EGR valve that won’t erase until fixed.

  • @sabahjason1
    @sabahjason12 жыл бұрын

    Do I have to pay for yearly Subscription to use this autel , because I want to buy used one and I was wondering if I have to pay for subscription ?

  • @johnydepp8334

    @johnydepp8334

    Жыл бұрын

    Yes it's almost $400 yearly. For new its free update for 2 years.

  • @Moist_Handshakes
    @Moist_Handshakes2 жыл бұрын

    You want a diagnostic tool that also scans the electronic modules throughout the car.

  • @GarageDynamics

    @GarageDynamics

    2 жыл бұрын

    Hey Maurice! Yes, I agree! I believe this scan tool scans electronic modules.

Келесі