This was very helpful, thanks.

... well done, no fluff - appreciate that.

@pace_of_mind

9 ай бұрын

Thank you!

Thanks for this. It's really helpful. I'm thinking of picking one up, and wondered if you knew how it compared to the UA Volt 4 interface. They are the same price and I do like that the Volt has a MIDI interface. So curious if you are still using the ID14 MkII as well.

@pace_of_mind

5 ай бұрын

Thanks for watching the video! Both of them are in the same price range and have similar specs. Personally, I value ADAT interface over a MIDI interface that you cab buy separately as a $10 usb dongle :-) And yes, I'm still using the ID14 mk2.

@gkillmaster

5 ай бұрын

@@pace_of_mind Thanks so much!! Not on the fence any more. Very best, Greg

@pace_of_mind

5 ай бұрын

​@@gkillmaster thank you Greg!

Good video, to the point. Did you ever tried sending the ID14's 3/4 outs to an external effects processor and the returns from the effects to one of the Behringer's input?

@pace_of_mind

8 ай бұрын

Not exactly 3/4, but yes, it’s possible. What’s your worry? Delay?

@LucasTsolakian

8 ай бұрын

@@pace_of_mind Yes delay, increase latency maybe. I have an ID14 and love it, in fact I have two ID14's: one at home and another at work. I'm about to get the ADA8200 and trying to figure out the possibilities. Thanks for taking the time to answer, appreciated.

@pace_of_mind

8 ай бұрын

@@LucasTsolakian when I was recording my band members, I was sending click via outputs and tracking inputs via adat interface as well as the onboard XLR inputs, can't recall there was an audible delay. Standard interface delay is corrected via DAW settings... ADAT interface is in sync with id14 via clock.

@LucasTsolakian

8 ай бұрын

Awesome, thank you for the info@@pace_of_mind

Side, does this interface really have a low noise floor? Do you ever hear noise when recording with it? Thanks.

@pace_of_mind

9 ай бұрын

It’s pretty much what you have in the specs - very very low. All of my expensive mics have more noise.

Hi! Can you help me with some doubts? I just got this interface set up but the speaker output is very low (have to max it to have decent volume) i conect the 1/2 to my sub and from my sub to the speakers, both have low/hi pass filters. What could be the problem?

@pace_of_mind

Ай бұрын

Hi! Hard to tell what's the issue is, I'm sending 1/2 directly to the speakers and another 1/2 from the output 3 to the sub. Maybe you could try to connect the speakers directly just to test? Another idea, the outputs of the interface are balanced (TRS), depending on your speakers you either need TRS-TRS cable, or TS-TS cable.

Have you tried low impedance headphones with it? My DT 900 Pro X (48 Ohms) sounds terrible with this interface (compared to when directly connected to my MBP headphone jack, which sounds fantastic).

@pace_of_mind

4 ай бұрын

Hi Ramtin! I’ve only tried low quality headphones like Apple Earbuds (40 Ohm I guess) and I didn’t notice much difference so I can’t add much. What I do know is that MBP has a circuit that adopts the RMS voltage depending on the load which might improve the sound.

Hello! Did you tested a SSL interface? Audient has less noise than SSL?

@pace_of_mind

2 ай бұрын

Hi! No, never had one, but most interfaces in this price range have very similar specs. Just choose based on the other features you need (e.g. MIDI vs. ADAT, number of inputs, etc.).

Hello! Can i put two microphones into this interface at the same time? And record when playing an instrument?

@pace_of_mind

2 ай бұрын

Hi! Yes, absolutely!

@cupcakes4100

2 ай бұрын

@@pace_of_mind tyy!

I am getting into voice over soon ..I need to get good interface that I hope last for years .. do you suggest id14 after using it ? Are you satisfied with it's quality? Does it sound professional? I head that there are reliability problems with audient id interfaces after a year or two? And a compatibility problems with windows? So what do you suggest for professional interface until 400$? I really need your advice

@pace_of_mind

7 ай бұрын

Hi Karim! I think id14 or even id4 will be more than enough to record voiceovers, in fact I would suggest investing more money in the microphone and acoustic treatment of your room than in the interface. As far as reliability goes, I've been using the id14 mk1 for a couple of years now and haven't had any problems, so I can definitely recommend it.

Yeah, love mine because of what it offers for such a price, my only issue with it is that it doesnt turn off when I turn my laptop off, I always have to unplug the cable AND EVEN before that, first I have to unplug the headphones so that there's no damage occurance to my beloved HD600s. Then when I want to use it, I connect first the cable to the laptop and then I insert the headphones. Do you also do this or you leave it powered on 24/7?

@pace_of_mind

6 ай бұрын

Hey Robson, thanks for the video! I have my headphones connected to the interface all the time and almost every night I unplug the interface from my laptop to take it with me and watch movies/KZread. Sometimes I leave it plugged in and have never had a problem either way.

@liamquinn

Ай бұрын

Hi Robson, that is an issue with your laptop not turning the usb ports on on power off, any usb audio interface would have this issue. However if it is a windows pc this is usually something you can turn off in your BIOS, depending on your computer so you might be able to change the settings. Mac might have a setting too

Hello my friend . I have been using Focusrite 18i8 2nd sound card for 8 years. Do you think that if I buy the Audient Id14 Mkii sound card, the quality will be better? How about the vocal recording quality? thank you

@pace_of_mind

5 ай бұрын

Hey Hesam, thanks for watching the video! I think 18i8 is holding its own despite it's age. I would not change unless you have other reasons like instability or lack of features.

@wurlitsyzer9810

5 ай бұрын

i suggest the great channel of @JulianKrause for a deep dive into tech specs of all kind of interfaces, also the Audient Id14 mkII .

Hi, I have this same interface but I'm getting zero sound output on my headphones during playback.. what settings get the sounds out? And which is for headphones? 1+2, 3+4 or 5+6? Thanks

@WarrenPostma

9 ай бұрын

You need to set up your headphone mix in the audient mixer software as shown in this and other videos. Did you watch this video?

@pace_of_mind

9 ай бұрын

Just open the System Panel in the ID software. By default headphones is 5+6 and you need to map it to Main Mix.

Hello, have you even recorded electric guitars? I feel that they distort a lot and with low gain... I think the interface may be damaged

@pace_of_mind

13 күн бұрын

@cuchoq, yes, I record electric guitars all the time, no issues. Do you have active pickups? I'm using passives only.

Should I buy ssl 2 or this one for voice over only

@pace_of_mind

3 ай бұрын

Both are great, flip a coin or choose which one you like more ecstatically.

from ssl 2+ vs Id 14 Which one i should buy kindly suggest

@pace_of_mind

Ай бұрын

They are very similar, my preference is id14, but if you like ssl more, go for it.

@R_jazz_official

Ай бұрын

@@pace_of_mind thanks for your guidance. I will go with your choice . finally i oder id 14 .thank you very much ..i am going to subscribe your channel.

@pace_of_mind

Ай бұрын

@@R_jazz_official congratulations with the new interface, feel free to ask questions and thanks for sub!

@R_jazz_official

Ай бұрын

thanks bro

whats the Dac dynamic range

@pace_of_mind

25 күн бұрын

Sorry, I don't know that

Which microphone you suggest for VO UNDER 300$

@pace_of_mind

3 ай бұрын

Do you have your room acoustically treated? If not, get Shure SM7b.

@PODCASTSHALA

3 ай бұрын

@@pace_of_mind how can I send you my rooms pictures so you can help if this is well treated or not

@pace_of_mind

3 ай бұрын

@@PODCASTSHALA it's hard to judge by photos, how much echo/reverb do you have in the room?

@PODCASTSHALA

3 ай бұрын

@@pace_of_mind not much, I have created a small box in which I used many sound absorbing acoustic panels, I have a fan in my room, in night time there is no noise, (only of fans) in day time , my room-it's not acoustically well fully treated(but there is no reverb) , but I've set up some soundproof panels. At night, there's minimal external noise, but during the day, you'll hear dogs barking and children playing occasionally. There's also a fan in the room. I'm considering getting a microphone for voiceovers on my KZread channels and podcasts. In the future, I aim to venture into professional voiceovers. Could you advise whether a dynamic or condenser microphone would be better suited for my setup?

@pace_of_mind

3 ай бұрын

I would suggest to use a dynamic one, either Shure 7b or Rode Broadcaster, both are used in pro-grade productions and broadcasting so should suite your need very well

Am I the only one who thinks that ground loop hum and noise on guitar should be solved for me by the audio interface? I shouldn’t have to run the laptop off its internal battery to prevent hum and noise.

@pace_of_mind

9 ай бұрын

I’m using a macbook and original power supply does not have a ground pin so what can I do in this case? Unfortunately it’s a pretty typical situation for other laptop brands too. I probably should have mentioned this in the video. I'm pretty sure the interface will do great if host device is properly grounded.

unimpressed with the sound of this unit. In general, all USB powered interfaces are blah.

@pace_of_mind

Ай бұрын

Which one would you recommend that is close to the $200 price range?