My first AUDI ever was something that REALLY CALLED attention back in the years...when the first A3 2.0T came out in Brazil, people were CRAZY about that car, as there were no other Audi available. Had a lot of fun, in special after TUNING it. Thanks for the video.

Great vid I purchased a obd a while back cleared some faults and just adjusted a the clutch and torque in your vid also the throttle peddle, as I have a manual s3 the difference is instant keep the vids coming 👍🏻

@wosa9461

3 жыл бұрын

Thanks matey! It’s a great bit of kit isn’t it? I have a few more OBD11 videos coming very soon!

Interesting video Wosa . What a great device well worth the money, 👍👌

@wosa9461

3 жыл бұрын

Thanks Joe! I was pretty impressed with what it can do

Great video man! Very informative. Thank you 🙏🏽

@wosa9461

3 жыл бұрын

Thank you my man!

@ashwinanbu1

3 жыл бұрын

@@wosa9461 sorry a silly question. If we do buy the obd11 pro, would it work on an ios device? In some videos they were talking about getting their android devices to do coding.

@wosa9461

3 жыл бұрын

Yes this was the older OBD11 - the newer one works with IOS for coding now (I’m using an iPhone 11 Pro in this video)

Pretty good video, I bought one eleven pro it was a Helpful video.

Great video as always mate 👍

@wosa9461

3 жыл бұрын

thanks bro! appreciate it! :)

Hi Wosa I’ve managed to enable welcome sound on start up and leaving following your instructions cheers , but there’s no sound of the Audi heartbeat or anything upon start up or leaving is there something I’m not doing Cheers Lee

Hi. Just bought a obd11 pro and have a audi a3 1.5 petrol automatic. Any tips on using obd pro. Any easy steps or quick tips in app?

Hi, A3 owner here, would this clear the pre sense restricted fault? Thinking of buying it just to disable the auto start/stop.....really find it irritating.

Just picked up my 2015 s3 saloon 8V can this device work on that ? Also isit set for life after making these changes or does the device have to be coded all the time ? Any version of obd you recommend now thanks

Nice video so settings I'll defo want to explore in there and didn't know about I went for Carista which allow the same mods. Subscription based but free for the 1st month when buying the dongle which is only £25. Not a great option for long term use (£47/year sub) but good if one just want to setup settings and forget about it.

@wosa9461

3 жыл бұрын

Yeah the Carista probably works out to be a similar cost in all fairness once you’ve opened and unlocked what you want that’s pretty much it until you get a fault to check!

Would you be able to take off the speed limiter ?

can I use it with my phone and also with my ipad if I´d like to have a bigger screen sometimes ?

this helped thanks man!

Great video mate! Greetings from Taiwan!!

@wosa9461

2 жыл бұрын

Thank you! And greetings!

when you return in comfort mode does exhoust flaps still open?

Thanks!!! I have a S3 2017 with virtual cockpit but I cant find the ¨Engine data display¨. Is possible that I can´t do this change?

Hi mate is your S3 Automatic or Manual? I see you have the option for Throttle Response however this is not listed on my 2015 TTS- any idea why?

Hi mate love the video! Is coding the haldex system 60/40 to the rear hurtful to the haldex? I’ve asked on forums. No one seems to have an answer. The person who will be coding my car said it can put pressure on the haldex. Any opinions?

@wosa9461

Жыл бұрын

You’re not putting anymore strain on to the haldex, you’re only shortening the delay it will engage the haldex clutches once the front wheels slip - if anything, bring your service times down to 10k

Great review

@wosa9461

3 жыл бұрын

Thank you Damion!

Hi mat hope u are good. My A3 8v did not come with navigation from factary. Can the obd11 help me

Can you code Traffic Sign Recognition? On Audi S3 2018?

How to encode s3 display on A3 8v 2017. Angine data and g meter works on A3 8V.Tnx

Can the ODB 11 meter work from a iPhone 14? Thanks

Quality video Is it possible to enable the Audi heartbeat sound on my S5 2017 if so how Cheers Lee

@wosa9461

3 жыл бұрын

Yes - control unit 5f “enable welcome” Welcome sound (Jingle) ENG248438-ENG142147-function_configuration_sound-vehicle_readiness_sound,activate And thanks! 😎👍🏻

Great video wosa! Quick question, is the “Video in motion” section on the app used to be able to watch videos on the MMI system or the screen while driving?

@wosa9461

3 жыл бұрын

Thank you! Yes - the in motion allows you to continue watching Videos whilst the car is driving 👌🏻 I’ll be activating this myself I think.. depends on how much of Pepper pig I can withstand 😂

@thecockpitperspective6364

3 жыл бұрын

@@wosa9461 😂 is it bluetooth capable or do you have to have a USB inserted to have the video showing

@wosa9461

3 жыл бұрын

Has to be USB I’m afraid! A little annoying

@Nikosgiannena

3 жыл бұрын

I have it activated In my s3 19

@thecockpitperspective6364

3 жыл бұрын

@@Nikosgiannena how do you like it and what do you use it to watch?

hello i also activated the encoding on audi s3 8v and i have the same problem as you, that is the gmeter is slow while power and torque does not move, how can i solve?

Power/torque gauges will only work on 2019+ S3's

Do you need ODB11 pro for the exhaust valves? Or will the standard version do?

@wosa9461

3 жыл бұрын

OBD does have “apps” which are pre-requisite options, however I’m not sure how reliable they are - the best solution is to long code them out, you would need the pro version for this

Hey, the flaps only open fully in dynamic mode?

Hey mate appreciate the vid, I have made a few changes thanks. I have a question on the brake stabilisation. I get the drop down menu of security codes and selected the one you have selected and it accepts it, but then the drop down menu reappears and wants me to select a code again. It does it with all the codes available to select.

@wosa9461

3 жыл бұрын

Hi matey! Make sure you’re bonnet is open (this will put the car in service mode) If still no joy try 20015 or 40168

Great video

@wosa9461

3 жыл бұрын

Thanks Simmzzi! thanks for the Sub :)

Hi, Thanks for the video! I have just purchased a 2020 S3 and I have the standard obd eleven device (white one) which I have purchased the pro membership for 12 months. Do you know whether I will be able to perform the exhaust valve mod in the app or via the long coding. Neither seem to be working at the minute. Your help would be hugely appreciated, as I am pulling my hair out! Thank you

@wosa9461

2 жыл бұрын

Hi Mark! Would this be an 8Y (new shape) S3? As far as I am aware, this will not work on the newer shapes - make sure the bonnet is up when coding though, this puts the car in service mode

@markstollen4410

2 жыл бұрын

Thanks for the reply. It is the old shape 69 plate S3. I have tried with the bonnet up in dynamic mode and back to neutral. I just get a code 31 on my obd eleven interface. I have managed to make other apps work. I am baffled.

Great video. New to all this stuff. Recently purchased 2019 A7 50 TDi Black Ed Quattro. Is this a device only for RS/S models? If not where can device be purchased. Thanks. Love the videos.

@wosa9461

3 жыл бұрын

Thanks David! And thanks for the sub 😎👍🏻 This device works on all Audi and Voltswagen vehicles from 2010 onwards You can purchase it here; OBDeleven Pro Edition Next Generation Professional OBD2 Bluetooth Diagnostic Coding Scan Tool For Android and IOS www.amazon.co.uk/dp/B00OTG9KGG/ref=cm_sw_r_cp_api_fabc_2QFNEH1SG5P4XTQ3V82E

@BrownieBuoy

3 жыл бұрын

@@wosa9461 Hey..that’s great. Thanks for the reply. Interesting...will defo be investing. Nothing to technical...just some nice to have mods. Thanks again.

@wosa9461

3 жыл бұрын

@@BrownieBuoy Anytime 😎👍🏻

Nice video! Been thinking about getting this for my s3 for ages, but I have always been cautious about it. Have you had any warning lights come up at all after doing these mods? Also, did you do a backup before you started?

@wosa9461

3 жыл бұрын

Thank you! No, I haven’t had any faults or warnings, There isn’t a backup facility - however the device will reset to factory settings at a push of a button 😎👍🏻

@tomjp2349

3 жыл бұрын

@@wosa9461 oh right, excellent. Well you may’ve just made up my mind then! I think I will order one. Great bit of kit & helpful video 👍🏼

@wosa9461

3 жыл бұрын

Really is a great bit of kit! Let me know if you have any problems or questions when you have one 😎👍🏻

@tomjp2349

3 жыл бұрын

@@wosa9461 Thanks, much appreciated 👍🏼

@tomjp2349

3 жыл бұрын

@@wosa9461 finally got my hands on the device! Okay so far, although a little disappointed as a lot of the stuff says it’s not supported with my car (2019 Audi S3 Sportback). Very frustrated as one of the main things I wanted to change was the start/stop as it drives me mad! ☹️ did you have any problems when doing this?

Will the obd still work when your tuned? I’m not tuned just wondering for future reference

@wosa9461

3 жыл бұрын

Tuning doesn’t effect the operation of this device as it will still speak and code to all modules - My S3 in this video is stage 3 tuned 530bhp, that’s why my redline is a lot higher than stock

i HAVE an s5 b9 sir, would g meter and power gauges work ?

@wosa9461

3 жыл бұрын

Hello! I believe the S5 doesn’t have the G sensor installed on the car to have the G meter work, you can code in the G meter but it will not do anything, this only came on the RS5 models I’m afraid!

Is it possible to code the rev shift indicator like on an rs3?

@wosa9461

3 жыл бұрын

It isn’t unfortunately - this requires some hardware the S3 doesn’t have

Hi Wosa Got the welcome sound now but not the heartbeat sound is this definitely available on a 2017 S5 . If so any ideas Cheers Lee

@wosa9461

3 жыл бұрын

Hi matey - hmm.. some variants had it, perhaps it’s not available on your model? Not entirely clued up on the modern S5 range. I’ll have a look in to it for you though 😎👍🏻

@shadesdecorators3497

3 жыл бұрын

@@wosa9461 please do that would be great cheers Lee

Where do I buy the OBD 11 from for Audi S3

How to get ‘Exhaust Flap Deactivation’ on my S3? It says check ignition and try again but nothing is changing. Any help is much appreciated

@wosa9461

3 жыл бұрын

Make sure the bonnet is open - this puts the car in maintenance mode

How do you get those maps ?

Great video. Starting vibration reduction, what module is it?

@wosa9461

3 жыл бұрын

Thank you! That will be module 3 (Brakes) the system runs in tandem with the ABS module & ESP

@HaRdStAyLeRz

3 жыл бұрын

@@wosa9461 Thanks. Couldn't find it. After some research conclusion is that somewhere in 2018 they changed the ABS module and this option is gone...

@wosa9461

3 жыл бұрын

@@HaRdStAyLeRz That is interesting!! I wonder when and what prompted them to do this? Mine is Early 2018.. wonder what changed?

@HaRdStAyLeRz

3 жыл бұрын

@@wosa9461 From what I could gather the module itself was changed.

@wosa9461

3 жыл бұрын

Would be interesting to find out the reason for this - thanks though!

will the exhaust valves stay open even if you go back to efficiency?

@wosa9461

2 жыл бұрын

Yes they will stay open if coded as open

Can you get live data for the transmission temperature? I want to do a spill and fill but need to know the transmission temp for proper fill level.

@wosa9461

3 жыл бұрын

Yes - you can get the live data for Gearbox temp and a whole other host of things IOS device will just give you figures whereas an android device will let you have a chart/graph for data logging

@fixitup232

3 жыл бұрын

Awesome, thanks for the quick reply. This device is worth it just to not have to pay a mechanic to do the transmission fluid change!

@wosa9461

3 жыл бұрын

@@fixitup232 yup for sure! I have all the software and equipment such as VCDS, INPA & NCS Expert etc - still always use this device first just for the simplicity and quickness of it 😎👍🏻

Has anyone figured out how to retract the screen while driving in 2018+ cars? I have a US Spec RS3. When I press the button to turn the MMI screen off, it will lower into the dash if in park, but not while driving. Any help is appreciated.

Does anyone know if those presets cause TD1 flagging by Audi?

My car still has Audi Warranty on it. Does OBD11 effect that warranty?

@wosa9461

3 жыл бұрын

Hello! Hmm.. good question, I would imagine if you changed a particular setting on a module and this module or part related to the module failed and was put forward for a warranty claim, then the warranty claim may/would be denied

any link as to where you got it from please?

@wosa9461

3 жыл бұрын

I got mine from Amazon - www.amazon.co.uk/OBDeleven-Generation-Professional-Bluetooth-Diagnostic/dp/B00OTG9KGG/ref=sr_1_3?dchild=1&keywords=obd11+pro&qid=1605389378&sr=8-3

Great video Wosa, I got the odb11 pro after watching your video, quick question do you know why I can’t get the needle sweep??

@wosa9461

3 жыл бұрын

Thanks Wayne! Not sure - what model car do you have? Year etc

@margaretgledhill9356

3 жыл бұрын

Audi S3. On a 17 plate

@wosa9461

3 жыл бұрын

That’s strange - I though they did this standard? It’s one of the changes I haven’t looked at to be honest, there’s a helpful forum on the OBD11 website that might be able to help - I’ll have a look for a Solution/answer though

@audis3414

3 жыл бұрын

My audi s3 saloon 2017 does the needle sweet, standard I think.

Does the OBD device has to be plugged always for the modifications to work? or you can modify and remove the OBD plug. Thanks!

@wosa9461

3 жыл бұрын

You are changing settings on particular modules on the car which stores the settings - so you can take the OBD11 off and your modifications will be stored/changed, no need to keep the device plugged in 😎👍🏻

For Rs3 8V 2018, with OBD11 Pro, then delete the catalyst sensor Check Engine (new CTS downpipe) ?

@wosa9461

10 ай бұрын

No buddy, this requires removal of the cat efficiency DTC from the ECU - only by reading and altering and re-flashing

@wosa Why does red line in revs start at 7.300? Have you changed anything?

@wosa9461

3 жыл бұрын

Yes matey! The car is stage 3 now so the turbo powers through to high in the rpm - Rev limit is now hitting 7400rpm from the stock limit of 6800rpm

@Nikosgiannena

3 жыл бұрын

@@wosa9461 wow very nice!! Have you measured it with draggy ?

@wosa9461

3 жыл бұрын

Had some fueling issues since being mapped, however I found the problem (just editing a new video now) all fixed! And the best time I’ve had is 0-60 3.02! 👀

@Nikosgiannena

3 жыл бұрын

@@wosa9461 amazing time ! wheels specs? my s3 19' downpipe scorpion decat - racing line intake - delete mufler + turbo mufler.stage 2 ecu & dsg 1570kg 19 bbs 235-35-19 my best time is 0-60 4! :p

@wosa9461

3 жыл бұрын

I’ve the standard 18inch Alloys, specs are; Technics V4 Turbo Forge full wet carbon cotton filter intake Forge turbo muffler delete Scorpion decat Downpipe Forge silicon boost pipes - inlet - intercooler - turbo Forge turbo blanket Forge front mount intercooler RS3 Coil packs NGK 9’s race plugs Stage 3 ECU& TCU Remap. 20mm ST suspension none progressive springs

Do u have 2 pay a subscription ription fee every year and do it charge u credits THANKS

Can you 'code' a new battery with it?

@wosa9461

3 жыл бұрын

You certainly can! A little tricky to do though

What's the benefit of having the exhaust valves open?

@wosa9461

2 жыл бұрын

Just increased sound at RPM’s lower than 3,000

I have Audi rs3 2018, can i code front lights ( matrix ) normal to dinamic blinkers? Thank you.

@wosa9461

3 жыл бұрын

Hmmm matrix front lights should already be dynamic, how many lenses do you see inside the headlight?

@matijaburic2455

3 жыл бұрын

@@wosa9461 can you give me email or contact to send photo?

@wosa9461

3 жыл бұрын

Sure, can contact me via Instagram @Woza_S3 😎👍🏻

@matijaburic2455

3 жыл бұрын

I send😁👍

volevo sapere se ha risolto il cockpit i valore Engine e Torque ? anche a me non funzionano

can I do this to my leased car?

@wosa9461

2 жыл бұрын

You can indeed

Does this void warranty or I can revert it with no trace ? When I take it in?

@wosa9461

Жыл бұрын

You can revert back no issue - I would imagine your dealer would use any excuse to void warranty so best reverting prior to a warranty claim, the device stored history of changes and will tell you what has been changed from what setting to the current setting

Anyone else notice the G-meter looks the same as the heater vent?

How did you find the starting vibration reduction? and torque limitation deactivated? Worth it?

@wosa9461

Жыл бұрын

Depends what stage your car is at - for 1&2 vibration reduction and torque limitation off works well, not so good for stage 3 though

@danyal_k_3437

Жыл бұрын

@@wosa9461 it’s currently stock!

@danyal_k_3437

Жыл бұрын

@@wosa9461 would it be great for stock?

@wosa9461

Жыл бұрын

Yes - a little more wheel slip on launch will give you a faster time

Would really love to know how to get the power and torque gauges to work

@wosa9461

3 жыл бұрын

It’s some extra coding I’m trying to get my hands on, I know of a few guys who can do it - but they’re reluctant to give the info over as they own VCDS adjustment businesses 😩

@tomforde6558

3 жыл бұрын

@@wosa9461 no information on any of the multiple Audi forums?

@wosa9461

3 жыл бұрын

@@tomforde6558 North East VAG adaptions the guy flys under here's a link; facebook.com/watch/?v=206114867093799

@tomforde6558

3 жыл бұрын

@@wosa9461 I don’t think the coding is different for US/UK, I followed your instructions and got the working G meter but only 0/100 power and torque which is just on/off in reality

@wosa9461

3 жыл бұрын

@@tomforde6558 As soon as I find out the extra coding to active the power and torque dials properly I will do a video - I am on a mission to find out what needs to be done!

hello ...do you have any long coding for line assist camera ? ...

@wosa9461

3 жыл бұрын

You would need the steering module for this to work - unless you have self parking etc it will not work

@MaxStudioCG2023

3 жыл бұрын

@@wosa9461 all the modules are instaled ....was working before ...it just stopped working ....now when i press the button it seems like is active but dont do nothing when driving ...is just show the grey lines and do nothing .... i play around with obdeleven and seems all working fine, calibration of camera is ok but something missing mabe some fresh coding will help ...

@wosa9461

3 жыл бұрын

Sounds like you have an issue with your front camera - had you changed anything via coding prior to this happening?

@MaxStudioCG2023

3 жыл бұрын

@@wosa9461 was working fine alot time then car in the garagr ,then i changed the windshield (but for free with assurance company) and the calibrate and test and they say all ok ...saying is weird all test ok but in the drivind dont work .... also the ACC jam assist stoped working also (when i press to activate message pop and say :unavaible check owner manual ...is like i dont have the radars anymore ....but i have prestige packk all sistems where working fine .... (mabe some full coding will help ...the thing is if i go to a dealer will pop me with some 1000 euro or more (so i have to tool to code but i dont know the steps ....that why i search a full coding tutorial ...mabe will help ...

if you get how to do the power gauge properly plz post a video.

@wosa9461

3 жыл бұрын

I will do! 😎👍🏻

Will this void warranty?

@wosa9461

3 жыл бұрын

Hey Felix! I would imagine if a component fails that you have coded differently, then Audi would refute the claim - but as a whole, this wouldn’t affect your warranty

Why am I struggling to the put it in the odb port? I have the same car but it doesn’t seem to go in

@wosa9461

3 жыл бұрын

Strange matey! They should just fit in snug - count how many pins both the port and device has see if somethings a miss

@louisparker7580

3 жыл бұрын

@@wosa9461 yep the pins were a bit wonky and I had to straighten them so they fit into the slot!

@wosa9461

3 жыл бұрын

That’s not great! Glad you sorted it though matey!

Does this work on my 2019 a5 ????

@wosa9461

3 жыл бұрын

Yes it does - although some features may be different

@charliemac382

3 жыл бұрын

I just want the tilt mirror feature and the window feature. But I don’t know if will work because I have the basic model

Is it not possible to let the power and torque meters work? Maybe with some adjustment in the ECU?

@wosa9461

3 жыл бұрын

It’s something to do with the actual dash module itself - the 2019 models onwards have this ability, the pre 2019 only have the ability to show the gauges but not actually work

@mrnobody7327

3 жыл бұрын

@@wosa9461 so you are saying that if i would change the dash module with a 2019 model the gauges will work?

00:45 OBD Haha not ODB! Nice video though!!

Would it work on my 2.0 tdi diesel?🤞

@wosa9461

Жыл бұрын

Yes - you can do lots of changes on the TDI too

@muhammedb5357

Жыл бұрын

@@wosa9461 interesting. So how much you pay for app and all that? Thanks

Where did you buy OBDeleven pro from

@wosa9461

3 жыл бұрын

Hi Matey! Bought mine from Amazon; OBDeleven Pro Edition Next Generation Professional OBD2 Bluetooth Diagnostic Coding Scan Tool For Android and IOS www.amazon.co.uk/dp/B00OTG9KGG/ref=cm_sw_r_cp_api_fabt1_S9qTFb2T4SS0G

@jameskinsella2110

3 жыл бұрын

@@wosa9461 thanks mate need to get it to do some coding on my s3

@wosa9461

3 жыл бұрын

@@jameskinsella2110 No problems - give me a shout if you have any questions or problems :)

@jameskinsella2110

3 жыл бұрын

@@wosa9461 I will do thanks mate

@jameskinsella2110

3 жыл бұрын

@@wosa9461 when you bought it off Amazon how did you get the 200 points

Love how he said OBD the first time and every time thereafter he kept saying ODB 😂

lockdown monday?! i cant believe that is almost 4 years ago... jet lagg hahaha we've all been fooled.

I wouldn’t want to see all the faults on my car 🤣 - great bit of kit though.

@wosa9461

3 жыл бұрын

😂😂😂 ignorance is bliss as they say

Crazy how g meter works in s3, but not the S4

@wosa9461

3 жыл бұрын

It’s annoying it’s like this across the range - Torque and Power work on 2019 S3’s onwards, but not the previous models. No idea why G Meter can’t be loaded correctly on the S4 🤷🏻‍♂️

@thomascooke337

3 жыл бұрын

@@wosa9461 I have a 2020 Audi s3 8v, will the torque and power meters work properly like in an rs3? Thanks

@wosa9461

3 жыл бұрын

Hi Thomas - yes, from 2019 onwards they came with the necessary module to do this, only the gauges appear on pre 2019 but 2019 after the gauges will work 😎👍🏻

Error exhaust valve alway open is not working. In your video

Wait how do you have google maps like that

@wosa9461

2 жыл бұрын

Audi was partnered with Google maps until 2020 when they didn’t re-new their licence, so prior to 2020 the navigation was Google maps

@userunfound4320

2 жыл бұрын

Oh I have a 2018 8vs3 and it doesn’t have it I guess that’s why

Audi dealer in Australia said this would entirely void my warranty if i did this.. feels bad

do you have to pay a subscription to this device?

@wosa9461

3 жыл бұрын

No subscription fee - the “Pro” device comes with 200 credits (each app price is 10 credits aside from “video in motion” which is 100 credits) You earn credits each time you open the app (2-3 credits) however should you require more credits you can buy 200 for £37.99 or there are other small/larger options) Honestly 200 credits is enough for the changes most would want

@peterhutton36

3 жыл бұрын

@@wosa9461 i just would like somthing like this to view and clear fault codes really, not to make any changes. Which OBD11 device is best for that?

@wosa9461

3 жыл бұрын

@@peterhutton36 just the standard “none pro” version which costs around £60 would be all you need

@peterhutton36

3 жыл бұрын

@@wosa9461 very helpful thanks. What if i wanted the obd11 to do a DSG reset/adaption, would i need to purchase a differnt OBD11?

@wosa9461

3 жыл бұрын

No - the DSG would just require going in to the coding section of the OBD reader, most of the things the “apps” do that cost credits can be done via the coding options, the apps just serve as a quick loading of settings without delving in to the coding. The long coding part of the OBD are clearly displayed for what the settings/coding does - so in that sense, there is really no need to use the apps for most changes, it’s just a dummy proof way of changing settings

Do you realize that you are cycling between saying ODB and OBD ?

ur long coding of the exhaust valves failed ... 16:14

@wosa9461

2 жыл бұрын

This particular time yes, if you are changing many things during the same login you will experience some options to not work It works best when you log in to a particular module and code one item and then back out

@4w0ken

2 жыл бұрын

@@wosa9461 So it worked for u? Im just asking because im particulary interested in this feature and wanted to know before buy

@wosa9461

2 жыл бұрын

Yes it works matey

Tuned s3? Your red line is later..

@wosa9461

3 жыл бұрын

Yes! Stage 3 running 530bhp

@XxJacky4everxX

3 жыл бұрын

@@wosa9461 really nice! Do you know how to code the shifting lights in the VC from the RS3 when you’re in manual? Or the higher red line when the Engine is cold?

@wosa9461

3 жыл бұрын

Unfortunately S3’s pre 2019 never came with the required module to do this 😩