Hi mate, Thanks for taking the time to post this. It is very helpful. Thank you my friend, Cheers, Nigel

Thanx for posting the video on Audi injectors removal.

@crank3646

6 жыл бұрын

You are welcome :)

Great video, Thanks from Texas for your help, have a 2012 Touareg TDI.

Great video very useful? Have you done one on testing the injectors?

Thank you from Germany

@euunitedwestand1471

5 жыл бұрын

ROCKWITHTHEGLOCK long Live Union Europe SIR !

Great informative video if only I'd found it earlier, changed a faulty injector on my Q7 with the p0204 code using the same old stretch bolt and no cleaning 🙈, tbh it lasted 10 miles before throwing up the p2146 code and I'm guessing this is due to my rushed dodgy mechanical skills 🤦‍♂️

Were you able to start the engine immediately, without a airlock issue?

Thank you :)

What is the torque for the nuts and do you need to change them for new one thank you

my friend thanks for the great video... my question is to put a new injector do you and can you use the ross tech cable to adopt the new injector?

@crank3646

6 жыл бұрын

Never done it with Ross Tech . But i believe its possible , just search in google , Ross Tech injector coding . I use Launch X431 for this procedure .

@roozbonGT2RS

6 жыл бұрын

thanks!!!

@Misikee0816

6 жыл бұрын

Rooz Bon yes,You can adopt with VCDS ,engine/long coding

What's the nm on the 2 nuts that hold the under bracket with the two holes in it ?

So there is no stretch bolts for these injectors,just 2 nuts?

Здрасти ,чудесно видео,много ми харесва обратноя чук,с какъв диаметър и резба е втулката от към дюзата. Мерси

@crank3646

4 жыл бұрын

Мерси ! Имаме доста втулки за различни видове дюзи и всички са смесени на едно място . За да ти помогна трябва да имам разглобена такава кола при мен , а в момента нямам

Hi. I've dropped the last nut into the valve cover. Any idea of how to retrieve it? It was the very last nut that holds the injector in place..

@crank3646

4 жыл бұрын

Only the magician of magnets can help you now :D

Good video. Does the copper washer just sit inside the recessed hole the injector slides into.. Is it easily removed?

@crank3646

5 жыл бұрын

Thanks Gareth ! Most of the time , the copper washer comes out with the injector itself , but if it remain in the hole you going to need something to get it out from there . Its important to change the washers , everytime you remove and reinstall the injectors .

@critical_mass8279

5 жыл бұрын

Crank thanks for the reply. Yes, I have a ticking noise which sounds like it's coming from one of the drivers side injectors. (possibly centre one). I'm told it could well be the washers that need changing.

@crank3646

5 жыл бұрын

It is possible , but most of the time is the injector itself . Did you check the correction factors in VAG COM ?

@critical_mass8279

5 жыл бұрын

Crank no, not yet. But I will.

@critical_mass8279

5 жыл бұрын

Crank took readings today 0.99, - 0.33, -0.38 -0.24, -0.42, 0.38

My friend where can I get that adapter for the slide hammer to injector

@crank3646

4 жыл бұрын

It is selfmade

@macauleyh5

4 жыл бұрын

@@crank3646 what size thread is on the injectors? Looking at making myself one, getting mixed sizes ranging from M8 to M14 (mines a 2008 Audi A5 3.0 tdi)

Which are the numbers for screw on injektor? M14x1,5?

@mateuszkosek529

3 жыл бұрын

The same question :)

@anttisalonen7910

Ай бұрын

Yes, M14x1.5

Заради този клип се записвам за канала, понеже от няколко дена имам Audi и... да :D

по русскому хорошо говоришь Брат. 👍

Why do Audi make DIY so difficult

@DutchDukeMan

2 жыл бұрын

$$$$

@hobo1704

Жыл бұрын

So you have to spend $$$$$

@arfanzaman6817

Жыл бұрын

Does it matter if you turn upside-down this injector plate when installing injector

Hello Sir. I have Audi Q7 2008, I've changed injectors Still my problem doesn't solved it needs a spray into air system to start the engine without spray it doesn't start Could you help me pleases to solve that problem I'd be very grateful..

@crank3646

7 жыл бұрын

Hello! You have some air in the fuel , probably some little crack in the fuel lines .

фарсунки как на Renault. очень Похоже.

bratle obqsni go na bg ko sa muchish na eng :D

@crank3646

7 жыл бұрын

Хаха , някой ден като го науча , гледай само колко подробен ще стана :)

@justjpplayvj4340

7 жыл бұрын

Crank Ще го научиш izi ;)