Asus B760-I / B660-I with smaller VRM Heatsink for Noctua NH-L12 Ghost S1 Edition
Ғылым және технология
You can buy the Heatsink on ebay EU for 29,75 Euro
www.ebay.de/itm/385881386354
Contact: info@rhino-tec.de
Partnumer: 14655
Description: VRM Heatsink for Asus B760-I and B660-I Mainboard with Thermalpad 3.0 W/mk
Dimension: 73x17mm hight 25mm
Temp comparing: 3 to 4°C warmer than the original Asus VRM
compatible with these Asus motherboards:
90MB19C0-M0EAY0
90MB19C0-M1EAY0
90MB1D90-M0EAY0
Please read:
faqs.noctua.at/support/soluti...
People who are looking for a CPU Fan Cooler for ITX system that really uses up all the space don't have a lot of choices.
Many then end up with a 92mm low-profile cooler such as the Noctua NH-L9.
You really get the impression that the mainboard manufacturers are doing everything they can to make life as difficult as possible for the people in the SFF / ITX community.
There are mainboards with a lot of unnecessary structures on the I/O panel shroud and on the VRM heatsink.
With our product we can at least help you to lower the height of the VRM heatsink (25mm) a bit without having to accept the great loss of cooling performance.
Here are the parts and tools that were used here:
Noctua NH-L12S (Fan Top Mount)
Noctua NH-L12 Ghost S1 Edition
Intel Core i5-13500 Processor
ASUS ROG STRIX B760-I GAMING WIFI
ASUS ROG STRIX B660-I GAMING WIFI
Wera 05118135001 2069 Elektroniker-Steckschlüssel, 3/16" x 60 mm
Wera 05134000001 Kraftform Micro Big Pack 1 Schraubendrehersatz, 25-teilig
TK4900 Tool: www.ibstool.com/shop/
Пікірлер: 20
Works fine with ghost L12S. Keep up the good work.
Would you be able to just cut the original one shorter?
I need help with z690-i some people said I can install d15 if I removed top m.2 heatsink any suggestions for air coolers or AIO? considering I have 13600kf
Is it impossible to fit the NH-L12S with the fan underneath? Or do you have any mods that would allow such a mount?
@RhinoTec
10 ай бұрын
1. no is not possible. 2. no i am sorry.
hi do you know if this also work with CPU cooler Alpenföhn Black Ridge? thank you in case of any help
@RhinoTec
11 ай бұрын
Hi, i have not test it with the Black Ridge
Will this smaller vrm Heatsink also work for an Asus Z690-i ?
@RhinoTec
5 ай бұрын
No i am sorry
just ordered, but does it come with thermal pads?
@RhinoTec
4 ай бұрын
yes
why you cant turn the heatsinks to the side where the nvme stand?
@RhinoTec
3 ай бұрын
Noctua: When using top-flow coolers in a tower-style case, we strongly recommend installing the cooler with the heatpipes in horizontal position or with the bends of the heatpipes pointing downwards. Please avoid installing the cooler with the bends pointing upwards, as this may result in reduced cooling performance. In desktop cases, the cooler can be used in any orientation. faqs.noctua.at/support/solutions/articles/101000352747-in-which-orientation-should-top-flow-coolers-nh-c-series-nh-l12-nh-l12s-be-installed- It also depends on the housing you want to use
Why don’t you turn the heat pipe downward?
@RhinoTec
Жыл бұрын
Noctua: When using top-flow coolers in a tower-style case, we strongly recommend installing the cooler with the heatpipes in horizontal position or with the bends of the heatpipes pointing downwards. Please avoid installing the cooler with the bends pointing upwards, as this may result in reduced cooling performance. In desktop cases, the cooler can be used in any orientation. faqs.noctua.at/support/solutions/articles/101000352747-in-which-orientation-should-top-flow-coolers-nh-c-series-nh-l12-nh-l12s-be-installed-
@axel-11
Жыл бұрын
@@RhinoTec Yes yes, dear sir, but are you saying that you have a case that flips motherboard upside down? Even without reading, just by comparing image with red cross (which means "wrong") at provided link and this moment 5:09 - it's obviously wrong position (again, unless you have upside-down case). Or am I wrong?
@RhinoTec
Жыл бұрын
@@axel-11 Hi, on Ghost S1 Case is the MB upside down, please look this Video on 1 : 17 kzread.info/dash/bejne/ioV3psWvg8e2hdY.html Our VRM Heatsink is Special for Ghost S1 users how want mount Noctua NH-L12 Air-Cooler Also "upside down" Motherboard: Fractal Terra, Formd T1, IQUNIX ZX-1 or Phanteks Shift XT But you are right on other ITX Cases is the MB with Standard Orientation. DA2 V2 or Dan Case H20 A4
@axel-11
Жыл бұрын
@@RhinoTec Oh thank you so much! That's a very important clarification, now I understand. Have a good one
@axel-11
Жыл бұрын
@@RhinoTec May I ask you, do you think, if you had to install another cooler - DeepCool AN600 - on the same motherboard, would you still need to replace the VRM heatsink?