It would be nice to specify the screw size and which direction the outside bars are to be assembled in.

which height should i set the LU2-2 module to?, i want to cut a 2mm thick plywood

1:09 I finished assembling mine, when I turned on the power the laser stays on

what should be the height of the laser ? how many centimeters

Hi, I need some help, i have just purchased laser master 2s2, and set it up, the only trouble is the X-axis is not moving, I have checked the cables and when i home the y-axis moves but the x-axis does not, plus the laser GRBL shows an icon that says 'Alarm' can you help?

:49 my bar will not fit in the railings like yours in this video. This company gave me no help like a manual to walk me through how to put it together or how to work it if I got it put together

Mine did not come with the rubber track. This is bs

Video made everything super easy. However; have stripped the grounding screw on the laser can I ground to another screw on the laser?????!

@ORTUROFFICIAL

Жыл бұрын

Hi Roz, yes, you can.

Hello , thanks for the video , !!!I have a question for you. I bought a laser machine .. Artur Laser Master 2 PRO S2 .. I connected everything as in the instructions, downloaded the driver program.. But when you turn on the machine, the light bulbs start blinking periodically ( red blue) the head does not walk.. What could it be???

@ORTUROFFICIAL

Жыл бұрын

Hi Samvel, please check if the emergency stop button is pressed, please screw it to pop up.

@Sam1970Sam

Жыл бұрын

@@ORTUROFFICIAL Thanks everything worked fine

No timing belt in my box 😮

Followed instructions after hitting power the laser comes to front left corner but hit the front bracket making a noise?

@chrisgaither7680

Жыл бұрын

I am currently having the exact same problem

@RichardHess-yz9ff

Жыл бұрын

@@chrisgaither7680 It's the laser safety shield hitting the rail before it can trip the limit switch. If you remove the shield it should work. waiting to hear back from tech support. My guess is to move the limit switch back a bit. Did you resolve the issue?

@chrisgaither7680

Жыл бұрын

@Richard Hess I have not yet but I will try what you said. It would be easier if there were actual instructions on how it's all put together. Thank you for the help

I connected the device to the computer, but the computer does not see it, what should I do?

@ORTUROFFICIAL

2 жыл бұрын

did you install driver?

@jabbarhajiyev3052

2 жыл бұрын

@@ORTUROFFICIAL I downloaded the driver to my computer, it still doesn't open

@mrt6031

Жыл бұрын

@@ORTUROFFICIAL you guys suck! No help what so ever. Figured it out and it’s different from this video. Y’all suck as a business and show be sued for selling a product we have to put together with different pieces in every tutorial of the s2

Good video! For anyone putting this together, use the instructions on their website and this video as a supplement. Go back and forth between and it’s super easy.

Poor video! You skipped many steps! Why did you not produce a detailed video showing each step? Also, thanks for not including the english instructions, poor as they are, in the box. I had to go to tech support to get someone to send them to me which turned out to be a waste of time since they are not detailed enough to be of any help.

@ORTUROFFICIAL

2 жыл бұрын

sorry, may i know more which step is not clear? we will revise. And please download instruction, manual, and software through the code in box, thanks

Slow it down for the love of god

This video does not do a good job of showing how the edge pieces are supposed to go on I've had to un do it multiple times now...