Assembling 8500rpm "Big Port" Head with SuperTech Valvetrain Components
Автокөліктер мен көлік құралдары
I'm building a set of 2.8 ATQ cylinder heads with big intake ports to use on my XSPower K04 Stage 3 2.7T motor. In this episode I lap the valves, then assemble the bare 2.8 heads with ATQ cams, APB valves and lifters, and SuperTech valve springs and titanium retainers. Then I install the heads on the motor and torque the head bolts.
2.7T Build Off Challenge Playlist: • Audi 2.7T Build-Off Se...
Instagram: @pbgaragelive
Facebook: / pbgaragelive
0:00 Intro
0:50 Exhaust Valve Differences
3:45 Lapping Valves
8:40 Installing SuperTech kit and valves
13:00 Installing Valve Stem Seals
14:20 Installing Retainers and Keepers
18:00 Lifter Install
19:15 Installing Cams
23:25 Cam Timing Solenoid
24:50 Cam Caps
29:00 Cam Seals and Plug
31:00 Cam Position Sensor Trigger Wheel
32:00 Head Gasket
33:21 Head Bolt Install
34:00 Head Bolt Torque
36:36 Blake's T Type
Пікірлер: 27
Great walkthrough and detail! The only thing that may be good for first time builders to know is to make sure the cam caps go on properly so that the oil journals line up with the feed. Can’t wait to see what’s next.
@PBGarage
3 жыл бұрын
Good call on the caps!
I understood less than 1/3 of this but still find it interesting that individuals know how to do this kind of stuff.
@PBGarage
3 жыл бұрын
If you get into rebuilding a head yourself a lot of it will make much more sense!
The cam cap doesn't sit flush, yours is installed correctly 👍🏻 As for the two types of cam seals (teflon and rubber), shame on you and I don't know how you'll sleep at night but hey it's your car. 👎🏻 Good thorough video though! Can't wait to hear this engine run.
@PBGarage
3 жыл бұрын
Since I have to take the front cam cap off to spin the cam on the chain, that seal will come out easily, I'm thinking I might throw the Elring one in when I reassemble. That way YOU can sleep at night. Hahaha
I’m running a GT358R with tial exhaust housing. Pulls pretty damn hard at 22psi 😂
@PBGarage
Жыл бұрын
Can't wait to see what this set up does!
Any reason to not put the new cam seals on the cams before you torque down the cam caps? That's what I'm planning to do.
@PBGarage
3 жыл бұрын
I couldn’t find any reference in the FSM to doing it that way, only doing it with the caps already installed. I wonder if have the seal in place before torquing down the caps might keep them from seating square on the head.
Great video! Very informative. I have been having trouble finding the socket to use on my bolts. Did you use the 9mm or 10mm Ribe?
@PBGarage
Жыл бұрын
If you mean the nuts on the cam caps and valve cover they should all be 10mm socket
@ThorinJames
Жыл бұрын
Actually referring to the head bolts but I got the info I needed. And a few extra tools. Thanks again!
@PBGarage
Жыл бұрын
@@ThorinJames ah yes sorry! polydrive!
So you use the 2.8 intake valves, 2.7 exhaust valves, and a 2.8 exhaust camshaft?
@PBGarage
Жыл бұрын
I’m running 2.7 intake and exhaust valves, and both cams are 2.8 as well as the head itself. You could run the 2.8 intake valves but the ones I took out of the 2.7 seem identical and were in much better shape.
Hey, thank you for the video! Can you give me a number of the supertec-set, please? Thanks a lot!
@PBGarage
2 жыл бұрын
ST-SPRK-AUDI27T But depending where you’re getting your parts just google super tech 2.7t and it should come up
Where can you buy the valve train i cant seem to find it anywhere!
@PBGarage
Жыл бұрын
ECS Tuning has them, and Integrated Engineering. Or just search SPRK-AUD27T
Did you show modifying the intake manifold in another video or did you use a different intake manifold?
@PBGarage
2 жыл бұрын
I’m working with a local machinist to enlarge the intake manifold. I’m hoping to come up with a CNC program so it’s reproducible for others.
@kylesienknecht7137
Жыл бұрын
@@PBGarage any luck on this?
Is there a reason you didn't block the sai ports? On the forum everyone syas to
@PBGarage
2 жыл бұрын
Yes I will have to , just don’t have the block off plates yet.
Can we put the 2.7 cams on the 2.8 head ?
@PBGarage
Жыл бұрын
You definitely can but they’re less aggressive, so it might defeat the purpose of the 2.8 heads. A lot of people run the 2.8 cams in the 2.7 heads for some gains.