Warning: swinging any revolver cylinder closed will wear down the insides and after a while it won’t reliably rotate and you may have accidents where the cylinder isn’t aligned properly.

@natelaurendeau7500

3 жыл бұрын

#LIFESAVER

@flatfish77

2 жыл бұрын

Thank you General.

@marvinelliott-cz3kq

Жыл бұрын

I did and my gun broke

@homeguard8481

Жыл бұрын

So uncivilised, I like it.

Don't worry about not being able to swing the cylinder shut by flipping the gun. You don't actually do that with real revolvers as it will damage the gun. In the movies they do that, but not in real life.

🔥🔥🔥🔥🔥🔥🔥keep up with the great content

Best review video ever!

@MaxCherepenin

4 жыл бұрын

Glad you liked it!

@bigrig9231

Жыл бұрын

Very thorough

Great Review

The top hole infront of the cylinder is for hopup adjustment

My dream Magnum airsoft gun

Really wish they did the green gas version of this. It would be so much more practical for me. Sometimes you just want to pop off a few shots, not having to use the entire CO2 capsule.

@ilmt

2 жыл бұрын

I have foind on ALiexpress a CO2 capsule shaped gas tank with filling valve at bottom and exit one at the top. It is quite cheap (like $10) and I think it could work in the revolver quite well. I have only tested it in a GBB Mini Uzi replica and the Green Gas doesn't have enough power to reliablty cycle the action (close, but no cigar) - which is not a problem in a revolver. One thing to note - it is necessary to be able to fill the capsule after it was inserted into the gun/magazine otherwise it would have gas for only a couple of shots - that is the problem you can find in the showcases and poor reviews on youtube and on the site - so it might require slight modification of the nut (drill it through) but other than that I think it could work well in the revolver.

@g9sneak7

2 жыл бұрын

Your saying once you fire with co2 u have to use the whole tank in the moment?

@ilmt

2 жыл бұрын

@@g9sneak7 Basically yeah, it is not recommended to leave a capsule in the gun for a long period of time as it stresses it.

@EWAIRCRAFTONTOP

Жыл бұрын

Fun fact: you cant shoot green gas in winter

@lofighost8811

Жыл бұрын

​@@ilmt actually it is advised to keep ur gbb gun/mags gassed up as it help keeps the O-Rings fresh for longer

Any thoughts about wingun revolvers? Are they accurate at good revolvers?

The top hole is the hop up its adjustable

At the 13:40 mark on the video you talked about what single and double action is, you are right as to the description of what’s happening with single and double action BUT you said there’s no difference using the gun or any gun for that matter single or double action. There is a big reason why one is different in its use, with double action you are cocking the hammer and firing the gun therefore it takes far more pull strength on the trigger compared to single where you cock the hammer first anda when taking the shot you are only releasing the hammer, much lighter trigger pull and so your accuracy goes up, there’s a little piece of info.

You saw evike has the EF Glock 18c's? Can't wait to see a rewiew on them. Also whats up with the lack of content? Very supprised you didn't pick up the EF Glock 19x yet

@MaxCherepenin

4 жыл бұрын

Yeah, its been a busy few months and getting all of these guns are quite expensive. I am working on getting things going again though!

12:08 nice

I have this...it’s a fun plinker...I use the powered down shells...

@MaxCherepenin

4 жыл бұрын

Nice, yeah i love the high power shells. The power overall is pretty awesome.

@beison8000

4 жыл бұрын

@@MaxCherepenin Do the high power shells work for the 715 model?

@m6dspartan903

4 жыл бұрын

@@beison8000 yeah

Beautiful guns! I own a steel grey 2.5" and a silver 4". I'm yet to get the 6" to complete the collection!

@Baskin20916

2 жыл бұрын

Wait until you hear about the 8 inch

@hannibalsmithairsoft5923

2 жыл бұрын

How does the grey look in term of being like monotone grey or almost a case hardened effect

@memberberries9782

2 жыл бұрын

@@hannibalsmithairsoft5923 it's quite glossy, it gets a rainbow gun metal effect when it's destroyed in fingerprints, and when it's wiped down it's just very dark and shiny nearly black almost. I do prefer it to the silver one I have

@hannibalsmithairsoft5923

2 жыл бұрын

@@memberberries9782 Awesome, I already have like a race gun gucci glock and wanted too get something super impractical and fun as hell.

i found some power down shells for it that you can get which makes lower FPS

@SC-rk7be

8 ай бұрын

newbie here, why would u want lower its fps? cuz for durability sake?

@throttlegoblinfpv

8 ай бұрын

@@SC-rk7be to be able to play CQB and shoot other people etc, CQB arenas usually have FPS limits

@SC-rk7be

8 ай бұрын

@@throttlegoblinfpv ah. makes sense now. Thank you! Could you maybe help me decide between ASG DAN Wesson original 8" vs this 715 6" version? can't decide!

@throttlegoblinfpv

8 ай бұрын

@@SC-rk7be im sure you like either one, the 8" is of coure more badass looking also i have a 3D printable shell design, which are meant to be cheap and moreless not as worrisome to lose on the field, i also made a speed loader that fits regular speed loader pouches

12:08 haha nice.

Had the original gun a while now. Eventually parts wear to the point that the cylinder catch (being plastic) can no longer perform and hold it in place. Trigger is a bit iffy, a few other issues. That said, I’ve not maintained it at all, it does/did shoot hotter than quoted. You can also modify the power really easily. Overall a great gun and I certainly don’t regret getting it, however would I buy it again? I don’t think so. With all of that in mind, this is likely upgraded now, and I am aware you can buy replacement parts so this was just my ‘two cents’

@scouttrooperhh-1487

3 жыл бұрын

How do you increase the power?

@charlie91757

2 жыл бұрын

Does it still work, I just got one

@ardakaraca129

10 ай бұрын

​@@charlie91757Do you glad to got it sir?

Just got one of these and need advice- When i'm loading the co2 cartridge, its hisses and sprays co2 out over the cartridge. Am i twisting the 'alan-key' too slowly?

@lefishe2485

2 жыл бұрын

Most likely yes, id just screw it down faster and a little more firmly so it has a good chance of sealing.

@thomasmartin5182

2 жыл бұрын

@@lefishe2485 much obliged, good sir. Final question; is it bad to leave a 'not empty yet' cartridge in the gun over time? Will fade over it's own or damage the gun. Thanks again

@Healz0

2 жыл бұрын

@@thomasmartin5182 it’s actually best to leave one with a little gas in rather than none, as the seal can deteriorate over time with no pressure against it

@jaysoncruz1564

2 жыл бұрын

always put silicone oil on cartridge tip before using

The title says airsoft?? Where is the orange tip?? This looks like the bb version?? So wil it shoot steel bbs..

i should've got this one over the ASG Licensed Dan Wesson WG

@nathanielcecil2wz98

Жыл бұрын

This is the asg one

Is it true that it has hop up? On Evike it is listed with an adjustable hop up.

@g00dSp33d75

4 жыл бұрын

The top hole he says is for mounting is for hopup adjustment

@emilh2361

3 жыл бұрын

@Epic People59 your mom bought this

I don't when the revolver gun was released. I just got my

Never slap the cylinder ! Is this Barrel rifle?

Where can I buy this stuff magnum 357 dan wesson? I want to buy...can you help me? Please

What length barrel is this

This only shoots the plastic 6mm bbs? I thought it shoot the small metal bbs

@MaxCherepenin

4 жыл бұрын

There are two versions. This is the 6mm version.

what caliber is the shells

how did you get all of the orange plug out? i remember the orange tip you cut it off but i see it's all gone?

@fattybaddie

3 жыл бұрын

you probably wont wanna do that. just sayin

@storminormtharp5948

3 жыл бұрын

@@fattybaddie why

@storminormtharp5948

3 жыл бұрын

@V no it’s not

@itsvaporx9633

2 жыл бұрын

there is no orange tip on it

@murrkat6148

Жыл бұрын

@@storminormtharp5948 it's what shows its not a real gun. If a cop sees it without the orange tip he might shoot you. Plus it's required in some states.

Does it rust

How many shots you get out of 1 co2?

@Vaydore

2 жыл бұрын

From what I've heard, about 50-60

👍 parabéns

do you know what the revolver is made from? Is it steel or some sort of other alloy like alluminium or zinc.

@MaxCherepenin

3 жыл бұрын

Probably aluminium or yeah maybe zinc too.

@benp4736

3 жыл бұрын

@@MaxCherepenin it feels strong though, right?

@MaxCherepenin

3 жыл бұрын

Oh yes, it feels pretty solid.

@benp4736

3 жыл бұрын

@@MaxCherepenin nice, thanks for replying.

@therabbithat

2 жыл бұрын

@@benp4736 very heavy! The weight of it you'd think it was steel

What is it that shoots out? That's the only thing that confuses me.

@deadlytiger9097

Жыл бұрын

BBS u put them in the shells tip

are the bullet casings brass?

@RCascade1996

2 жыл бұрын

I own this and yes, the casings are brass

I was thinking of this model 6"BB but i noticed the 4" shoots pellets, I like the chrome. What do you think about the difference between BBs and Pellets. Thanks

@GhostTacticalTTV

3 жыл бұрын

BBs are metal balls and pellets are sharp pointed chunks of metal

@Skaetdude

3 жыл бұрын

@@GhostTacticalTTV Sorry talking about accuracy.

@damascusthecat7028

3 жыл бұрын

@@Skaetdude they are more accurate but they are more expensive not much more tho

Where do I buy I really like this gun

@MaxCherepenin

3 жыл бұрын

evike.com

anyone put a tracer unit on one of these things?

Does it matter what bb calibre I use?

@Aeternum-YT

Жыл бұрын

Yes, the barrel only supports 6 millimetre bb's

On an average, how many shots per C02 capsule?

@MaxCherepenin

2 жыл бұрын

Hard to say as I have not truly counted shot for shot but I want to say 60-100 per capsule. Since there is no moving parts which uses more gases, you get more out of these revolvers.

Does it come with the co2 cartridges?

@m6dspartan903

4 жыл бұрын

No

The barrel on mine is wobbly.

@MaxCherepenin

2 жыл бұрын

MAy be a defect from the factory. If you just bought it, see what you can do for a return or money back to get another one.

When I get this I’m defo playing Russian roulette with my friends, just shooting eachother in the chest

@itsvaporx9633

2 жыл бұрын

did you do it and how bad fit it hurt

Anyone know of any left handed revolvers for airsoft?

@bimorepolish6866

2 жыл бұрын

technically all revolvers could be left handed

Guys does it use only plastic bbs or something else too?

@aeroyt4208

Жыл бұрын

How much that Gun?

@Aeternum-YT

Жыл бұрын

It isn't recommended to use steel bb's because it can damage the barrel.

10:19 speed loader first insert them on holder load bb's then load weapon. how fast is it. only works if have many speed loaders ready. nobody has LOL its faster insert bb and load it revolder lol

I got this gun and all I can think of is “it’s high noon…”

@alphagamer9059

Жыл бұрын

Bruh

what bbs does it use ?

@MaxCherepenin

3 жыл бұрын

6mm.

Where is the hop up unit to adjust it

From where do you got the gun ?

@MaxCherepenin

4 жыл бұрын

evike.com airsoft version

@MightyMorphineMan

4 жыл бұрын

Thx 😊

@MightyMorphineMan

4 жыл бұрын

And can i buy it in Germany

@okae1758

4 жыл бұрын

Jesus bout to ‘save’ some souls

How much is this revolver

@abdulzahid3120

4 жыл бұрын

Around £200

@jordycomic144

3 жыл бұрын

115 in USD

@Binehoad

3 жыл бұрын

Black Gold alright.

@benp4736

3 жыл бұрын

@@abdulzahid3120 its not £200. its £110 on patrol base

Dose it have an orange tip at first

Can this shoot plastic bbs

@stevenpoe5380

10 ай бұрын

Yes, it shoots 6mm plastic BBs

where do I buy it

@RCascade1996

2 жыл бұрын

Airgundepot.com

Where can i buy this?

@MaxCherepenin

2 жыл бұрын

evike.com

Where’s the orange tip

@MaxCherepenin

2 жыл бұрын

It was removed. All Airsoft guns sold in the US will have an orange tip.

What i dont like of this is the plastic sight

@MaxCherepenin

3 жыл бұрын

Yeah, have to agree there!

Wheee can I get this?

@MaxCherepenin

3 жыл бұрын

evike.com has them

How much ?

@MaxCherepenin

2 жыл бұрын

120 ish I think I paid for this.

When your aiming the gun ngl it looks like a raging bull

Keep handflipping and you,ll screw up the Alignment of the crane!

Is that rick grimes gun?

@scouttrooperhh-1487

3 жыл бұрын

No, rick has a colt python

@earthmagician50

3 жыл бұрын

That’s what I thought too

@matthours1783

2 жыл бұрын

Dietz nuts

"this particulair revolver" no hate but cmon, thats kinde funny

also on a real gun or that toy slamming the cylinder is bad for alignment of a real gun but that's just a simple toy for children and not heavy build so who cares. don't look into business end and watch BB come out

you don't know much about function or real guns, example vents on top of barrel is for esthetics and in theory some function for cooling, release for cylinder is in wrong place, not a 1 to 1 but great toy for you

Can I have that Dan Wesson 715 please🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏🙏👍🙏

@m6dspartan903

4 жыл бұрын

Go buy your own

@adingamoyo2186

4 жыл бұрын

I can't buy one there is no revolver here in the Philippines and it's too expensive I need a side arm

@m6dspartan903

4 жыл бұрын

@@adingamoyo2186 if you cant import one to you than look at others because honestly revolvers aren't practical

@gxooo

4 жыл бұрын

MINECRAFT PLAYZ Just wait until you're old enough lmao..

@adingamoyo2186

4 жыл бұрын

I guess your right

Any thoughts about wingun revolvers? Are they accurate at good revolvers?